Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"high temperature gradient"”.

  1. Inwards vapor diffusion due to high temperature gradient in wall assemblies

    … to a great extent is inwards vapor flows, due to high temperature gradients. Such flows occur, for example, when exterior claddings like brick are wetted by rain and then exposed to solar radiation. This thesis investigates this phenomenon, which can bring large amount of undue moisture within in …

    concordia Download PDF for Inwards vapor diffusion due to high temperature gradient in wall assemblies (opens in a new tab)

  2. Coupling Numerical Analysis of Vibration and Thermal Buckling of an Automotive Brake Disc

    An engaged brake system generates high temperature gradients in the brake rotor and brake pads. This high temperature gradient in turn induces thermal buckling. During high speed rotation, vibration is likely to occur in the system. In terms of a brake disc vibration will occur when there is a …

    denver Repository record for Coupling Numerical Analysis of Vibration and Thermal Buckling of an Automotive Brake Disc (opens in a new tab)

  3. Welding sequence optimization using local/global FEM analysis

    … some problems may be generated due to the high-temperature gradient that is imposed by the welding process, as distortions and residual stresses. Distortions may reach elevated values, making difficult the future assembly of pieces, panels or blocks. Therefore, production becomes slower and …

    brazil-uerj Repository record for Welding sequence optimization using local/global FEM analysis (opens in a new tab)

  4. Thermal Fe Analysis of Powder Bed Fusion Process: Power Input Evaluation and Parameter Sensitivity

    … selected parameters of the PBF process affect temperature distributions, since a high temperature gradient and cooling rate are associated with residual stress and deformation in the built part. Since it was difficult to devise an analytical solution for this transient thermal problem, …

    york Repository record for Thermal Fe Analysis of Powder Bed Fusion Process: Power Input Evaluation and Parameter Sensitivity (opens in a new tab)

  5. Solid-state production of single-crystal aluminum and aluminum-magnesium alloys

    Three sheet materials, including high purity aluminum, commercial purity aluminum, and an aluminum-magnesium alloy with 3 wt% magnesium, were produced into single-crystals in the solid-state. The method, developed in 1939 by T. Fujiwara at Hiroshima University, involves straining a fully …

    texas Repository record for Solid-state production of single-crystal aluminum and aluminum-magnesium alloys (opens in a new tab)

  6. On Thermal Bowing of Concrete Sandwich Wall Panels with Flexible Shear Connectors

    … common issue on sandwich panel walls caused by a temperature differential between a building interior temperature and the environment. The stresses caused by temperature changes in concrete members are widely known in the practice of bridge design, but not on sandwich wall panels. For sandwich …

    utahstate Repository record for On Thermal Bowing of Concrete Sandwich Wall Panels with Flexible Shear Connectors (opens in a new tab)

  7. A temperature-survey in the secondary air mixing zone of the burner of a J33-A-17 turbo jet engine.

    … manner. Increasing fuel-air ratio increased the temperature near the center where the hot core of gasses maintained itself. As the amount of secondary air into the flame tube increased, at a constant fuel-air ratio, the higher temperature gases near the center would be cooled and the gases …

    nps Repository record for A temperature-survey in the secondary air mixing zone of the burner of a J33-A-17 turbo jet engine. (opens in a new tab)

  8. Studies by experimental simulation of rollover and surface vaporisation of cryogens

    … (EVG) in commercial liquid natural gas tanks. Temperature profiles in cryogens near the liquid vapour interface reveal a sublayer with a high temperature gradient in which thermal conduction is dominant and convection processes are intermittent. Measurements of the bulk superheat of the …

    soton Download PDF for Studies by experimental simulation of rollover and surface vaporisation of cryogens (opens in a new tab)

  9. The organic geochemistry and water-rock system across a contact metamorphic profile in the Mancos shale near Crested Butte, Colorado

    … The intrusion, is believed to have established a high temperature gradient across a two mile long sampling profile. This study investigated the isotopic and chemical evolution of both kerogen and extractable organic material. Kerogen displayed a net weight loss of 11% due to methane generation. …

    rice Repository record for The organic geochemistry and water-rock system across a contact metamorphic profile in the Mancos shale near Crested Butte, Colorado (opens in a new tab)

  10. FEM for the Determination of Temperature Distribution in Orthogonal Cutting Process

    … which metal is cut. However, since operating at high speed is found to decrease the tool life, an economic balance which takes into account both the benefits of increased production rate on one hand and the disadvantage of decreased tool life on the other has to be made. Because of the high …

    marquette Repository record for FEM for the Determination of Temperature Distribution in Orthogonal Cutting Process (opens in a new tab)

  11. Energy-Aware Reconfigurable Logic Device Using Spin-based Storage and Carbon Nanotube Switching

    … serious design challenges that include high static power in memories and high leakage power, hindering further integration of CMOS devices. Thus, emerging devices are under intense analysis to overcome these drawbacks caused by transistor size scaling. Spintronics technology provides …

    ucf Repository record for Energy-Aware Reconfigurable Logic Device Using Spin-based Storage and Carbon Nanotube Switching (opens in a new tab)

  12. Non-linearity and dimensionality in optical heating

    … and parallel-beam lithography is having a high-performance electron source (cathode) material. Both of these applications, directly or indirectly, would benefit from a material’s ability to be heated efficiently through localized optical heating. Similarly, the main objective of …

    ubc Repository record for Non-linearity and dimensionality in optical heating (opens in a new tab) Download PDF for Non-linearity and dimensionality in optical heating (opens in a new tab)

  13. Sensible heat storage in a water tank - Influence of the heat source location and the height of the tank on the temperature distribution

    … energy, it is possible to store it at a certain temperature. The study deals with the sensible heat storage and the storing medium consists of an insulated water tank where the water is heated from 20°C towards 35°C by a heat source representing the heat pumps´ condenser. Regarding sensible heat …

    chalmers Repository record for Sensible heat storage in a water tank - Influence of the heat source location and the height of the tank on the temperature distribution (opens in a new tab)

  14. Design and Finite Volume Evaluation of a Counterflow Recuperative Spiral Heat Exchanger for Additive Manufacturing

    … of complex geometries enabling the potential for higher efficiencies for smaller, more compact designs. The aviation sector is a critical aspect of the transition to electrical population and one that cannot be proactively solved with traditional electric motors. To this end, the use of a …

    auckland-tech Repository record for Design and Finite Volume Evaluation of a Counterflow Recuperative Spiral Heat Exchanger for Additive Manufacturing (opens in a new tab)

  15. Flux Expulsion in Coaxial Superconducting Radiofrequency Cavities

    … field direction, cool-down speed, and thermal gradient during transition to the superconducting state. Reducing the magnetic sensitivity can improve cavity performance since in practice it is impossible to eliminate all residual magnetic fields from external sources such as Earth’s natural …

    uvic Repository record for Flux Expulsion in Coaxial Superconducting Radiofrequency Cavities (opens in a new tab)

  16. Bushfire-enhanced wind load on building structures

    … is developed, and applied to three scenarios at high Reynolds numbers (Re > 2.5 × 105). To address the intense computational cost of high-fidelity fire simulations, an efficient geometry-adaptive multi-block solver is developed by employing the Boussinesq approximation and the volumetric heating …

    unsw Repository record for Bushfire-enhanced wind load on building structures (opens in a new tab)

  17. SOFC Modeling Considering Mass and Heat Transfer, Fluid Flow with Internal Reforming Reactions

    … is employed to investigate the effects on the temperature distribution from inlet temperature, oxygen surplus, ionic conductivity and current density for an anode-supported intermediate temperature solid oxide fuel cell (IT-SOFC). The developed model is based on the governing equations of …

    lund Repository record for SOFC Modeling Considering Mass and Heat Transfer, Fluid Flow with Internal Reforming Reactions (opens in a new tab) Download PDF for SOFC Modeling Considering Mass and Heat Transfer, Fluid Flow with Internal Reforming Reactions (opens in a new tab)

  18. Analytical mechanics modeling of residual stress in metal additive manufacturing

    … impede the applicability of the AM such as steep temperature gradient, residual stress, distortion, anisotropy, and heterogeneity in microstructure and mechanical properties. The available knowledge and technology to-date on the description and prediction of the metal AM process have been …

    gatech Repository record for Analytical mechanics modeling of residual stress in metal additive manufacturing (opens in a new tab)

  19. Numerical modelling of flow through packed beds of uniform spheres

    … results confirmed the seemingly irregular temperature trends that were observed in the experimental data, deviating by between 5.44% and 2.29%. From the detail computational fluid dynamics (CFD) results it was possible to attribute these irregularities to the positioning of the …

    nwu-za Repository record for Numerical modelling of flow through packed beds of uniform spheres (opens in a new tab)

Page 1 of 2