Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 89 for “"high temperature processing"”.

  1. High temperature processing of kaolinitic materials

    … is the process of heating a substance, to a temperature below its fusing point, with a resultant loss of water. It is one of the most important techniques currently used to enhance the properties, and therefore value, of kaolin. The overall aim of this project was to provide a better …

    birmingham Download PDF for High temperature processing of kaolinitic materials (opens in a new tab)

  2. Microstructure-Based High Temperature Processing and Failure Analyses of Engineering Alloys under Complex Conditions

    … conditions. In these engineering domains, high-temperature deformation plays a pivotal role, profoundly influencing the ultimate outcomes of industrial applications. Nevertheless, the underlying mechanisms of this deformation remain elusive, largely due to the absence of a …

    utk-theses Repository record for Microstructure-Based High Temperature Processing and Failure Analyses of Engineering Alloys under Complex Conditions (opens in a new tab)

  3. Isolation and Characterization of Thermostable Alpha-Galactosidases for Application of High-Temperature Processing of Soy Molasses

    … were examined for their potential use in processing of soy oligosaccharide waste by-products. The $\alpha$-galactosidase of strain KM-THCJ has been purified to homogeneity and has a MW of ca. 176 kDa and a subunit MW of ca. 88 kDa occurring as a dimer, as determined by gel filtration …

    uiuc Repository record for Isolation and Characterization of Thermostable Alpha-Galactosidases for Application of High-Temperature Processing of Soy Molasses (opens in a new tab)

  4. Fate of β-Lactoglobulin, α-Lactalbumin, and Casein Proteins in Ultrafiltered Concentrated Milk After Ultra-high Temperature Processing

    The problem of age gelation in ultra-high temperature (UHT) sterilized milk retentate (ultrafiltered 3x concentrated) is investigated in this work. Transmission electron microscopy (TEM), utilizing the microcube encapsulation technique and protocols for immunolocalization of milk proteins, provides …

    utahstate Repository record for Fate of β-Lactoglobulin, α-Lactalbumin, and Casein Proteins in Ultrafiltered Concentrated Milk After Ultra-high Temperature Processing (opens in a new tab)

  5. Effects of Homogenization and Ultra-High Temperature Processing on the Properties of Whole Milk Concentrated by a Multiple-Membrane Separation System

    … The concentrated whole milks were ultra-high temperature processed by direct steam injection (140.6°C) followed by flash cooling and two-stage homogenization pressures (2500/500 psi, 3500/700 psi, or 4500/900 psi). The milk concentrates were packaged aseptically and stored at room …

    utahstate Repository record for Effects of Homogenization and Ultra-High Temperature Processing on the Properties of Whole Milk Concentrated by a Multiple-Membrane Separation System (opens in a new tab)

  6. Zeta-Potential of Casein Micelles as a Factor in Age Gelation of Ultra-High Temperature Processed Concentrated Skim Milk

    The effect of ultra-high temperature processing by direct steam injection and room temperature storage of pH-adjusted and unadjusted 3X (volume reduction) skim milk retentate and the effect of storage at various temperatures of 3X skim milk retentate without pH adjustment on their ζ-potential, …

    utahstate Repository record for Zeta-Potential of Casein Micelles as a Factor in Age Gelation of Ultra-High Temperature Processed Concentrated Skim Milk (opens in a new tab)

  7. Heat Transfer and Thermal Process Design in Scraped-Surface Heat Exchangers

    … heat exchanger (SSHE) for use in ultra-high temperature processing of low-acid liquid foods was evaluated using a Contherm 6 x 2 pilot-scale unit. Independent variables tested were steam pressure, blades rotational speed, inlet

    uiuc Repository record for Heat Transfer and Thermal Process Design in Scraped-Surface Heat Exchangers (opens in a new tab)

  8. Microstructural studies of vapor-deposited nickel/ceramic composites

    … compound formation, comparing ion-assisted and high temperature processing.

    uiuc Repository record for Microstructural studies of vapor-deposited nickel/ceramic composites (opens in a new tab)

  9. Chemical Reduction of Silicates by Meteorite Impacts and Lightning Strikes

    … the reduction of Fe as intrinsic to the rapid, high temperature processing during lightning strikes.A thermodynamic modeling code is used to model the formation of moldavite tektites and the reduction of Fe from sediments around the Ries crater. During isentropic cooling from a strong shock, …

    arizona-thes Repository record for Chemical Reduction of Silicates by Meteorite Impacts and Lightning Strikes (opens in a new tab)

  10. Molybdenum Nitride Films in the Back Contact Structure of Flexible Substrate CdTe Solar Cells

    … out of stainless-steel substrates due to high temperature processing can be a cause for poor cell performance. It is necessary to investigate ways of improving the back contact by trying to mitigate the above factors. In this work, Nitrogen has been incorporated in Molybdenum by RF …

    usf Repository record for Molybdenum Nitride Films in the Back Contact Structure of Flexible Substrate CdTe Solar Cells (opens in a new tab)

  11. Thermal Stress Analysis of LCA-based Solid Oxide Fuel Cells

    … characterizes the thermal stress resulting from temperature gradients in hybrid solid oxide fuel cells that are processed using a novel oxide powder slurry technology developed at Georgia Tech. The hybrid solid oxide fuel cell is composed of metallic interconnect and ceramic electrolyte …

    gatech Repository record for Thermal Stress Analysis of LCA-based Solid Oxide Fuel Cells (opens in a new tab)

  12. Aspects of Bi₂Sr₂Ca₂Cu₃O on silicon bolometer fabrication and operation

    … silicon. The buffer layers would not endure the high temperature processing required to produce Bi₂Sr₂Ca₂Cu₃Oy films without cracking or peeling. A mixed buffer layer scheme was used in order to minimize the thermal stresses between the different layers. In situ processing of Bi₂Sr₂Ca₂Cu₃Oy was …

    ubc Repository record for Aspects of Bi₂Sr₂Ca₂Cu₃O on silicon bolometer fabrication and operation (opens in a new tab) Download PDF for Aspects of Bi₂Sr₂Ca₂Cu₃O on silicon bolometer fabrication and operation (opens in a new tab)

  13. Phase transformations in cast superaustenitic stainless steel

    … and Laves can form during casting or exposure to high-temperature processing, which degrade the corrosion and mechanical properties of the material. The goal of this study was to accurately characterize the solid-solid phase transformations seen in cast superaustenitic stainless steels. Heat …

    iastate Repository record for Phase transformations in cast superaustenitic stainless steel (opens in a new tab)

  14. Chalcogen Polymers for Completely Solution-Processed Inorganic Photovoltaics

    … complicated and expensive techniques such as high temperature processing, vacuum deposition methods, and vapor-phase reactions. These production methods require an exorbitantly large capital investment to create new manufacturing facilities, which severely hampers the widespread and rapid …

    washington Repository record for Chalcogen Polymers for Completely Solution-Processed Inorganic Photovoltaics (opens in a new tab)

  15. Development of low temperature fabrication processes of n-ZnO/p-Si optical switch and poly-silicon waveguides for CMOS-compatible multi-layered silicon photonics

    … the current copper interconnects due to their high bandwidth, small footprint, and potentially low power consumption. However, the majority of the research into silicon photonics has been based on the silicon-on insulator (SOI) platform. The focus on the SOI platform has limited the design of …

    soton Download PDF for Development of low temperature fabrication processes of n-ZnO/p-Si optical switch and poly-silicon waveguides for CMOS-compatible multi-layered silicon photonics (opens in a new tab)

  16. Material quality of epitaxially grown silicon wafers for highly efficient solar cells

    When aiming for highly efficient solar cells based on silicon (Si) wafers with a low carbon footprint, epitaxially grown wafers are a promising alternative to commonly used Si wafers fabricated by energy-intensive ingot growth. Epitaxially grown wafers (EpiWafers) are grown on a reusable substrate …

    freiburg-diss Repository record for Material quality of epitaxially grown silicon wafers for highly efficient solar cells (opens in a new tab)

  17. Impact of Precursor Solvent Chemistry on Electrical Properties of Indium Oxide Films for Thin-Film Transistors

    Indium oxide In_2O_3 combines high carrier mobility with optical transparency, making it a promising candidate for next-generation thin-film electronics. However, its electrical performance is highly sensitive to fabrication parameters, particularly the chemistry of solution-based precursors, which …

    rit Repository record for Impact of Precursor Solvent Chemistry on Electrical Properties of Indium Oxide Films for Thin-Film Transistors (opens in a new tab)

  18. Multiphysics Modeling of Microwave-Assisted Calcination of SOEC Perovskite Precursors

    … and time-consuming, often requiring prolonged high-temperature processing. In this thesis, microwave-assisted calcination is investigated as an alternative approach to enable rapid, energy-efficient processing of SOEC per- ovskite precursor powders. Microwave heating offers distinct advantages, …

    wvu Repository record for Multiphysics Modeling of Microwave-Assisted Calcination of SOEC Perovskite Precursors (opens in a new tab)

Page 1 of 5