Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 13 of 13 for “"high temperature testing"”.

  1. A Hybrid Testing Platform for Realistic Characterization of Infrastructure Sensor Technology

    … and repair of civil infrastructures such as highway bridges, an increasing number of structural health monitoring sensors and other non-destructive evaluation (NDE) devices have begun to be implemented on these structures. Before these health monitoring sensors can be implemented on a large …

    maryland Repository record for A Hybrid Testing Platform for Realistic Characterization of Infrastructure Sensor Technology (opens in a new tab)

  2. Development of a Novel Molten Salt Corrosion Coupon Sampling Measurement Apparatus

    … aiding further progress of this technology to a higher implementation standard. Five designs are iterated upon from these historical works, concluding with a final prototype for study in simulation within SolidWorks fluid simulations for coupon performance and possible system impacts. Later, to …

    gatech Repository record for Development of a Novel Molten Salt Corrosion Coupon Sampling Measurement Apparatus (opens in a new tab)

  3. Characterization of the cooling and transformation of steels on a run-out table of hot-strip mill

    … the Stelco Lake Erie Works hot strip mill. The temperature data was used in the thermal model to calculate an overall heat transfer coefficient for a laminar water bank of 1 kW/m²°C. Isothermal diametral dilatometer testing was used to generate phase transformation kinetics for a 0.34 weight …

    ubc Repository record for Characterization of the cooling and transformation of steels on a run-out table of hot-strip mill (opens in a new tab) Download PDF for Characterization of the cooling and transformation of steels on a run-out table of hot-strip mill (opens in a new tab)

  4. Evaluation and robustness of wide bandgap semiconductor devices

    … using forms of reliability and robustness testing. This was performed to determine the devices’ limitations through robustness testing and investigate their operation over time through reliability testing. Robustness testing was performed via short circuit testing on SiC (silicon carbide) …

    ttu Repository record for Evaluation and robustness of wide bandgap semiconductor devices (opens in a new tab) Embargoed until 2027-05-01

  5. Aerosol Jet Printing of Alumina Insulation Layer for High-Temperature Sensing Applications

    … distinct advantages, including a relatively high degree of material flexibility, high micro-scale precision, and an ability to print onto virtually any exposed surface. This versatility enables diverse fabrication of a variety of micro-scale electronic components from capacitors, traces, …

    waterloo Repository record for Aerosol Jet Printing of Alumina Insulation Layer for High-Temperature Sensing Applications (opens in a new tab)

  6. REDUCING ERROR AND UNCERTAINTY OF INFRARED THERMOGRAPHY IN HIGH-TEMPERATURE FLOWS

    During high-speed flight, a vehicle generates a significant amount of heat from friction. This creates an extreme environment where high-temperature dynamics become relevant. To better understand the complexities of high-speed flight, ground testing allows evaluation of these vehicles but requires …

    utk-theses Repository record for REDUCING ERROR AND UNCERTAINTY OF INFRARED THERMOGRAPHY IN HIGH-TEMPERATURE FLOWS (opens in a new tab)

  7. Determination of the fracture strength of brittle material thin films at high temperature using MEMS

    … mechanical properties make them suitable for high-temperature environments where MEMS are exposed to different types of failure modes such as fractures and fast aging. A fracture happens when the material splits into two or more pieces due to exceeding the material’s maximum strength. High …

    waterloo Repository record for Determination of the fracture strength of brittle material thin films at high temperature using MEMS (opens in a new tab)

  8. Experimental identification of structural force coefficients in a bump-type foil bearing

    … in oil-free turbomachinery. The effect of shaft temperature on the measured structural force response of foil bearings is of importance for reliable high temperature applications. During actual operation with shaft rotation, the bearing structural parameters are coupled to the effects of a …

    tamu Repository record for Experimental identification of structural force coefficients in a bump-type foil bearing (opens in a new tab)

  9. Modified Transient Hot-Wire Needle Probe for Experimentally Measuring Thermal Conductivity of Molten Salts

    Molten salts are high-temperature heat transfer fluids intended for cooling and/or storage purposes in a variety of energy applications. The current work seeks to ultimately study the thermophysical properties of fluoride and chloride salts, which are commonly considered for use in advanced nuclear …

    byu Repository record for Modified Transient Hot-Wire Needle Probe for Experimentally Measuring Thermal Conductivity of Molten Salts (opens in a new tab) Download PDF for Modified Transient Hot-Wire Needle Probe for Experimentally Measuring Thermal Conductivity of Molten Salts (opens in a new tab)

  10. Dynamic abnormal grain growth of selected refractory metals

    … centimeters in length are produced at elevated temperature during the application of strain. DAGG was previously demonstrated in commercial-purity molybdenum (Mo) materials. This is the first investigation to confirm DAGG in another material, tantalum (Ta). Previous experiments initiated and …

    texas Repository record for Dynamic abnormal grain growth of selected refractory metals (opens in a new tab)

  11. Improved Digital Image Correlation Techniques at High Speed and High Temperature

    In extreme environments, such as hot-fire rocket testing, gathering strain data can be challenging due to temperature constraints. Traditional methods for measuring material deformation such as strain gages, a small device attached to a test specimen, cannot withstand the extreme temperature and …

    utahstate Repository record for Improved Digital Image Correlation Techniques at High Speed and High Temperature (opens in a new tab)

  12. Additively Manufactured DIC Patterns for Extreme Environments and the Emerging Technology Impact on the Licensing of Nuclear Reactors

    … by combining technical and policy influences to highlight the need for improvements in the Nuclear Regulatory Commission’s (NRC) license process to promote and reduce the time to innovate towards advanced reactor construction. In Chapter Two and Three, this work focuses on the development of …

    boise Repository record for Additively Manufactured DIC Patterns for Extreme Environments and the Emerging Technology Impact on the Licensing of Nuclear Reactors (opens in a new tab)

  13. The Role of Slip System Activation on Ni-Based Superalloy High Temperature Fatigue

    … These materials are desirable due to their high strength, resistance to creep, corrosive environment, and high temperature. It has been well documented that material fatigue is characterized by material microstructure, type of loading, and other parameters. Currently, research into the …

    embry-riddle Repository record for The Role of Slip System Activation on Ni-Based Superalloy High Temperature Fatigue (opens in a new tab)