Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 103 for “"high-speed flow"”.

  1. Fluid actuators for high speed flow control

    In order to extend fluid-based flow control techniques that have been demonstrated at low subsonic speeds to high speed flows, it is necessary to develop actuators having sufficient momentum to control and manipulate high speed flows. Two fluidic actuation approaches are developed where the control …

    gatech Repository record for Fluid actuators for high speed flow control (opens in a new tab)

  2. Unstructured technology for high speed flow simulations

    … placed on the effects of the chemistry model in flows where ionization and dissociation are dominant characteristics of the flow field. Laminar and turbulent solutions over a flat plate are presented and compared to exact solutions and experimental data. Three dimensional higher order solutions …

    vt Repository record for Unstructured technology for high speed flow simulations (opens in a new tab)

  3. Multiparameter optical diagnostics for high-speed flow applications

    … optical diagnostic techniques for research in high-speed flow applications. This is motivated by the need to extract as much information as possible in physics-coupled, multidimensional flows, and flows generated in short duration test facilities.</p> <p>Fluorescent Particle Image Velocimetry …

    oxford Repository record for Multiparameter optical diagnostics for high-speed flow applications (opens in a new tab)

  4. High speed flow measurement devices for gasoline fuel injectors

    … and on-engine direct mass measurements of fuel flow in individual cylinders of an engine due to the lack of appropriate measurement techniques. To achieve this, in this thesis two potential solutions: pressure methods (One Pressure Transducer Method (OPTM) and Two Pressure Transducer Method …

    oxford Repository record for High speed flow measurement devices for gasoline fuel injectors (opens in a new tab)

  5. AERODYNAMIC SEPARATION OF FRAGMENTED BODIES IN HIGH-SPEED FLOW

    … assorted threats. The relative risks of each are highly dependent on the details of the unavoidable structural disruption that occurs and the subsequent aerodynamic separation sequence, so accurate prediction of fragment trajectories is required for threat mitigation. However, the physics of …

    maryland Repository record for AERODYNAMIC SEPARATION OF FRAGMENTED BODIES IN HIGH-SPEED FLOW (opens in a new tab)

  6. Topology and Grid Adaption for High-Speed Flow Computations

    … procedure is presented for computation of high-speed flow over complex three-dimensional configurations. This includes the grid generation and solution algorithm for Navier-Stokes equations in a general three-dimensional curvilinear coordinate system. The flow field is simulated on the …

    odu Repository record for Topology and Grid Adaption for High-Speed Flow Computations (opens in a new tab)

  7. Flame stabilization by a plasma driven radical jet in a high speed flow

    … afterburners combustion is stabilized by the high temperature, recirculating region behind bluff body flame holders, such as V-gutters. Blocking the high speed flow with bluff bodies causes a significant pressure drop, and heating the flame holder by the hot combustion product causes a thermal …

    gatech Repository record for Flame stabilization by a plasma driven radical jet in a high speed flow (opens in a new tab)

  8. Performance Modeling and Scaling of Reactive High-Speed Flow Solvers for Hybrid Rocket Simulations

    … due to the need to resolve compressible flow, detailed chemical kinetics, and thermal radiation at small spatial and temporal scales. This dissertation evaluates how the reactive finite-volume CFD solver ABLATE performs and scales across configurations including flat-plate burners, slab …

    buffalo Repository record for Performance Modeling and Scaling of Reactive High-Speed Flow Solvers for Hybrid Rocket Simulations (opens in a new tab)

  9. Characterization of High Momentum Flux Combustion Powered Fluidic Actuators for High Speed Flow Control

    The performance of a high-power small-scale combustion-based fluidic actuator for high-speed flow control applications is characterized with specific focus on comparisons between premixed and nonpremixed operating modes for the device. Momentary (pulsed) actuation jets are produced by the ignition …

    gatech Repository record for Characterization of High Momentum Flux Combustion Powered Fluidic Actuators for High Speed Flow Control (opens in a new tab)

  10. Simulation of Coupled Conjugate Heat Transfer and Nonequilibrium Boundary Layer Dynamics in High-Speed Flow Environments

    … turbulent boundary layers, and combustion puts high-speed, high-enthalpy vehicles at risk for thermal fatigue and failure. Accurately predicting and controlling the interaction of heat transfer and compressible turbulent boundary layers is critical to optimal design of these vehicles. This …

    gatech Repository record for Simulation of Coupled Conjugate Heat Transfer and Nonequilibrium Boundary Layer Dynamics in High-Speed Flow Environments (opens in a new tab)

  11. The influence of hole geometry and metering length on flm cooling effectiveness of laid-back fan-shaped holes in compressible high-speed flow conditions

    … surface temperature measurements. Results highlight that shorter metering lengths generally provide superior cooling, particularly under increasing pressure ratios. An investigation was done to determine how well film cooling works for areas of a turbine airfoil where the wall thickness is …

    texas Repository record for The influence of hole geometry and metering length on flm cooling effectiveness of laid-back fan-shaped holes in compressible high-speed flow conditions (opens in a new tab)

  12. Numerical simulations and analyses of shock wave-boundary layer interactions

    … is becoming one of the benchmark problems in the high-speed flow modeling and simulation community. The interaction of shock wave with the boundary layer is a very complex phenomenon that requires high-fidelity numerical methods like direct numerical simulation (DNS) and large-eddy simulation …

    msu Repository record for Numerical simulations and analyses of shock wave-boundary layer interactions (opens in a new tab)

  13. Cavity flow oscillation analysis and water table simulation

    <p>Under certain conditions, high speed flow over closed cavities becomes unstable, leading to large flow flucuations inside and around the cavities. This phenomenon is simulated for a 1.5-inch deep by three-inch long cavity using a water table. Upstream blowing is used in an attempt to supress the …

    ut-knoxville Repository record for Cavity flow oscillation analysis and water table simulation (opens in a new tab)

  14. Investigation of Realistic Material Surface Roughness on a Supersonic Boundary Layer

    … importance and scale of roughness effects on the high-speed flow environment, as well as the flight body, is still an area of active research. As ground testing capabilities continue to improve, as well as diagnostic techniques, new aspect of roughnesses' relation to the high-speed flow …

    ut-knoxville Repository record for Investigation of Realistic Material Surface Roughness on a Supersonic Boundary Layer (opens in a new tab)

  15. A Novel Dual-Imaging Approach for Visualizing Multiphase and Droplet Interactions including Shock-Driven Flows

    … including supersonic and hypersonic systems in highly humid conditions, as well as the ongoing space exploration efforts from global space centers as well as private space companies. Understanding the interactions between shockwaves and droplets that impact on solid surfaces is critical due to …

    cuny Repository record for A Novel Dual-Imaging Approach for Visualizing Multiphase and Droplet Interactions including Shock-Driven Flows (opens in a new tab)

  16. Vortex Dynamics within the Laminar Separation Bubble over a NACA 0018 Airfoil at Low Reynolds Numbers

    … Techniques used during investigation include high-speed flow visualization synchronized with embedded microphones for pressure measurements. High-speed flow visualizations reveal the formation of coherent structures within the laminar separation bubble. These structures develop from …

    waterloo Repository record for Vortex Dynamics within the Laminar Separation Bubble over a NACA 0018 Airfoil at Low Reynolds Numbers (opens in a new tab)

  17. The Later Stages of Transition over a NACA0018 Airfoil at a Low Reynolds Number

    … to perform measurements over the model. Novel high-speed flow visualization performed with a smoke-wire placed within the separated shear layer showed that roll-up vortices are shed within separation bubbles forming on the suction side of the airfoil. The structures were found to convect …

    waterloo Repository record for The Later Stages of Transition over a NACA0018 Airfoil at a Low Reynolds Number (opens in a new tab)

Page 1 of 6