Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"higher-order beam"”.

  1. Linear and non-linear elastic stability of beams by higher order beam theories

    … the linear and non-linear elastic stability of beams is investigated by means of higher order beam theories. In order to do so, the first step of this doctoral dissertation is the examination of flexural-torsional buckling of composite beams taking into account warping (out-of-plane deformation) …

    greece Repository record for Linear and non-linear elastic stability of beams by higher order beam theories (opens in a new tab)

  2. A Nonlinear Finite Element Model for Steel-concrete Composite Beam using a Higher-order Beam Theory

    Steel-concrete composite beams are commonly used in bridges, buildings and other civil engineering infrastructure for their superior structural performances. This is achieved by exploiting the typical configuration of this structural system where the concrete slab is primarily utilised to resist …

    adelaide Repository record for A Nonlinear Finite Element Model for Steel-concrete Composite Beam using a Higher-order Beam Theory (opens in a new tab)

  3. An analytical model for two-layered composite beams with partial shear interaction based on a higher order beam theory

    … and structural performances. A composite beam consisting of two material layers, such as steel-concrete, steel-timber, and timber-timber is typically used in the construction industry to enhance the overall performance due to a proper utilization of two material layers in this structural …

    adelaide Repository record for An analytical model for two-layered composite beams with partial shear interaction based on a higher order beam theory (opens in a new tab)

  4. Failure analysis of blast loaded ductile beam

    … elastic-plastic finite element analysis of the higher order beam is presented to predict the mode II and III failure of impulsively loaded ductile clamped beams. The variational equation of motion of the problem is first obtained by using the principle of virtual work and the Total Lagrangian …

    ubc Repository record for Failure analysis of blast loaded ductile beam (opens in a new tab) Download PDF for Failure analysis of blast loaded ductile beam (opens in a new tab)

  5. Beam Modes of Lasers with Misaligned Complex Optical Elements

    … a transfer matrix technique known as generalized beam method has been derived to treat misalignment effects in complex optical systems. Previous theories used numerical or ad hoc analytical solutions to a complicated diffraction integral. The generalized beam matrix formalism was also extended to …

    portland-state Repository record for Beam Modes of Lasers with Misaligned Complex Optical Elements (opens in a new tab)

  6. Strong-form governing equations and solutions for variable kinematic beam theories with practical applications

    … of the strongform governing equations of beam, plate and shell structures. In this thesis, attention is primarily focused on strong-form solutions of refined beam theories. In particular, higher-order beam models are developed within the framework of the Carrera Unified Formulation (CUF), …

    city-london Download PDF for Strong-form governing equations and solutions for variable kinematic beam theories with practical applications (opens in a new tab)

  7. Random Vibration Analysis of Higher-Order Nonlinear Beams and Composite Plates with Applications of ARMA Models

    In this work, the random vibration of higher-order nonlinear beams and composite plates subjected to stochastic loading is studied. The fourth-order nonlinear beam equation is examined to study the effect of rotary inertia and shear deformation on the root mean square values of displacement …

    vt Repository record for Random Vibration Analysis of Higher-Order Nonlinear Beams and Composite Plates with Applications of ARMA Models (opens in a new tab)

  8. Finite element beam model for piezoelectric energy harvesting using higher order shear deformation theory

    … harvesters are unimorph cantilever composite beams, which have a single active piezoceramic layer and a passive substrate or a bimorph that has a passive substrate sandwiched between two piezoceramic layers. Power is captured across a coupled load resistor circuit in either a series or …

    clemson Repository record for Finite element beam model for piezoelectric energy harvesting using higher order shear deformation theory (opens in a new tab)

  9. A variable kinematic one-dimensional model for aeroelasticity and dynamic analysis of multi-layered rotors

    … to a set of variables that only depends on the beam-axis coordinate. Besides the well-known classical beam theories, several refined kinematic models have been proposed, to study the stability of rotating blades and shafts. However, when these structures are highly deformable or the material …

    poli-torino Repository record for A variable kinematic one-dimensional model for aeroelasticity and dynamic analysis of multi-layered rotors (opens in a new tab)

  10. Generalized straight and curved beam theories with isogeometric analyis

    … employed in some of the numerical examples in order to investigate their efficiency in increasing accuracy. In Chapter 3, the AEM, a boundary element based method, is employed for the analysis of a homogenous beam element of arbitrary cross section (thin- or thick- walled) taking into account …

    greece Repository record for Generalized straight and curved beam theories with isogeometric analyis (opens in a new tab)

  11. Multiscale approaches for the failure analysis of fiber-reinforced composite structures using the 1D CUF

    … on the 1D Carrera Unified Formulation (CUF). 1D higher order elements are very powerful tools for multiscale analysis since they provide accurate stress and strain fields with very low computational costs.

    poli-torino Repository record for Multiscale approaches for the failure analysis of fiber-reinforced composite structures using the 1D CUF (opens in a new tab)

  12. Analysis of Steel Beams Strengthened with Adhesively - Bonded GFRP Plates

    … the strength of GFRP-strengthened steel beams. Also, quantifying the strength of the resulting steel-adhesive-GFRP composite represents a technical challenge as it involves several potential modes of failure (e.g., local buckling, lateral-torsional buckling, cross-sectional strength, GFRP …

    ottawa-retro Repository record for Analysis of Steel Beams Strengthened with Adhesively - Bonded GFRP Plates (opens in a new tab)

  13. Modeling the Torsional Behaviour of Segmented Concrete Towers based on Warping Theory

    … long-term realization of even more innovative, higher and safer tower concepts. With this calculation approach, the practical engineer always remains in control of his or her own actions. Accordingly, the results can be used as a basis for evaluation without much need for interpretation, e.g. to …

    qucosa-diss

  14. Space charge and lattice driven resonances at the CERN injectors

    … for vertical tunes above Qy=6.25, especially for beams with large space charge tune shift. The work presented here shows that this behaviour is associated to structure resonances excited by space charge due to the highly symmetric accelerator lattice of the PS, typical for first generation …

    greece Repository record for Space charge and lattice driven resonances at the CERN injectors (opens in a new tab)