Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"hinge model"”.
-
Developing a Plastic Hinge Model for RC Beams Prone to Progressive Collapse
… The objective of this study is to assess the modeling parameters for reinforced concrete (RC) beams specified in the GSA 2013. Three types of RC buildings located in high, moderate and low seismic zones in Canada are designed according to the 2010 edition of the National Building Code of …
-
Plastic postbuckling behaviour of axially compressed cylindrical shells
… bulging is most suitably described by a three-hinge model. The bulge length of the collapse mode can be predicted approximately by using the upper-bound theorem. Agreement with the theoretical and experimental results is satisfactory.
-
HIGH-STRENGTH STEEL BARS IN EARTHQUAKE-RESISTANT T-SHAPED CONCRETE WALLS
… conducted to evaluate the use of the plastic hinge model for estimating the deformation capacity of the walls and the maximum strain demands. The use of the plastic hinge model was conservative for estimating wall deformation capacity with simple rules for the plastic hinge length depending on …
-
Pseudotachylyte remanence confirms generation along low-angle normal fault planes
… of these structures is split between support for models where normal faults initiate at favorable dips and subsequently rotate to low-angle orientations (e.g. rolling hinge model) and belief that field relationships show that LANFs were active at or near their present orientation. Using …
-
Predicting the shear behavior of reinforced concrete columns with compression-dominant strain states under lateral loads
… and existing design provisions and macro-models often lose accuracy. This study develops a rational, mechanically-based framework to predict the shear behavior of such columns under both monotonic and reversed cyclic lateral loading. First, an analytical shear capacity model extending the …
-
Differential Drag-Based Orbital Maneuvers using Origami-Inspired Drag Area Modulation
… power levels throughout the mission. A bar-and-hinge model is utilized to simulate dynamic unfolding behavior of the origami panels, and a proportional-integral-derivative control scheme is utilized for hinge actuation to achieve desired angles. Overall, this integrated approach not only …
-
Simulation methods for the temporal and frequency dynamics of optical communication systems
I examine two methods for modeling the temporal dynamics of optical communication networks that rapidly and accurately simulate the statistics of unlikely but physically significant system configurations. First, I implement a fiber emulator based upon a random uniform walk over the Poincaré sphere …
-
Temporal Dynamics of Polarization and Polarization Mode Dispersion and Influence on Optical Fiber Systems
… are measured. We provide a theoretical model that accounts for the dynamic birefringence generated due to the impact. Next, an experimental technique is proposed to detect the location of temporal polarization activity in WDM systems. It is demonstrated theoretically and in simulations …
-
Modeling strategies for structures using ductile concrete materials in seismic applications
… the development of efficient numerical models and simulation techniques that can predict the nonlinear response of structures using ductile concrete materials. In this dissertation, modeling tools and methods are developed to simulate the flexural response of HPFRCC members and are …
-
Seismic Performance Design Criteria of Existing Bridge Bent Plastic Hinge Region and Rapid Repair Measures of Earthquake Damaged Bridges Considering Future Resilience
… examined with respect to the existing plastic hinge model to be used for limit state evaluation. A rapid repair method incorporating semi-permanent installation was also developed, anticipating the need for quick measures following the Cascadia Subduction Zone (CSZ) earthquake, which is …
-
Mechanics Modeling of Non-rigid Origami: From Qualitative to Quantitative Accuracy
… formulating a high-fidelity simulation model for origami is crucial, especially when large amplitude deformation/rotation exists during folding. The currently available origami simulation models can be categorized into three branches: rigid-facet models, bar-hinge models, and finite …
-
Earthquake-Resistant T-Shaped Concrete Walls with High-Strength Reinforcement
This study examined the effects of the mechanical properties of high-strength reinforcement on the seismic behavior of concrete walls. The primary variables were the yield strength f_y and the tensile-to-yield strength ratio f_t/f_y. Two large-scale T-shaped structural walls were subjected to …
-
On Advancing the Topology Optimization Technique to Compliant Mechanisms and Robots
… was achieved by a proposed super flexure hinge element and a design criterion called input stroke criterion in addition to the traditional stiffness-flexibility criterion. Both theoretical exploration and CM design examples are presented to show the effectiveness of the proposed approach. …
-
Deployable ground anchors: Analysis for coastal resilience applications
Submission published under a 24 month embargo labeled 'U of I Access', the embargo will last until 2027-05-01
-
Processes of magmatic and tectonic accretion of oceanic lithosphere at mid-ocean ridges
… of the area required different inversion and modelling procedures. A broad variety of methods for interpretation of the collected geophysical data were applied to gain a subsurface image and to allow a geological reconstruction. First arrival seismic tomography, joint refraction and reflection …
-
Μία νέα μέθοδος επέκτασης των αναλύσεων στατικής οριακής ώθησης σε ασύμμετρα κτίρια και συγκρίσεις με υφιστάμενες μεθόδους
… A properly formed, simple, 3 D.O.F. one-story model, with shear-beam type elements is used in order to quantify the effects of inelastic torsion on the overall seismic response of the building. Using results from non-linear time history analyses of the simple model, correction coefficients for …
-
Structural geometry of the Rocky Valley thrust system in the vicinity of New Market, Tennessee
… of the thrust sheet through an upper ramp hinge. The Rome-Conasauga structural lithic unit is interpreted as an incompetent unit that is easily faulted while the upper Conasauga-Knox structural lithic unit is a competent unit that is not readily faulted. Consequently, broad-hinged, gentle, …
-
CHARACTERISATION OF THE TENSILE BEHAVIOUR OF UHPFRC BY MEANS OF FOUR-POINT BENDING TESTS
Combining the most recent technologies in concrete, Ultra-High-Performance Fibre-Reinforced Concrete (UHPFRC) arises as a promising material for the near future. UHPFRC have shown how flexible concrete can be to adapt to the ever-changing social and environmental demands. With its high flexibility …
-
Tailoring stiffness of deployable origami structures
Embargo set by: Seth Robbins for item 98713 Lift date: 2019-03-01T17:03:32Z Reason: Author requested closed access (OA after 2yrs) in Vireo ETD system