Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"hoop strain"”.

  1. Assessment of Current ACI 440.2R-08 Design Guidelines and Evaluation of Hoop Strain in FRP Confined Concrete

    … an investigation of the transfer of strain between FRP layers in FRP confined concrete specimens was completed. Glass fibers were applied to plain concrete specimens, with the number of layers ranging from one to three layers. Strain gages were placed on every layer to perform an …

    texas-state Repository record for Assessment of Current ACI 440.2R-08 Design Guidelines and Evaluation of Hoop Strain in FRP Confined Concrete (opens in a new tab)

  2. BISON Analysis of Silicon Carbide Cladding Separate Effects Mechanical Tests that Mimic Reactivity Initiated Accidents

    … SiC-f/SiC-m cladding tubes to burst at ~0.2% hoop strain. A parametric study was performed to exercise the capabilities of the BISON elasticity models. A Sobol sensitivity study was also performed to not only verify the results of the parametric study that demonstrated the ultimate tensile …

    ut-knoxville Repository record for BISON Analysis of Silicon Carbide Cladding Separate Effects Mechanical Tests that Mimic Reactivity Initiated Accidents (opens in a new tab)

  3. Experimentation of Composite Repair Techniques for Pipelines Using Finite Element Analysis with Respect to ASME PCC-2, ISO 24817, and Parametric Models

    … neither ASME nor ISO standards create max hoop strain compliant composite wraps across all wall thinning percentages and live pressures. A parametrically modified version of the ASME PCC-2 standard results in code compliant wraps that more efficiently satisfy the max hoop strain requirement …

    tamu Repository record for Experimentation of Composite Repair Techniques for Pipelines Using Finite Element Analysis with Respect to ASME PCC-2, ISO 24817, and Parametric Models (opens in a new tab)

  4. A Study of Measuring Intracranial Pressure Using a Non-Invasive Piezoelectric Sensor

    … of the human head to measure the integrated hoop strain. Using this hoop strain, the pressure is then calculated from a known coupling factor of strain to pressure outputted from finite element modeling simulations. The coupling factor is then incorporated into a final calibration factor to …

    vt Repository record for A Study of Measuring Intracranial Pressure Using a Non-Invasive Piezoelectric Sensor (opens in a new tab)

  5. Improving self-pierce rivet performance through processing and alloy development

    … have been attributed to a high degree of hoop strain that forms when the rivets are flared beyond the design specifications. A method to replicate the rivet flaring procedure under laboratory conditions has been developed by flaring the rivets through various strain paths to induce a hoop …

    colo-mines Repository record for Improving self-pierce rivet performance through processing and alloy development (opens in a new tab)

  6. Experimental study of axial compressive behavior of a hyper-elastic annular seal constrained in a pipe

    … behavior of an annular rubber seal constrained in a pipe and the interaction between the pipe and the seal was studied experimentally using a specially designed test fixture that allowed the concentric alignment of the seal within the pipe and its axial compression using an …

    manitoba Repository record for Experimental study of axial compressive behavior of a hyper-elastic annular seal constrained in a pipe (opens in a new tab)

  7. A numerical study of the axial compressive behavior of a hyperelastic annular seal constrained in a pipe

    … behavior of an annular rubber seal constrained concentrically in a pipe. The elastomer material composing the seal, was experimentally characterized for its mechanical, frictional, and viscoelastic properties and modelled using models developed by Yeoh, Thirion, and Prony respectively. …

    manitoba Repository record for A numerical study of the axial compressive behavior of a hyperelastic annular seal constrained in a pipe (opens in a new tab)

  8. DETERMINATION OF ROUND EXIT VELOCITY USING FIBER BRAGG GRATING SENSORS

    … the use of fiber Bragg grating sensors for strain, temperature and pressure measurement has been an area of active research in the past decade. In this thesis, an experimental technique to measure the exit velocity of projectiles in field-deployed gun barrels is presented. In-fiber Bragg …

    maryland Repository record for DETERMINATION OF ROUND EXIT VELOCITY USING FIBER BRAGG GRATING SENSORS (opens in a new tab)

  9. A fabrication stress model for axisymmetric filament wound composite structures

    … and fiber stiffness degradation in a compressive strain state. Two case studies were selected to evaluate and to illustrate the use of the fabrication stress model: the space shuttle booster Joint overwrap and a filament wound composite bottle. The analysis results of the overwrap case study show …

    vt Repository record for A fabrication stress model for axisymmetric filament wound composite structures (opens in a new tab)

  10. Strain localization and failure initiation in cylindrical aluminum tubes subjected to radial impulse loading

    In this study, we examine strain localization and failure initiation in cylindrical aluminum tubes subjected to radial impulse loading. This thesis is divided into two parts: the first part explores strain localization in aluminum 6061-T6 tubes undergoing radial expansion. An electromagnetically …

    texas Repository record for Strain localization and failure initiation in cylindrical aluminum tubes subjected to radial impulse loading (opens in a new tab)

  11. PERFORMANCE AND SAFETY CONSIDERATIONS FOR THE IMPLEMENTATION OF A PWR-BASED INTEGRATED ENERGY SYSTEM

    … analysis found that plenum pressure and cladding hoop strain limits, though infrequently, were exceeded during normal operation with flexible parameters. This work concluded that the life-average linear heat rate and the power scaling factor were highly influential inputs, while the ramp rate and …

    utk-theses Repository record for PERFORMANCE AND SAFETY CONSIDERATIONS FOR THE IMPLEMENTATION OF A PWR-BASED INTEGRATED ENERGY SYSTEM (opens in a new tab) Embargoed until 2027-05-01

  12. Time-dependent circumferential deformation of cortical bone subjected to internal radial loading

    … this study were to (a) study the time-dependent hoop response of femoral bone to an intramedullary radial load, (b) study the creep response of specimens under constant load until failure, and (c) assess damage morphology and determine the damage mechanisms in cortical bone due to a radial …

    wvu Repository record for Time-dependent circumferential deformation of cortical bone subjected to internal radial loading (opens in a new tab)

  13. Deformation Processes of Metallic Open-Cell Foam Supported Sheet Metals

    … reduction. The prediction in both geometric hoop strain failure criterion and shear strain failure in the finite element analysis were matched and agreed with the experimental result. For the hydroforming process, the experimental result indicated that the major failure mode is the adhesive …

    tamu Repository record for Deformation Processes of Metallic Open-Cell Foam Supported Sheet Metals (opens in a new tab)

  14. Modelling of the filament-winding fabrication process

    … performed by comparing experimental pressure and strain data, for the fabrication of a filament wound bottle, with results of an analytical model. The final analytical results using consecutive models of the filament wound bottle show reasonable agreement with experimental pressure and hoop strain …

    vt Repository record for Modelling of the filament-winding fabrication process (opens in a new tab)

  15. Behavior of FRP wrapped concrete cylinders

    … pressure generated by the wrap in hoop direction.;The mechanical properties were compared to those of non-wrapped specimens. An increase in strength of 1.5--3 times and hoop strain of 10--20 times was noticed. The increase in axial strength of 3" x 6" concrete cylinder per layer of …

    wvu Repository record for Behavior of FRP wrapped concrete cylinders (opens in a new tab)

  16. Deformation studies near hard particles in a superalloy

    … the use of a relatively new technique of strain measurement, high resolution electron backscatter diffraction (HR-EBSD) to measure local deformation fields. The heart of the HR-EBSD technique lies in comparing regions in EBSD patterns from a strained region of a sample to those in a …

    oxford Repository record for Deformation studies near hard particles in a superalloy (opens in a new tab)

  17. Using GPS to Quantify Three Dimensional Storage and Aquifer Deformation in the Virgin River Valley, NV

    … simulations have shown that horizontal strain is significant. A field based investigation in Mesquite, NV, was undertaken from May to July, 2003, for the purpose of evaluating the significance of horizontal strain during an aquifer test. The hydraulic heads in the aquifer were monitored …

    vt Repository record for Using GPS to Quantify Three Dimensional Storage and Aquifer Deformation in the Virgin River Valley, NV (opens in a new tab)

  18. Analysis and Optimization of Autofrettaged and Shrink-Fitted Compound Cylinders under Thermo-Mechanical Loads

    … by inducing near the bore compressive residual hoop stresses. Shrink-fit and autofrettage processes have been effectively applied to generate favorable compressive residual stresses. The main goal of this research study is to fundamentally investigate the compound cylinders subjected to …

    concordia Download PDF for Analysis and Optimization of Autofrettaged and Shrink-Fitted Compound Cylinders under Thermo-Mechanical Loads (opens in a new tab)

  19. Mechanical Characterization and Non-Destructive Evaluation of SiCF-SiCM Composite Tubing with the Impulse Excitation Technique

    … rubber plug compression technique and with strain gauge installed on the internal surface of the composite tube. The experimentation performed in this thesis focuses on: 1) the utilization of impulse excitation as a non-destructive evaluation method to determine mechanical properties and to …

    south-carolina Repository record for Mechanical Characterization and Non-Destructive Evaluation of SiCF-SiCM Composite Tubing with the Impulse Excitation Technique (opens in a new tab)

  20. Novel, low-cost, CFRP pressure vessel design for hydrogen fuel cell applications

    … the burst pressure. The stress analysis and strain behaviour of the CFRP tube were modelled using the Classical Lamination Theory. Specimens were made using the same CFRP material as the tube and were tensile tested to give an initial set of approximate properties to be used in the design …

    cape-town Repository record for Novel, low-cost, CFRP pressure vessel design for hydrogen fuel cell applications (opens in a new tab)

Page 1 of 2