Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 58 for “"hot-compression"”.
-
Hot Compression Behaviour of Two-Phase Ti-6A1-4V: Experiments and State-Variable Modelling
The flow stress behaviour of two-phase Ti-6A1-4V and its individual α and β phases has been characterised during isothermal forging at temperatures of 850-1050°C and strain rates of 0.3-0.003/s. The influence of initial pre-form microstructure has also been investigated by heat-treating the …
-
Investigation of Surface Topography Effects on Metal Flow Under Lubricated Hot Compression of Aluminum
… flow and the friction factor under lubricated hot compression. 6061-T6 aluminum rings and square bar stock specimens were compressed on H-13 tool steel platens machined with a unidirectional lay pattern to six different roughnesses between a R 10 and 240 μin. A lab based hydraulic press mounted …
-
Investigation of Surface Topology Effects on Metal Flow of Aluminum and Steel During Hot Compression
… flow and the friction factor under lubricated hot compression. 6061-T6 aluminum and AISI 1018 steel rings and rectangular bar stock workpieces were compressed on H-13 tool steel platens of varying roughnesses ranging from Ra 0.25 – 6.1 µm (10 – 240 µin). Each platen was machined in such a way …
-
Modeling of Hot Rolling NiTi B2-Cubic with Finite Element Analysis
The objective of this study was to model the hot rolling behavior of austenite (B2-cubic) phase NiTi shape memory alloy with FORGE NxT, a finite element analysis (FEA) software package developed by Transvalor. Isothermal hot compression data was used to fit the Hansel-Spittel constitutive model for …
-
A New Method of Measuring Flow Stress for Improved Modeling of Friction Stir Welding
… Applicability of flow stress data derived from hot compression, hot torsion, and split Hopkinson bar testing methods is assessed. A new method of measuring flow stresses in the stir zone of a friction stir welding tool is developed. This test utilizes a non-consumable flat-faced cylindrical tool …
-
Thermomechanical Processing Of Mg-Li-Al Ultralight Alloys
… are first thermomechanically processed through hot compression tests. Then microstructure, post thermomechanical properties, and hot compression stress-strain curves are studied. The main objective is to correlate the microstructure with the small scale properties and processing parameters (i.e. …
-
Modeling and Simulation of Viscoplasticity, Recrystallization, and Softening of Alloyed Steel During Hot Rolling Process
<p>"Hot rolling is one of the most important and complex deformation processes in steel manufacturing and is essential to final product quality. The objective of this study is to investigate viscoplasticity, dynamic recrystallization, and static softening of alloyed metal during hot rolling …
-
Conventional and Over Molded Sheet Molded Compound (SMC)
… material. The SMC was fabricated using hot compression molding process and overmolded composite was fabricated using a VARTM process with hot compression molding. Epoxy was used as an adhesive to bond the SMC and TCF. Non-destructive testing was performed on a representative panel before …
-
Microstructural development of duplex stainless steels during thermomechanical processing
… methods of such steel, concerning its hot ductility and precipitation behaviour. The microstructural development during serval different TMP procedures was investigated in this thesis. The hot tensile behaviour of as-cast DSS S32750 was investigated in the temperature range of 1000-1200 …
-
An Experimentally Generated Constitutive Model for Peak Stress (σ_peak) in Compression Samples
The hot working behavior of AISI 1018 steel was studied by hot-compression deformation tests on the Gleeble 1500 thermo-mechanical simulator at true strain values of -0.143 and -0.405, true strain rate values of 0.01 and 0.1, and working temperatures of 900°C and 1000°C. The tests show that a lower …
-
Mechanical response of carbon fiber/polyphenylene sulfide commingled fiber & polymethacrylimide foam core sandwich composites
… process of the commingled fibers followed by a hot compression molding process to consolidate the fibers into a composite panel. The panels were then bonded to the PMI foam through the usage of an epoxy resin system from Huntsman through hot compression. Non-destructive testing was performed on …
-
Developing an Accurate Simulation Model for Predicting Friction Stir Welding Processes in 2219 Aluminum Alloy
… most often calibrated using flow stresses from hot compression or hot torsion testing, where strain rates are much lower than those of the FSW process. As such, the current work employed a recently developed method to measure flow stresses in AA 2219-T67 at the high strain rates typical of FSW. …
-
Influence of microstructural features on the hot workability of Ni-based superalloys
… of typical microstructural features on the hot-workability of Ni-based superalloys. Three variants are subjected to carefully selected heat treatments to create comparable starting microstructures for hot compression testing. Their microstructural evolution is revealed via advanced …
-
Characterization and Through Process Modelling of Large Strain Phenomena for Aluminum Alloys at Room and Elevated Temperatures
… and analyze large strain problems (rolling, hot compression) in FCC polycrystals. In the first part of this research, a rate-dependent crystal plasticity based Element Free Galerkin (CPEFG) model was incorporated in commercial software LS-DYNA to simulate cold rolling of AA 5754. Unlike …
-
DIispersion of Cellulose Nanofibers in Biopolymer Based Nanocomposites
… polypropylene (PP) or polyethylene (PE) by hot compression and poly (vinyl alcohol) (PVA) in an aqueous phase by film casting. The mechanical properties of nanofiber reinforced PVA film demonstrated a 4-5 fold increase in tensile strength, as compared to the untreated fiber-blend-PVA film. …
-
Effects of C and B microalloying additions on the microstructure and processability of René 41 Ni-based superalloy
… The first approach is an experimental one using hot compression testings and material characterisations. A second approach using machine learning methodology was also used to provide linkage for the experimental observations with industrial René 41 materials based on ultrasonic defects and …
-
Thermomechanical study of H13 tool steel
H13 is a hot work tool steel used as extrusion and forging dies in metal forming industries. It is characterized by its high thermal stability and wear resistance. For large size tools, H13 alloy bars are generally produced by hot open-die forging of cast ingots. However, the selection of the hot …
-
Controlling microstructure in nickel 200, titanium grade 2, and titanium grade 5 for the calibration of ultrasonic microstructure characterization
… after cold rolling. Heat treatments and hot compression further produced fully lamellar, duplex, and equiaxed (globular) microstructure forms in the TiGr5 material. The theory of ultrasonic signals interacting with grain boundaries and grain/phase interfaces will be discussed in light of …
-
Modeling the Transient Effects during the Hot-Pressing of Wood-Based Composites
… The number of interacting variables during the hot-compression process is prohibitively large to assess a wide variety of data by experimental means. Therefore, the main advantage of the model based approach that the effect of the hot-compression parameters on the final properties of wood-based …
-
DESIGN OF MODEL MAGNESIUM ALLOYS FOR EXTREME DYNAMIC ENVIRONMENTS
… processing routes (using annealing, rolling, hot compression, and equal channel angular extrusion) to strategically tune atomic-scale defects to control nucleation and clustering of solute atoms. Using a combination of experiments and computations, we demonstrate how one can produce a high …
Page 1 of 3