Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 51 for “"hydraulic testing"”.
-
Hydraulic Testing of the Big Hole Fault, Northern San Rafael Swell, Utah
… and Neuman, and Theis, in order to evaluate the hydraulic properties of the fault and its associated damage zone. The tests were not quantitatively interpretable. Response curves were a poor match for Hsieh type curves and failed to give a positive definite hydraulic conductivity tensor. Theis …
-
Innovative Application of FLUTe™ Liners for Cross-Hole Hydraulic Testing in Crystalline Bedrock Aquifers
… liners are used to generate a new style of hydraulic pulse into the aquifer, with pressure response monitored in a nearby network of open boreholes. Preliminary testing reveals the potential for this method to be used in conjunction with other currently employed borehole liner applications …
-
In Situ Hydraulic Testing and Water Quality Sampling in the Hyporheic Zone of the Columbia River, Hanford Reach, Washington
… above federal drinking water standards. Vertical hydraulic gradients ranged from -0.01 to +0.30. Hydraulic conductivity values, estimated using slug tests, ranged from 2.8 x 10–5 cm/s to 4.3 x 10-2 cm/s and were largest in areas with high Cr(VI) concentrations. Specific discharge values were …
-
A study of the effects of rapidly applied loads and repeated loads on countersunk riveted joints
… Industries Association of America values. A hydraulic testing machine designed for these specific tests was constructed and placed in operation. A general discussion of the testing machine and its operation is included.
-
Minimization of Crosstalk in Multi-Actuator Hydraulic Systems
The field of material testing is dominated by servo-hydraulic control systems owing to their large power to weight ratio compared to servo-electric control systems. Hydraulic systems are capable of producing large forces and torques with a fast response time, making them ideal to conduct fatigue, …
-
Investigation of the Effects of Biofouling on the Hydraulic Properties of Wells in Fractured Bedrock Aquifers
… in the spring of 2006 and after preliminary hydraulic testing; biofilm was grown in the well by the addition of nutrients (steel wool, Difco beef peptone and gelatin). The wells located in Portland and Cambridge are more than 10 years old and were already biofouled. In each case, the well was …
-
The effect of cyclic loads on bond
… was designed to enable the use of a standard hydraulic testing machine to apply the tension and compression loads; The strain along the bar and the total deformation of the specimens were continuously recorded. The main factors studied were the effect of the peak stress level, the effect of …
-
Development, Optimization, and Twisted Adjustment of an Axial Flow Blood Pump for Fontan Patients
… impeller prototype was created and evaluated by hydraulic testing. In contrast to the fixed design, the flexible impeller enabled a range of blade angles from 60°-150°. Improvement in pump performance was achieved. Pressure generation was found to decrease as a function of higher flow rates and …
-
Fracture Network Characterization of an Aquitard Surface within the Wonewoc Sandstone using Digital Outcrop Photogrammetry and Discrete Fracture Network (DFN) Modelling
… rock cores, down-hole geophysical logging and hydraulic testing were correlated with fracture measurements from six outcrops to evaluate whether the head loss is caused by poor vertical connectivity between fracture networks in the upper and lower portions of the aquifer. Outcrop observations …
-
Assessing the Hydrogeological Properties Influencing Nitrate Distribution in a Shallow Unconfined Dolostone Aquifer and Supply Well Vulnerability
… of denitrification and flow path distinction. Hydraulic testing on the multilevel system (MLS) required a novel setup and mathematical development to address friction and acceleration losses for unsteady oscillatory annular flow conditions to obtain transmissivity (T) estimates. This study …
-
Hydrogeological Characterization of Contaminated Glacial Sediments in South Central Wisconsin
… are difficult to characterize geologically and hydraulically. In this study, a detailed investigation of the unconsolidated sediment was completed to determine how best to characterize the hydrogeology by integrating multiple independent and high-resolution data sets including: stratigraphic …
-
High-resolution discrete fracture network characterization using inclined coreholes in a Silurian dolostone aquifer in Guelph, Ontario
… including core logging, borehole geophysics, and hydraulic testing were conducted to determine fracture orientation and spacing as well as hydraulic aperture distributions. The results of the orientation analysis demonstrate that the inclined coreholes were more effective at sampling high-angled …
-
Mechanistic service life prediction of rigid pavement joint sealant: a new laboratory testing technique
… A special fixture, attached to a servo-hydraulic testing machine, was designed to transfer applied cyclic shear deflection to a sealant sandwiched between two 51 x 51 x 51 mm portland cement concrete (PCC) cubes at a constant horizontal deflection. The new testing method simulates field …
-
Design Test Rig for Trailer Connections - A Structured Approach to Developing a Customizable Test Rig for Trailer Connector Verification in Heavy Vehicle Production.
… within truck production. However, the current testing equipment is simplistic and lacks reliability especially when testing nonstandard trucks. This can result in potential production delays and quality issues. This thesis conducted in collaboration with Volvo Trucks, aims to address these …
-
Theoretical and field studies of fluid flow in fractured rocks
A comprehensive methodology of hydraulic testing in fractured rocks is presented. The methodology utilizes geological and geophysical information as background. It consists of conventional single-hole packer tests in conjection with a newly developed cross-hole packer test. The cross-hole method …
-
Static and Fatigue Failure Response of Woven Carbon Fiber Specimens with Double Edge Notches
… fatigue tests performed on an Instron 8801 servo-hydraulic testing system. Specimens were constructed of Advanced Composites Group product # LTM45EL woven carbon fiber pre-preg/epoxy and were cut to approximately 9-inch in length and 1-inch in width. Notches were cut into some of the specimens …
-
The value of hydrogeological information in tunnel design in rock Evaluating VOIA to support pre-investigation decisions
… project in Sweden. Uncertainty in hydraulic conductivity within fracture networks presents a major challenge in predicting groundwater inflow. To support design decisions under such uncertainty, this study applies a Value of Information Analysis (VOIA) framework integrated with …
-
Western Snake River Plain, Idaho, Fluvial-Lacustrine Sediments: Exhumation Estimates from Mudstone Compaction, Unconformity Identification by Buried Soil Carbonate, Hydraulic Conductivity Estimates from Well Cuttings
… 7 NE ¼, SW ¼, T. 2 N., R. 3 E.) determined from hydraulic testing are compared to hydraulic conductivity estimates from empirical formulas, and permeameter tests. Constant rate pump test data calculates a transmissivity value of 34,000 g/d/ft2. Hydraulic conductivity values from Terzaghi, Kozeny, …
-
Thermal mehcanical hydraulic experimental tools for molybdenum-99 production target analysis
… results through various thermal, mechanical, and hydraulic testing. Methods included manufacturing target surrogates of different geometries. Heating loads and hydraulic flow-loops simulated the target in a reactor and testing measurements were used to quantify thermal resistance. Post evaluation …
-
Perturbation methods for rapid modeling and inversion of single-phase pressure diffusion measurements
… technique, Rapid Inverse Modeling (RIM) of hydraulic measurements is also approached by efficiently adapting the sensitivity functions to calculate the entries of the associated Jacobian matrix. Research findings confirm the flexibility and reliability of perturbation methods after …
Page 1 of 3