Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 119 for “"ignition delay time"”.
-
Chemiluminescence and Ignition Delay Time Measurements of C9H20 Oxidation in O2-Ar Behind Reflected Shock Waves
… the physical, chemical, combustion, and ignition properties of multi-component petroleum-based fuels, enabling fundamental studies to be performed in a more controlled manner. Of particular interest are straight-chained, saturated hydrocarbons (n-alkanes) due to the high concentration of …
-
Numerical Modeling Of The Shock Tube Flow Fields Before Andduring Ignition Delay Time Experiments At Practical Conditions
… refinement (AMR) algorithm was applied to the time-dependent flow fields to accurately capture and resolve the shock and contact discontinuities as well as the very fine scales associated with the viscous and reactive effects. A conjugate heat transfer model has been incorporated which enhanced …
-
Measurement of ignition delay time of jet fuels in shock tube for the development of the chemical kinetic mechanism
Submission published under a 24 month embargo labeled 'U of I Access', the embargo will last until 2027-12-01
-
Mid-Infrared Laser Absorption Spectroscopy and Ignition Delay Time Measurements of Advanced Renewable Fuels at High Pressure in a Shock Tube
… combustion properties. Measurements include ignition delay times and time-resolved species concentrations, including that of fuel decomposition and formation of intermediate species such as carbon monoxide and ethylene. These measurements are useful for validating and updating chemical …
-
Shock Ignition of N-Heptane With Supplemental Hydrogen
… n-heptane (surrogate for diesel fuel) and air on ignition delay time at prototypic post-compression diesel engine conditions. Ignition delay time data was measured using the reflected shock wave technique at a pressure of 20 bar (representative of part load engine conditions), for three fuel …
-
Autoignition Delay Time Measurements for Natural Gas Fuel Components and their Mixtures
… hydrocarbons in natural gas can severely reduce ignition delay time of methane-based fuels. To increase the database of auto-ignition delay times for methane-based fuel mixtures characteristic of natural gas, experiments to measure auto-ignition delay times have been performed for a variety of …
-
Characterization Of A Hydrogen-based Synthetic Fuel In A Shock Tube
… traces were recorded and used to calculate ignition delay time for a single mixture at equivalence ratios of [phi ]=0.4, 0.7, 1.0, and 2.0 over a range of temperatures from 913-1803 K. The syngas mixture was tested at full concentration as well as with 98% dilution in Argon. The full …
-
Effects of initial diameter and ambient pressure on the ignition and combustion of laser-ignited aluminum agglomerates
… of initial diameter and ambient pressure on the ignition and burning characteristics of aluminum agglomerates. Agglomerates with initial diameters of 535, 835, and 1000 µm were ignited by a CO*sub2; laser pulse in an oxygen/nitrogen (20/80) environment at pressures ranging from 0.1 to 4.3 MPa. …
-
INVESTIGATION OF JP-8 AUTOIGNITION UNDER VITIATED COMBUSTION CONDITIONS
Limited data on jet fuel ignition and oxidation at low-O2, vitiated conditions has hindered the validation of kinetic models for combustion under such conditions. In this study, ignition delay time experiments of JP-8 have been performed with vitiated air at low pressures. Initially, the effects of …
-
Diesel Spray and Premixed Methane-Air Ignition Behind a Reflected Shock Wave
This study investigates single-event ignition of diesel fuel injected into methane-air that is applicable to compression ignition dual fuel engine conditions. Post compression cylinder temperature and pressure conditions were created behind a reflected shock wave in a 76 mm square-channel shock …
-
The Effect of 2,5-Norbornadiene on the Ignition of Hydrogen and Methane Behind Reflected Shock Waves
Ignition delay times were measured for stoichiometric H2/O2, CH4/O2, H2/ C7H8/O2, and CH4/C7H8/O2 mixtures highly diluted in argon using the High-Pressure Shock Tube and Aerospace Shock Tube Facilities at Texas A&M University. Reflected-shock temperatures ranged from 1014 to 1459 K in the hydrogen …
-
Experimental Investigation into Combustion Torch Jet Ignition of Methane-Air, Ethylene-Air, and Propane-Air Mixtures
Ignitability and the ignition delay time of a combustible mixture in a long combustion chamber, ignited by a hot combustion torch jet generated in a pre-chamber was investigated experimentally in relation to application as a viable igniter method for wave rotor combustors. Methane-air, …
-
Experimental shock tube study of ignition promotion for methane under engine relevant conditions
The ignition delay time of methane and various methane-additives mixed homogeneously with air has been measured experimentally using a reflected shock technique for pressures from 16 to 40 atm and temperatures from 950 to HOOK. A non-constant-specific-heat model has been developed for calculating …
-
Ignition Delay Times of Natural Gas/Hydrogen Blends at Elevated Pressures
… For reheat gas turbines, understanding of the ignition delay times of high-hydrogen natural gases is important for two reasons. First, if the ignition delay time is too short, autoignition can occur in the mixer before the primary combustor. Second, the flame in the secondary burner is …
-
An investigation of squish generated turbulence in. I.C. engines
… the additional effect of a reduction in the ignition delay time (spark to 2% mass burned). The squish-jet design resulted in a reduction of the ignition delay time by 3 crank angle degrees and in a 4% increase in peak pressure occurring 3 crank angle degrees earlier compared to the reference …
-
Laser Heating and Ignition of HTPB-Based Solid Fuels in an Oxidizing Environment
… strand burner was used to simulate SFRJ ignition and combustion conditions. Laser heating and ignition experiments were conducted with a representative SFRJ fuel (hydroxyl-terminated polybutadiene, HTPB) in dry air at three different pressure ranges (45 ± 5, 85 ± 5, and 130 ± 5 psia) over …
-
An Experimental Study into the Ignition of Methane and Ethane Blends in a New Shock-tube Facility
… low temperature, high pressure, and long test times was designed and installed at the Turbomachinery Laboratory in December of 2008. The single-pulse shock tube uses either lexan diaphragms or die-scored aluminum disks of up to 4 mm in thickness. The modular design of the tube allows for …
-
A Study Of Syngas Oxidation At High Pressures And Low Temperatures
Ignition and oxidation characteristics of CO/H2, H2/O2 and CO/H2/CH4/CO2/Ar fuel blends in air were studied using both experimental and computer simulation methods. Shock-tube experiments were conducted behind reflected shock waves at intermediate temperatures (825 < T < 1400 K) for a wide range of …
Page 1 of 6