Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 59 for “"ignition time"”.
-
Predicting the Ignition Time and Burning Rate of Thermoplastics in the Cone Calorimeter
Ignition and burning rate data are developed for Nylon 6/6, Polyethylene, and Polypropylene in a Cone Calorimeter heating assembly. The objective is to examine a testing protocol that leads to the prediction of ignition and burning rate for thermoplastics from Cone data. The flame heat flux is not …
-
Statistical Uncertainty of the Ignition Time, Burning Rate, and Extinction Characteristics of Engineered Timber Products
… of flammability parameters such as time to ignition, mass loss rate (MLR), and extinction criteria is critical for understanding ignition and burning behavior of timber products. These parameters, often determined with bench scale experiments, have previously been presented in …
-
Exergy Based SI Engine Model Optimisation. Exergy Based Simulation and Modelling of Bi-fuel SI Engine for Optimisation of Equivalence Ratio and Ignition Time Using Artificial Neural Network (ANN) Emulation and Particle Swarm Optimisation (PSO).
… and evaluated. A four-stroke bi-fuel spark ignition (SI) engine is modelled for optimisation of engine performance based upon exergy analysis. An artificial neural network (ANN) is used as an emulator to speed up the optimisation processes. Constrained particle swarm optimisation (CPSO) is …
-
Ignition and combustion behaviors of nano-composite energetic materials
… behavior of thermites. In this study, the ignition sensitivity of an aluminum molybdenum-trioxide (AI/M0O3) composite mixture was examined. Laser ignition experiments were performed to determine the ignition time and burn rates of newly developed nano-Al mixed with M0O3. The scope of this …
-
Modelling of ignition of liquid hydrocarbon droplets at high pressure.
… work presents a mathematical model for the auto-ignition process of a single droplet of pure liquid hydrocarbon at high pressure. The model solves the full transient equations of continuity, species diffusion and energy in the vapour phase surrounding the droplet using finite difference …
-
Characteristics of hydrogen combustion in a direct injected constant volume combustion chamber using rainbow schlieren deflectometry
… of hydrogen at varying equivalence ratios, ignition timings, and volumetric percentages with other fuels is necessary to optimize engine operations. This study investigates the combustion performance of hydrogen injected into a constant volume combustion chamber (CVCC). The properties …
-
Ignition Testing of U.S. Army Rocket Launch Tubes with Comparative Heat Transfer Analysis
… objective of this research was to determine the time to ignition of U.S. Army fiberglass epoxy rocket tubes in various conditions. Experiments were conducted using an oxygen calorimeter and a propane burner for determining the ignition time. The Biot number and heat transfer coefficient was …
-
Low flux radiative ignition studies of ammonium perchlorate composite propellants
The vast majority of propellant ignition data has been collected and studied for heat fluxes in the typical, intentional ignition range. However, when a propellant contained within a rocket motor case is exposed to low fluxes in hazardous situations, such as close proximity to a fire, unwanted …
-
The Development of a European Fire Classification System for Building Products - Test Methods and Mathematical Modelling
… flashover, can happen fast. Predicting flashover times using product data is therefore important for fire safety. Frequently used are the so-called thermal models that by calculations of the products surface temperature predict ignition time and flame spread rate. Alternatively, the ignition time …
-
Laser Spark Ignition of Counter-flow Diffusion Flames: Effects of diluents and diffusive-thermal properties
… pulsed Nd:YAG laser is used to study laser spark ignition of methane counter-flow diffusion flames with the use of helium and argon as diluents to achieve a wide range of variations in transport properties. The global strain rate and Damkohler number on successful ignition were investigated for …
-
Laser shadowgraph study of early flame propagation in swirling flows near the lean misfire limit.
… ({1\over A}{dA\over dt})$ at 0.5 ms from ignition time for the 2-D and the spherical models at ${r\over R}=0.68$ was within the range 0.63-0.97 and at ${r\over R}=0.55$ was within the range 0.5-0.59. The stretch factor for the ellipsoidal model at ${r\over R}=0.68$ was within the range …
-
Effect of Low Reactivity Fuel on Reaction Wave Growth of Dual-Fuel Stratified Mixtures in a Rapid Compression Machine
… have been studying homogenous charge compression ignition (HCCI) as a combustion strategy to improve the efficiency and emissions of the internal combustion strategy. Although early results were promising, it has been since discovered that HCCI engines only operate to their potential over a narrow …
-
Flammability characteristics of layered fabric assemblies
… of space between layered fabrics on the (a) ignition time, (b) maximum heat transfer rate, (c) time to reach maximum heat transfer rate, and (d) total heat transfer of fabric assemblies. Men's woven dress shirt fabrics and knit undershirt fabrics of cotton, polyester, and cotton/polyester …
-
A nonlinear electrical analog "Black Box" synthesis of a mesquite wood thermal system
… tree top-killing treatment, etc, on the ignition parameters of the mesquite wood. The system, when finally characterized, would be able to predict the temperatures (surface and internal) of a stem of mesquite with respect to time for a given constant thermal environment. The ignition …
-
Performance and combustion characteristics of a diesel-pilot gas injection engine
… has been used to determine the pressure rise (ignition time) delay and combustion duration as well as the characteristic burning pattern. At low load late burning high cyclic variations, and incomplete combustion are associated with peak compression temperature lower than 900 K.
-
Dynamic mesh adaption for supersonic combustion waves modeled with detailed reaction mechanisms
… as implicit upwind finite volume scheme, <br>time scale splitting, adaptive local time stepping, and source term <br>integration methods, to solve stiff systems of ODEs. <br>Thus we obtain the possibility to simulate on a workstation with <br>moderate numerical cost demanding, time-dependent …
-
Auto-Ignition of Liquid n-Paraffin Fuels Mixtures as Single Droplets Using Continuous Thermodynamics
This thesis reports a model to predict the auto-ignition time of single droplets of n-paraffin fuel mixtures using the method of continuous thermodynamics. The model uses experimental data for pure fuels to fit rate parameters for a single-step global chemical reaction equation; from this, …
Page 1 of 3