Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 57 for “"imidization"”.

  1. Study of the imidization of polyamic acid using microdielectrometry

    Opened via license agreement from author. 9/14/2021, JIRA ticket LDC-996

    gatech Repository record for Study of the imidization of polyamic acid using microdielectrometry (opens in a new tab)

  2. Effects of polymerization conditions and imidization methods on performance of crosslinkable polymer membrane for CO₂/CH₄ separation

    … effects due to polymerization conditions and imidization methods on properties of 1,3-propanediol monoesterified crosslinkable polyimide (PDMC). Hillock, Omole, Ward, and Ma did work on PDMC synthesis; however, variability of polymer properties remains a challenge that must be overcome for …

    gatech Repository record for Effects of polymerization conditions and imidization methods on performance of crosslinkable polymer membrane for CO₂/CH₄ separation (opens in a new tab)

  3. Siloxane modified engineering polymers: synthesis and characteristics

    … the imidized homo- and copolymers. The first imidization process, conducted on solution cast poly(amic acid) films, employed stepwise heating cycles to 300°C. Quantitative thermal imidization was also achieved in solution at temperatures in the 140 to 170°C range. This novel method of …

    vt Repository record for Siloxane modified engineering polymers: synthesis and characteristics (opens in a new tab)

  4. Synthesized polyimide membranes for pervaporation separations of toluene/iso-octane mixtures

    … by both chemical and thermal solution imidization. The synthesized polyimides were formed into dense films by solution casting. The physical properties of the polyimides synthesized with monomers: 2, 2-bis (3, 4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA), 4, 6-trimethyl-1, …

    texas Repository record for Synthesized polyimide membranes for pervaporation separations of toluene/iso-octane mixtures (opens in a new tab)

  5. Kinetic and mechanistic investigations of polyimide formation and characterization of their blends with polybenzimidazoles

    … based upon polyimides and polybenzimidazole. Imidization kinetics were successfully followed by the quantitative non-aqueous titration of the amic acid functional groups as a function of reaction conditions. The homogeneous solution imidization processes were described by auto-acid catalyzed …

    vt Repository record for Kinetic and mechanistic investigations of polyimide formation and characterization of their blends with polybenzimidazoles (opens in a new tab)

  6. Synthesis of poly(arylene ether sulfone)-polyimide segmented copolymers

    … copolymers were synthesized using a solution imidization procedure with NMP as the solvent and o-dichlorobenzene as the azeotroping agent. The polysulfone oligomers were reacted into the system via the diamine oligomer. The segmented copolymers demonstrated good solubility characteristics, …

    vt Repository record for Synthesis of poly(arylene ether sulfone)-polyimide segmented copolymers (opens in a new tab)

  7. Structure-property behavior of polyimide homopolymers, copolymers, and blends

    … method involved the utilization of a solution imidization technique in converting the poly(amic acid) intermediate to the fully cyclized polyimide. Another important method was the incorporation of a monofunctional reagents to obtain controlled endgroups and molecular weights. Structural …

    vt Repository record for Structure-property behavior of polyimide homopolymers, copolymers, and blends (opens in a new tab)

  8. Synthesis and characterization of perfectly alternating segmented copolymers comprised of poly(dimethylsiloxane)s and engineering thermoplastics

    … and poly(arylene ether sulfone)) or by solution imidization using a controlled excess of the diamine monomer. A solution imidization method was developed for the segmented copolymerization that simplified the typically two-step, two-solvent method into a one-step approach with a single solvent. …

    vt Repository record for Synthesis and characterization of perfectly alternating segmented copolymers comprised of poly(dimethylsiloxane)s and engineering thermoplastics (opens in a new tab)

  9. Characterization of modified polyimide adhesives

    … copolymers prepared by bulk and solution thermal imidization were investigated as structural adhesives for titanium. The solution thermal imidization procedure was found to result in favorable adhesive characteristics while the presence of siloxane segments in the polymer backbone improved the …

    vt Repository record for Characterization of modified polyimide adhesives (opens in a new tab)

  10. A process simulation model for the manufacture of composite laminates from fiber-reinforced, polyimide matrix prepreg materials

    … through the composite microstructure during the imidization reaction. The volatile formation model can be used to predict the vapor pressure profile and volatile mass flux. The second part of the simulation model, the consolidation model, can be used to determine the degree of crosslinking, resin …

    vt Repository record for A process simulation model for the manufacture of composite laminates from fiber-reinforced, polyimide matrix prepreg materials (opens in a new tab)

  11. Investigation of the heating and curing rate of polymeric materials with thermal energy, continuous and pulsed microwave radiation

    … as the agitation rate was increased, the rate of imidization of poly(amic acids) with microwave radiation approached the rate of thermal imidization, at constant temperature. However, more research is required to clarify this complex phenomenon.

    vt Repository record for Investigation of the heating and curing rate of polymeric materials with thermal energy, continuous and pulsed microwave radiation (opens in a new tab)

  12. Synthesis and Characterization of Novel Polyimide Gas Separation Membrane Material Systems

    … using either the two-step ester-acid solution imidization or the high temperature solution imidization routes. High molecular weight soluble fully cyclized polyimides were successfully synthesized using a 1:1 molar ratio of dianhydride to diamine. The polyimides were film forming and were …

    vt Repository record for Synthesis and Characterization of Novel Polyimide Gas Separation Membrane Material Systems (opens in a new tab)

  13. Polyimide-Containing Molecular Bottlebrushes: Synthesis and Self-Assembly

    … PEO to a PAE brush precursor. Imidization of the PAE core was carried out in DMF at 110 ºC and confirmed using 1H NMR and FTIR. SEC analysis could only be conducted following imidization due to an inability to prepare samples with an unimidized PAE core. Dynamic light scattering …

    buffalo Repository record for Polyimide-Containing Molecular Bottlebrushes: Synthesis and Self-Assembly (opens in a new tab)

  14. Manipulation of Carbon Nanostructures for Multifunctional Composite Materials

    … (PAA) solution at 100 psi followed by thermal imidization to obtain fibers reinforced with polyimide (PI). The tensile strength was increased form 68 to 215 MPa for SWCNT fibers after VPI and imidization. Surfactant-wrapped chemically converted graphene (CCG) sheets obtained from the hydrazine …

    rice Repository record for Manipulation of Carbon Nanostructures for Multifunctional Composite Materials (opens in a new tab)

  15. Novel high performance thermosetting polyimides

    … oligomers were synthesized via solution imidization techniques, using the ester-acid derivatives of various dianhydrides and various aromatic diamines. A "one pot" procedure utilizing NMP as the solvent and o-dichlorobenzene as the azeotroping agent reproducibly exhibit fully imidized …

    vt Repository record for Novel high performance thermosetting polyimides (opens in a new tab)

  16. Imide/Arylene Ether Copolymers

    … either thermally or solution imidized. Thermal imidization was accomplished by heating 1 h each at 100, 200 and 300°C while solution imidization was accomplished by adding toluene to the reaction, heating to 155°C overnight and collecting the toluene/water azeotropic mixture in a Dean-Stark …

    vcu Repository record for Imide/Arylene Ether Copolymers (opens in a new tab)

  17. Structure-property behavior of novel high performance thermoplastic and thermoset structural adhesives and composite matrix resins

    … well-defined phthalimide endgroups via solution imidization. They were characterized by intrinsic viscosity, DSC, TGA, and thermomechanical measurements. Molecular weight control was successful and these polyimides were thermally stable via dynamic TGA up to 500°C. Flame resistance was suggested …

    vt Repository record for Structure-property behavior of novel high performance thermoplastic and thermoset structural adhesives and composite matrix resins (opens in a new tab)

  18. The effect of synthesis route and ortho-position functional group on thermally rearranged polymer thermal and transport properties

    … were synthesized using chemical and thermal imidization, and hydroxyl, acetate, propanoate, or pivalate ortho-position groups were considered. In these polymers, gas permeability increases as a function of conversion for all samples. The polyimide synthesis route does not affect the thermal …

    texas Repository record for The effect of synthesis route and ortho-position functional group on thermally rearranged polymer thermal and transport properties (opens in a new tab)

Page 1 of 3