Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 185 for “"impact loads"”.
-
AUXETIC SANDWICH PANELS FOR PROTECTION AGAINST IMPACT LOADS
… and auxetic cellular cores under low-velocity impacts. 2.5D cellular core topologies are introduced that comprise a conventional non-auxetic honeycomb (HC) core architecture, along with four auxetic designs: re-entrant (RE), double arrow head (DAH), standard chiral (SC), and wavy chiral (WC). …
-
Dynamic response of ship structures to impact loads
… the dynamic response of a ship structure to impact loads is investigated. The ship motion is fully three-dimensional and the ship structure is modeled as a three-dimensional elastic beam. Finite element methods are used to digitize the equations of motion of the system. The forces on the ship …
-
Pavement responses due to aircraft impact loads during hard landings
Master of Science (M.S.)
-
Impact loads on the self-elevating unit during jacking operation
… remain a limiting factor for operation, as impact between the seabed and spudcan may occur due to vessel motion in waves. Limits for these operations are defined by the vessel manufacturer and do generally not account for site-specific parameters, such as soil deformation behaviour and water …
-
PERFORMANCE OF IRON-FOAM CEMENTITIOUS COMPOSITE AGAINST STATIC AND IMPACT LOADS
… protect the main structure from explosions and impact loads. One of the typical protections is multi-layer materials composite structure with the interlayer acting as an energy-absorbing material, for example - metal foam. In order to use metal foam in infrastructure protective systems, this …
-
Progressive damage analysis for aerospace composite structures subjected to impact loads
L'abstract è presente nell'allegato / the abstract is in the attachment
-
Response of structures to impact loads, using elastic and plastic analysis
… work is to study the response of structures to impact loads. Depending on the magnitude of impact the structural response may need elastic or plastic analysis. When the deformations are within the elastic region, normal mode analysis is used to find the response. Structures considered in this …
-
Experimental Investigation of Ultra-High-Performance Concrete Panels Under Tornado Impact Loads
… the performance of thin UHPC panels subjected to impact of standard wood 2x4 projectiles, following the requirements of ICC/NSSA 500, the leading standard on storm shelter design. 1.25-inch-thick and 1.625-inch-thick UHPC panels were cast and impacted with 15-lb wood projectiles at speeds ranging …
-
Experimental and Numerical Investigation of Impact Loads on a Group of Piles
… as roadside safety devices resisting against impact loading. The effectiveness of in-line groups of piles to safely redirect or stop the approaching vehicles, however, has not been well investigated from the geotechnical point of view. The seriousness of the failure of such systems requires …
-
Field Measurements for Estimating Impact Loads on Girder Supports for Ferry Ramps
… was used to develop recommendations for design loads to be used when the bearing assemblies are rebuilt. Results indicate that the exterior beams of the ramps experience the largest force values in compression caused by docking and thrusting of the ferry boats. The interior beams experience …
-
Wheel-rail impact loads generated by wheel flats - Detector measurements and simulations
… trains. This thesis aims to predict wheel-rail impact loads caused by wheel flats, and how variables such as the flat length, axle load, train speed, time since its formation, and unsprung mass influence the load. The thesis is divided into two main parts: (1) an analysis of measured data from …
-
Response and Failure of Adhesively Bonded Automotive Composite Structures under Impact Loads
… experimental technique for conducting low speed impact of adhesively bonded automotive composite joints is presented. Based on the use of a modified drop tower, mode I, II, and mixed mode values for critical energy release rate were determined for a composite/epoxy system and used to create a …
-
Characterization of stresses induced in doweled joints due to thermal and impact loads
… due to the application of mechanical and thermal loads has not been previously characterized. In this study a detailed Three-Dimensional Finite Element (3D FE) model was used to investigate the state of contact stresses, mid slab stresses, and load transfer efficiency that develop in dowel jointed …
-
Method for the determination of stresses around an opening under impact loads, A
Includes bibliographical references.
-
Behaviour of ultra high performance fibre reinforced concrete subjected to static and impact loads
… disasters, usually associated with dynamic loads from earthquakes and explosion loads, can cause large scale catastrophic failures. These events produce non-uniform forces in structures which lead in failure mechanisms resulting in progressive collapse. The increasing requirements for …
-
Dynamic Response, Assessment, and Retrofitting of Prestressed Concrete Bridge Girders Subjected to Lateral Impact Loads
… (PC) bridge girders subjected to lateral impact loading. The research comprised two main phases: (1) numerical modeling and (2) experimental testing. A validated 3D nonlinear finite element (FE) model was developed to conduct parametric studies on impact behavior, dynamic response, and …
-
A study of the hydrodynamic impact loads on a dihedral hydrofoil suitable for seaplane use
An analysis of the use of planing data to predict impact loads of a dihedral hydrofoil suitable for seaplane installation is presented and compared with experimental model tests. The experimental data verifies the theory very well for the prediction of maximum loads. No empirical correction factors …
-
Neural Network Prediction of Ultimate Compression After Impact Loads in Graphite-Epoxy Coupons from Ultrasonic C-Scan Images
… network could predict the ultimate compressive loads of impact damaged 24-ply graphite-epoxy coupons from ultrasonic C-scan images. The 24-ply graphite-epoxy coupons were manufactured with bidirectional preimpregnated tape and cut into 21 coupons, 4 inches by 6 inches each. The coupons were …
Page 1 of 10