Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 61 for “"impedance response"”.
-
Modelling the impedance response of Perovskite solar cells
… description of their fundamental workings. Impedance spectroscopy (IS) is a simple and powerful technique that can be used to probe the fundamental properties and behaviour of PSCs both in situ and in the lab. As such, it can be used to asses changes in device behaviour associated with …
-
Impedance Response of Alumina-silicon Carbide Whisker Composites
The impedance response of silicon carbide whisker-alumina composites is investigated utilizing novel stereological techniques along with a microstructural simulation. The stereological techniques developed allow for a measurement of the trivariate length, radius and orientation distribution of …
-
Analysis of Electrode Geometric Parameters on AC Impedance Response
Electrochemical Impedance Spectroscopy (EIS) is a powerful and proven tool for analyzing AC impedance response. A conventional three electrode EIS method was used to perform the investigation in the present study. Saturated potassium chloride solution was used as the electrolyte, and three …
-
Analysis of Impedance Response in Lithium-ion Battery Electrodes
… electrical conductivity and the electrochemical impedance. The technique of digital stochastic modeling has been employed for the generation of electrode microstructures consisting of active material, binder, conductive additive and electrolyte. Physicochemical properties for each of the …
-
Impedance characterization of porous carbon electrodes with controlled pore size distribution : experimental verification
In this work, electrochemical impedance spectroscopy (EIS) measurements were carried out on an increasingly complex distribution of cylindrical pores with well-defined geometries. The desired pores were made via drilling on graphite surfaces. The pore structure complexity was gradually increased …
-
Electrical characterization of phytoplankton suspensions using impedance spectroscopy.
… suspended in a stagnant medium and measured the impedance response using a lab-on-chip and impedance analyzer. The individual cell characteristics were derived from the impedance response of the group. The goal was to characterize and differentiate between algae species, as well as healthy and …
-
Electroding Methods for in situ Reverse Osmosis Sensors
… interfacial regions, thus sensor impedance. Platinized polymer graft sensors were shown to be sensitive to protein fouling. Electrodes were characterized by their electrical properties, SEM and XPS. Assembled sensors were evaluated for sensitivity to electrolyte concentration and …
-
Addressing Electrode Degradation and Microstructure Effect in Energy Storage
… from the cell performance and electrochemical impedance spectroscopy (EIS). In the study of lithium-ion batteries, the proposed model successfully captures the influence of active particle morphology on the SEI formation and corresponding impedance characteristics. Different electrode …
-
Thermo-mechanical Behavior of Lithium-ion Battery Electrodes
… equivalent-circuit model is used to predict the impedance response of electrode particles. The fracture generation increases as the temperature decreases. However, the diffusion induced fracture is found to be proportional to the current density and particle sizes. Simulations under realistic …
-
Investigation of surface films in lithium-ion batteries
… to determine that surface films do not alter the impedance response of the cell after calendar aging.
-
Impedance Analysis of Anodized Aluminum and Structural Bridge Tendons
… investigation technique being electrochemical impedance spectroscopy (EIS). In the first part, EIS is used to estimate the layer thickness of anodized aluminum oxide. This required the development of an appropriate electrical circuit model; that with parameters that correspond to physical …
-
Electrochemical impedance spectroscopy of proton exchange membrane fuel cell stacks
Electrochemical Impedance Spectroscopy (EIS) is applied to a small, four cell Proton Exchange Membrane (PEM) fuel cell stack to examine the stack response as the load current changes. The measured stack response is compared to a simulated response generated by a stack model that has been developed …
-
Palladium Doped Nano Porous Silicon to Enhance Hydrogen Sensing
A mass manufacturable impedance based, palladium doped porous silicon sensor, was fabricated for hydrogen detection. The sensor was built using electrochemical etching to produce mesoporous silicon. Four nanometers of palladium was defused directly into the porous silicon and another four …
-
Exploration of the Effects of Electrode Shape on the Performance of an Electrochemical Biosensor
… to be performed on-the-spot. Electrochemical impedance biosensor is a promising candidate for creating portable and low-cost devices due to its simplistic signal transduction mechanism. Improving the sensitivity of impedance biosensors is important in achieving the detection limit required for …
-
Modeling and characterization of ionic polymer transducers for sensing and actuation
… work in this area has focused on the actuation response, therefore the focus of this research is on providing a better understanding of the sensing and impedance responses of the ionic polymer transducer. Using transport theory as the basis, a set of analytical models are developed to …
-
Evaporation of Binary Mixtures and Precision Measurement by Crystal Resonator
… can be simultaneously measured by the impedance response of the shear and longitudinal waves emitted from the resonator. The result on the binary mixture presents a simplified model system for further investigations of complicated evaporation kinetics involving complex fluids or …
-
Wireless corrosion sensors for reinforced concrete structures
… Corrosion is detected by measuring the impedance response of the sensor. An automated signal processing routine can be used to evaluate the measured response and detect if a threshold amount of corrosion has occurred
-
Development of a Non-Faradaic Impedimetric Biosensor Based on Reduced Graphene Oxide for the Detection of Brain-Derived Neurotrophic Factor (BDNF)
… and sensor performance. Electrochemical impedance spectroscopy (EIS) was used to monitor changes in impedance associated with BDNF binding events, providing a cost-effective alternative to conventional ELISA assays. The developed biosensor successfully detected BDNF, exhibiting a higher …
-
Impedance spectroscopy of cells after treatment with pulsed electric fields
… of cells which can be observed by real-time impedance measurements. This allows to study the proliferation by an electrical method, without the need for marker molecules. This study demonstrates that the cellular mitogenic activity is closely related to intracellular Ca2+concentration …
-
Investigation of synthetic methods for preparation of 2<sup>o</sup>-amino derivatives of 5-amino- 1, 10-phenanthroline: Applications to Cu<sup>+2</sup> based impedance sensors
… interdigitated electrode array chips in standard impedance and impedance resonance-based Cu2+ sensors. Potential applications include monitoring Cu2+ leaching from anti-fouling coatings on ship hulls. The importance of the planned secondary alkyl amino derivatives will be to test their binding …
Page 1 of 4