Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 841 for “"impinging"”.
-
Extreme wave impinging and overtopping
… the velocity fields of a plunging breaking wave impinging on a structure through measurements in a two-dimensional wave tank. As the wave breaks and overtops the structure, so-called green water is generated. The flow becomes multi-phased and chaotic as a highly aerated region is formed in the …
-
Impinging jet flows for micro-cooling
… of confined circular multiple air jets normally impinging on a flat heated surface is reported. The parametric effects of the jet exit Reynolds numbers, jet-to-target spacing and jet-to-jet spacing on the local and average heat transfer coefficient on five jets in equilaterally staggered arrays …
-
Ablation and ignition by impinging jet flows
… heat transfer problems that involve jet flows impinging on a reacting target are studied through modeling and experimentation. The first system is an ablating carbon-carbon specimen exposed to high heat fluxes from an oxy-acetylene torch which has applications in atmospheric re-entry vehicles. …
-
Fundamental Characteristics of Turbulent Opposed Impinging Jets
… study of two turbulent directly opposed impinging jets in a stagnant ambient fluid, unconfined or uninfluenced by walls is presented. By experimental investigation and numerical modeling, the main characteristics of direct impingement of two turbulent axisymmetric round jets under seven …
-
Study of Steady and Pulsating Impinging Jets
… on the fluid mechanics of steady and pulsed impinging jets is presented in this thesis. An experimental facility was custom-builtin order to generate axisymmetric and incompressible impinging jets (pulsed and steady). In order to ensure that the velocity profiles at the exit were fully …
-
Swept Impinging Oblique Shock Boundary Layer Interactions
… on understanding the underlying physics of swept impinging oblique shock boundary layer interactions (SBLIs) induced by shock generators with varying sweep angles ($\psi$). Experiments were conducted at the University of Arizona's In-draft Supersonic Wind Tunnel (ISWT) operating at Mach 2.28, with …
-
Experimental Investigation of a Normally Impinging Planar Jet
Impinging jets are commonly employed in engineering applications, such as cooling and drying processes, requiring relatively high local transport properties. Flow development of a planar impinging jet and the effect of varying jet parameters are investigated experimentally in a jet facility that is …
-
Experimental investigation of submerged, incompressible, turbulent, impinging jets
… concerning various flow parameters of jets impinging on a smooth lucite plate and a heated metal plate have been carried out. In particular, it is shown that the potential core length of a jet is a function of the Reynolds number and of the jet diameter. It has also been demonstrated that …
-
Heat Transfer Enhancement with Multi-Internal Impinging Jets
… in two-dimensions the use of multi-internal impinging jets as one of the heat transfer enhancement tools. A numerical model using the lattice Boltzmann method is developed to study the effect of different parameters on the fluid flow structure and the rate of heat transfer from a hot plate …
-
Thermal Transport to Impinging Droplets on Superhydrophobic Surfaces
… to quantify the heat transfer to droplets impinging on heated superhydrophobic (SH) surfaces. Integral analysis is used to incorporate an apparent temperature jump at the superhydrophobic surface as a boundary condition. This Thesis considers the scenario of both isotropic and anisotropic …
-
Two-Phase Simulation of Nanofluid in Impinging Jet
… of water-Al2O3 nanofluid in a single and multi-impinging confined jets as one of the heat transfer enhancement methods. Numerical models using Finite Volume method (FVM) are applied to study the effect of different parameters on the flow and heat transfer characteristics. These parameters are …
-
Polymer-induced turbulence modifications in an impinging jet
… turbulence characteristics in a submersed liquid impinging-jet configuration. Turbulent impinging jets are commonly used in technological applications such as drying, scouring, cooling or heating due to an enhancement in transport characteristics in the impingement region under certain …
-
Self-Excited Oscillations of the Impinging Planar Jet
… the geometry of a high-speed subsonic planar jet impinging orthogonally on a large, rigid plate at some distance downstream. This geometry has been found to be liable to the production of intense narrowband acoustic tones produced by self-excited flow oscillations for a range of impingement ratio, …
-
Numerical study of an impinging jet with embedded vortices
Large-eddy simulations of round forced impinging jets at laboratory scale are performed, as a simplified model of the helicopter rotor wake; the goals were to understand the dynamics of the vortices, and to help develop engineering correlation and models. First, I studied the flow over smooth …
-
Simulations of Impinging Jet with a Range of Configuration
Impinging jet technique is widely increasing across the globe due to its ability to produce high heat and mass transfer as compared to other traditional methods. Three cases of impinging jets related to cooling technologies for a gas turbine were investigated. The first case involves a single jet …
-
Axisymmetric air jet impinging on a hemispherical convex plate
… study was carried out on an axisymmetric air jet impinging normally on a smooth, hemispherical convex plate. Three different nozzles of diameters 0.5in.(12.7mm), 0.375in.(9.525mm) and 0.25in.(6.35mm) were used and the nozzle exit Reynolds number varied from 14,000 to 80000.</p><p>The impingement …
-
Axisymmetric air jet impinging on a convex hemispherical plate
… conducted on an axisymmetric, submerged air jet impinging normally on a smooth convex hemisphere. Three nozzle diameters of 0.5" (12.7mm), 0.375" (9.525mm) and 0.25" (6.35mm) were used and tests were run at Reynolds number range of 14,700 to 84,000. The results obtained in the free jet and …
-
Axisymmetric air jet impinging on a hemispherical concave plate
… study was conducted on an axisymmetric air jet impinging normally on a smooth, hemispherical, concave plate. The jet Reynolds numbers, based on bulk nozzle velocity and nozzle exit air properties, were between 14,000 and 75,000. The impingement plate used in this work was a hemispherical surface …
-
Thermal Atomization of Impinging Drops on Superheated Superhydrophobic Surfaces
… analytical models for drop contact area of impinging drops are combined to predict drop spread for all impact scenarios. An analytical model for heat flux is used to find heat transfer to impinging drops and mass flow rate of vapor generated from boiling.
Page 1 of 43