Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"impurity diffusion"”.

  1. Interdiffusion And Impurity Diffusion In Magnesium Solid Solutions

    … strengthening and precipitation hardening. Diffusion plays a key role in the kinetics of and microstructural development during solidification and heat treatment. However, there is limited diffusion data available for Mg and Mg alloys. In particular, because Al is monoisotopic, tracer …

    ucf Repository record for Interdiffusion And Impurity Diffusion In Magnesium Solid Solutions (opens in a new tab)

  2. Effects of time on impurity diffusion and concentration-dependent interdiffusion coefficients in Cu-Ni system

    … has been directed toward investigating the interdiffusion coefficients in binary systems, primarily due to their pivotal role in metallurgical processes and material performance assessments. An essential parameter in this context is the isothermal concentration-dependent interdiffusion …

    manitoba Repository record for Effects of time on impurity diffusion and concentration-dependent interdiffusion coefficients in Cu-Ni system (opens in a new tab)

  3. Atom diffusion and impurity-induced layer disordering in quantum well III-V semiconductor heterostructures

    The process of impurity-induced layer disordering (IILD), or layer intermixing, in Al$\sb{\rm x}$Ga$\sb{\rm 1-x}$As-GaAs quantum-well heterostructures (QWHs) and superlattices (SLs), and in related III-V quantum well heterostructures, has developed extensively. A large variety of experimental data …

    uiuc Repository record for Atom diffusion and impurity-induced layer disordering in quantum well III-V semiconductor heterostructures (opens in a new tab)

  4. Impurity And Interdiffusion In The Magnesium-aluminum System

    … for higher efficiency. Understanding fundamental diffusion behavior in Mg alloys elicits better materials properties through the optimization of processing techniques and heat treatments, whose material responses are affected by diffusion. The main objective of this study is to provide a clear, …

    ucf Repository record for Impurity And Interdiffusion In The Magnesium-aluminum System (opens in a new tab)

  5. Studies of the defects in single crystals of sodium chloride

    … of NaCl have been used to investigate the impurity-cation vacancy association in these crystals. The measurements were made over the temperature range 150° - 650°C on crystals of NaCl doped with Mg 2+, Mn 2+, Ca 2+, Sr 2+, Pb 2+ and Ba 2+ impurity ions. Pour regions of ionic conductance …

    kent Download PDF for Studies of the defects in single crystals of sodium chloride (opens in a new tab)

  6. Molybdenum Nitride Films in the Back Contact Structure of Flexible Substrate CdTe Solar Cells

    … metallic substrates. For this type of devices, impurity diffusion out of stainless-steel substrates due to high temperature processing can be a cause for poor cell performance. It is necessary to investigate ways of improving the back contact by trying to mitigate the above factors. In this …

    usf Repository record for Molybdenum Nitride Films in the Back Contact Structure of Flexible Substrate CdTe Solar Cells (opens in a new tab)

  7. The Influence of Alloying Additions on Diffusion and Strengthening of Magnesium

    … approach must be taken where thermodynamics and diffusion kinetic parameters form the basis of alloy design, process development, and properties-driven applications. The objective of this research effort is twofold: first, to codify the relationship between diffusion behavior, crystal structure, …

    ucf Repository record for The Influence of Alloying Additions on Diffusion and Strengthening of Magnesium (opens in a new tab)

  8. Experimental Study Of Profiles Of Implanted Species Into Semiconductor Materials Using Secondary Ion Mass Spectrometry

    The study of impurity diffusion in semiconductor hosts is an important field that has both fundamental appeal and practical applications. Ion implantation is a good technique to introduce impurities deep into the semiconductor substrates at relatively low temperature and is not limited by the …

    ucf Repository record for Experimental Study Of Profiles Of Implanted Species Into Semiconductor Materials Using Secondary Ion Mass Spectrometry (opens in a new tab)

  9. Ab Initio Modeling of Thermal Barrier Coatings: Effects of Dopants and Impurities on Interface Adhesion, Diffusion and Grain Boundary Strength

    … of a number of studies on interface adhesion, impurity diffusion, grain boundary sliding and cleavage processes and their impact on the mechanical behaviour of grain boundaries. The effects of additives and impurity on interface adhesion were elaborated by using total energy calculations, …

    ottawa-retro Repository record for Ab Initio Modeling of Thermal Barrier Coatings: Effects of Dopants and Impurities on Interface Adhesion, Diffusion and Grain Boundary Strength (opens in a new tab)

  10. Low temperature epitaxial silicon growth using electron cyclotron resonance plasma deposition

    … of 1000° C. At these temperatures autodoping and impurity redistribution limit the feature size achievable in VLSI fabrication. As the typical feature sizes move into the submicron region, new processes for epitaxial silicon deposition will be needed. Another application for a low temperature …

    iastate Repository record for Low temperature epitaxial silicon growth using electron cyclotron resonance plasma deposition (opens in a new tab)

  11. CdTe/CdS Thin Film Solar Cells Fabricated on Flexible Substrates

    … and the deposited films, and also due to impurity diffusion from the foil into the film stack. In order to overcome this problem diffusion barriers where used to eliminate contamination. Silicon dioxide (SiO2), silicon nitride (Si3N4) and molybdenum nitride (MoxNy) were used as such …

    usf Repository record for CdTe/CdS Thin Film Solar Cells Fabricated on Flexible Substrates (opens in a new tab)

  12. High-power single-mode vertical-cavity surface-emitting lasers via impurity induced disordering

    Design principles of impurity-induced disordered (IID) vertical-cavity surface-emitting lasers (VCSELs) are presented, including the influence of IID on electrical, optical, and mode-control properties. A transfer matrix method (TMM) is developed to account for the diffusion of Group III atoms of …

    uiuc Repository record for High-power single-mode vertical-cavity surface-emitting lasers via impurity induced disordering (opens in a new tab)

  13. Depth-resolved studies of SRF materials using high parallel-field beta-NMR spectrometer

    … treatment recipes using heat treatment and/or impurity diffusion have been developed which demonstrate enhanced performance of SRF cavities. Complete understanding of the underlying mechanism of this enhancement, however, requires a controlled study of the near surface. Depth-resolved …

    ubc Repository record for Depth-resolved studies of SRF materials using high parallel-field beta-NMR spectrometer (opens in a new tab) Download PDF for Depth-resolved studies of SRF materials using high parallel-field beta-NMR spectrometer (opens in a new tab)

  14. Phase transformations and chemical interactions in materials exposed to high temperatures

    … microscopy based techniques to understand impurity diffusion from the cladding to the core, as well as to study the crystalline quality of the Ge core. The second application involves solid oxide membrane (SOM) based electrolytic production of silicon, where the interaction between the …

    bu Repository record for Phase transformations and chemical interactions in materials exposed to high temperatures (opens in a new tab)

  15. Multiscale Modeling of Defect Generation and Diffusion in Semiconductor Materials

    … order to gain a fundamental understanding of the diffusion processes that occur during device fabrication, we have developed a kinetic lattice Monte Carlo (KLMC) simulator capable of simulating the self-/inter-/impurity diffusion processes. The findings demonstrate the great potential of KLMC in …

    washington Repository record for Multiscale Modeling of Defect Generation and Diffusion in Semiconductor Materials (opens in a new tab)

  16. DC, MICROWAVE, AND NOISE PROPERTIES OF GAN BASED HETEROJUNCTION FIELD EFFECT TRANSISTORS AND THEIR RELIABILITY ISSUES

    … include hot-electron-induced trap generation, impurity diffusion, surface oxidation, and hot-electron/phonon effects. To investigate the degradation mechanism and its impact on DC, microwave, and noise performance, comprehensive stress experiments were conducted in both un-passivated and …

    vcu Repository record for DC, MICROWAVE, AND NOISE PROPERTIES OF GAN BASED HETEROJUNCTION FIELD EFFECT TRANSISTORS AND THEIR RELIABILITY ISSUES (opens in a new tab)

  17. Study of stress in microelectronic materials by photoelasticity

    … study the stress induced during the typical impurity diffusion processes for manufacturing power diodes, and analyze the stress induced in the thin film/substrate structures. We also develop some models to explain the measurement results and provide theoretical discussions of the results.

    njit Repository record for Study of stress in microelectronic materials by photoelasticity (opens in a new tab)

  18. Processing and reliability studies on hafnium oxide and hafnium silicate for the advanced gate dielectric application

    … serious challenges such as high leakage current, impurity diffusion, and dielectric thickness uniformity control across a 300 mm wafer. Consequently, high-k materials, which have higher dielectric constants (k) than SiO2, are expected to replace it as the gate insulator. Amongst all the materials …

    texas Repository record for Processing and reliability studies on hafnium oxide and hafnium silicate for the advanced gate dielectric application (opens in a new tab)

  19. Impact of Defects and Impurities on Charge Transport and Optical Transitions in Hexagonal Boron Nitride

    … charge transport in h-BN epilayers by analyzing impurity related optical emissions under an applied electric field. The results demonstrate that oxygen impurities significantly influence charge collection efficiency, introducing an additional emission peak at 3.75 eV due to donor acceptor pair …

    ttu Repository record for Impact of Defects and Impurities on Charge Transport and Optical Transitions in Hexagonal Boron Nitride (opens in a new tab)

  20. Process optimization and purity enhancement of germanium to grow HPGe single crystals towards high-sensitive radiation detectors

    … conversion while minimizing oxygen residues and impurity incorporation. The optimized process enabled successful scale-up from 1.7 kg to 3.5 kg GeO2 charges, achieving a 4N pure Ge metallic bar with a yield of over 99 % with negligible contamination. Subsequently, a three-stage zone-refining (ZR) …

    lmu-germany Repository record for Process optimization and purity enhancement of germanium to grow HPGe single crystals towards high-sensitive radiation detectors (opens in a new tab)