Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 2956 for “"in-plane"”.
-
Radial dislocations in plane stress.
The elastic dislocation theory was used to obtain stress potentials for the dual dislocation problem. These solutions give the stress field for an infinite plane region containing a centrally located circular hole with two radial dislocations originating from opposite sides of the hole and …
-
Electrostatic Bifurcation In-Plane Sensors
… piezoelectric, electromagnet, etc.) in many applications. The nonlinearity encountered in electrostatic MEMS is frequently considered a disadvantage. But it can also become a huge advantage when put to intelligent use, such as the case with bifurcation detection mechanisms. In this …
-
In-Plane Fracture of Paper
The in-plane failure of paper is studied in this work by means of a cohesive crack model from experimental as well as theoretical perspectives. Localized damage at in-plane tension of short paper strips is studied for low strain rates. It is observed that under uniaxial in-plane tensile tests, the …
-
Changes in plane geometry textbooks
Thesis (Ed. M.)--Boston University, 1940
-
Optimization of in-plane directional microphone
This report is aimed at optimization of the in-plane directional microphone. In chapter 1, a piezoelectric network model is presented. Then the network model is applied to a piezoelectric cantilever beam. Theoretical results are compared with simulation results to prove the network model. This …
-
Monolithic In-Plane Tunable Optical Filter
… System (MEMS) monolithic in-plane tunable optical filter in both Indium Phosphide and Silicon. By placing one mirror of a waveguide-based Fabry-Perot interferometer on an electrostatically-actuated beam, a tunable filter is constructed. This is the first demonstration of a …
-
Singular Shock Intersections in Plane Flow
Made available in DSpace on 2014-12-05T21:50:18Z (GMT). No. of bitstreams: 1 6003920.pdf: 2927835 bytes, checksum: a6a3726a05b8214a5f056002f0db42b8 (MD5) Previous issue date: 1960
-
Micromachined in-plane acoustic pressure gradient sensors
This work presents the fabrication, modeling, and characterization of two first-generation acoustic in-plane pressure gradient sensors. The first is a micromachined piezoelectric microphone. The microphone structure consists of a semi-rigid beam structure that rotates about torsional pivots in …
-
In-Plane Shear Investigation on Masonry Walls
… 200 shear walls of various masonry types, reinforcement, and grouting scenarios to determine the trends of various wall parameters to strength. The database is assembled from that belonging to researchers over the last 30 years.</p> <p>Strut-and-tie methods from current concrete codes are …
-
Applications of Vector Analysis in Plane Geometry
… to show various applications of vector analysis in plane geometry. Possibilities of such applications have been indicated and some examples worked out by Gibbs-Wilson and others, chiefly as illustrations of vector methods. These illustrations are varied and show the beauty and simplicity of …
-
Development of In-Plane Compliant Bistable Microrelays
… weight, power consumption, and cost of products in which they are used. This research outlines the current state of microrelays, presents three new compliant bistable micromechanisms, and characterizes their performance as microrelays. The characterization includes a treatment of a new …
-
In-plane Seismic Design of Concrete Masonry Structures
The research presented in this thesis consists of two parts. The first part involved the investigation of concrete masonry shear strength and the second part reports an investigation of the lateral strength of partially grout-filled nominally reinforced perforated concrete masonry walls. Valuable …
-
In-plane stiffness of cross-laminated timber floors
This study investigates the in-plane stiffness of CLT floor diaphragms and addresses the lateral load distribution within buildings containing CLT floors. In practice, it is common to assume the floor diaphragm as either flexible or rigid, and distribute the lateral load according to simple hand …
-
In-plane stress analysis using tensor field photoelasticity
Few experimental methods exist for evaluating all in-plane stress components in solid materials; because of the tensor nature of these quantities. Full field measurement of all three stress components is desirable, since plastic deformation or failure can result from any combination of the three. A …
-
In-plane adhesively bonded joints in sandwich structures
… is concerned with the mechanical behaviour of in-plane joints in sandwich structures under static flexural loads. The impetus behind research into these joints stems from the growing development in modular construction techniques that offer competitive global access to higher technology …
Page 1 of 148