Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 7 of 7 for “"inelastic rotation"”.
-
Evaluation of the Inelastic Rotation Capability of Flush End-Plate Moment Connections
… investigation was conducted to study the inelastic rotation capability of flush end-plate moment connections. Seven specimens representing two-bolt and four-bolt flush end-plate configurations were tested under cyclic loading. "Quasi-static" or "slow-cyclic" loading histories suggested by …
-
Development of revised stiffener spacing requirements for seismic links in eccentrically braced frames
… (EBFs). Trans-verse web stiffeners enhance the rotation capacity and the link's ability to dissipate energy due to seismic excitation.The current seismic design standards require the use of transverse stiffeners for EBF links of short and intermediate length. The maximum permitted distances in …
-
Evaluation of Extended End-Plate Moment Connections Under Seismic Loading
… and finite element model results. The inelastic rotation of connections was calculated and conclusions were drawn on the compliance of these connections with current AISC specifications.
-
Development of the Design of Eccentrically Braced Frames with Replaceable Shear Links
… to sustain significant damage through repeated inelastic deformations under design level earthquakes, and thus the structure may require extensive repair or need to be replaced. These drawbacks can be mitigated by designing EBFs with replaceable shear links. Two different replaceable link types …
-
Seismic demand in high-rise concrete walls
… the behaviour of concrete walls concerning the inelastic rotational demand, the results of the dynamic analysis at the time of maximum base rotation and maximum displacement were studied. The results indicate that, due to the influence of higher modes and the "pull-back" of the coupling beams, …
-
The Effects of Steel Fibers on the Plastic Rotation Capacity and Properties of Reinforced Concrete Continuous Beams
… steel has the ability to take a great deal of inelastic rotation at the so-called "plastic-hinges" where the highest moment is applied. This occurs because of the strain-hardening effect of steel that takes place long after the yield strength of steel is reached. There is a very important …
-
Semi-rigid joints for moment-resisting steel framed seismic-resisting systems
… cyclic extension and compression under inelastic rotation demand Sliding Hinge Joint (SHJ), where the beam is pinned to the column at the top flange level and is connected at the bottom flange and the bottom of the web by a unique asymmetrical sliding shear detail The RSJ, FBJ and SHJ …