Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"infill pattern"”.
-
Binder Infill Pattern Design Strategies for Increased Mechanical Properties in Binder Jet Additive Manufacturing Parts
… green and sintered properties through binder pattern manipulation (i.e., toolpathing) and (ii) gain an understanding of their corresponding process-structure-property relationships. Specifically, the author explores three distinct strategies for binder jetted 316L: (1) architected lattice …
-
THERMOPLASTIC ADDITIVE MANUFACTURING FOR COMPOSITES AND MOLDS
… In this study, three male molds with different infill patterns were produced via the EDF-AM process. These include (a) 0°: infill pattern along the printing direction; (b) 90°: infill pattern perpendicular to the printing direction; (c) 0°/90°: alternate layers along and perpendicular …
-
Assessment of advanced additively manufactured composites for structural applications
… properties. The layer height, line width and infill pattern were explored specifically and were identified major impacts on the quality and mechanical behaviour of the printed parts. Specifically decreasing the layer height led to a reduction in porosity and an improvement in mechanical …
-
Additive Manufacturing of Variable Contrast Computed Tomography Anatomical Phantoms Using a Single Feedstock in Fused Filament Fabrication
… deposited filament structure using a rectilinear infill pattern with alternating solid layers. In addition, a method is demonstrated to produce a lumbar spine phantom with the infill modified to accurately mimic the CT contrast for the trabecular and cortical bone volumes of the model.
-
Optimization of orocessing parameters for 3D printed product using Taguchi method and desirability function analysis
… conducted for the FDM variable parameters of the infill pattern, infill density, layer height, printing speed, printing temperature, and wall thickness. Design of the experiment approach is used to determine the best combination of the chosen parameters. A L18 orthogonal design method is employed …
-
EFFECTS OF 3D PRINTING PROCESSING PARAMETERS ON MECHANICAL PROPERTIES OF POLYMERIC MATERIALS
… of basic parameters such as build direction, infill pattern (±45-degree lines, longitudinal lines, transverse lines, concentric lines), and printed layer height (0.2 mm, 0.16 mm, 0.1 mm) were explored on several types of polymers, to include PLA, PETG, and polycarbonate. Tensile testing was …
-
Developing a Material Property Library for Fused Deposition Modeling 3D printed parts to Support the Design of Assistive Technology
… strong influence of printing parameters, such as infill pattern and density. These inconsistencies make it difficult to use finite element analysis (FEA) tools effectively. In most CAD environments, simulations rely on idealized or bulk material properties that don’t represent the actual printed …
-
Design and Analysis Methods for 3D Printed Concrete Structures
… width, bed-joint reinforcement spacing, and infill pattern in 3DPC shear walls was investigated using the proposed modeling strategy. The comparison indicated that the proposed modeling strategy based on shell elements can capture the lateral strength and failure mechanisms of the 3DPC shear …
-
Development of a composite combat helmet using structural metamaterials
… reinforcement. The effects of print orientation, infill pattern, and strain rate on these materials' tensile and compressive properties are analysed. Findings show significant improvements in strength and modulus with the addition of carbon fibres and optimisation of print parameters. Numerical …
-
Σχεδιασμός για την προσθετική κατασκευή, πειραματική διερεύνηση, ευφυή προγνωστική μοντελοποίηση και βελτιστοποίηση της μηχανικής συμπεριφοράς εξαρτημάτων
… findings demonstrate that printing orientation, infill pattern, infill density, layer thickness, thermal processing conditions, and post-processing parameters constitute the dominant factors affecting maximum bending stress, fracture strain, and flexural modulus. The analysis further highlights …
-
Analysis, Modeling, and Prediction of the Thermal and Mechanical Behavior of Polylactic Acid under Fused Deposition Modeling
… numerical models were used to examine how the infill topology impacts the modulus of elasticity for several FDM products. Then a prediction model was developed to predict the tensile behavior of parts given filament structure settings. For investigating process optimization, the numerical model …
-
3D printing of bone tissue engineering scaffolds and production of PEEK-based biocomposites
… the 3D printed solid PEEK specimens with 100% infill rate had 14% porosity and ultimate tensile strength (UTS) of 75.06 MPa that is 33% less than solid injection moulded PEEK. The air gap between infill pattern and entrapped micro-bubbles inside filaments were identified as the main source of …
-
Impact Of Process Parameters And Degradation On Product Quality In Fused Deposition Modeling
… process parameters (i.e., nozzle temperature, infill pattern, infill percentage, build orientation, layer thickness, and printing speed) on seven key performance indicators (KPIs) of parts produced: (1) energy consumption, (2) fabrication duration, (3) material used, (4) mechanical properties, …
-
Scaling up production of reprogrammed cells for biomedical applications
… disc-shaped moulds or printed in a cross-hatch infill pattern and cross-linked with calcium ions. In both discs and printed patterns, hiPSCs recovered from these bioprints showed viability of around 70% even after 4 days of culture when loaded into gelatin-alginate solution in aggregate form. …
-
Vacuum Infiltration of FFF Printed ABS Parts
… with various levels of porosity, as indicated by infill percentage during printing. In the Flat-XYZ, Flat-XYZ-45°, and Edge-XZY build orientations. The 100% infill samples serve as a reference value for the infiltrated 60% infill and 40% infill samples. The vacuum bagging technique utilized in the …
-
Orienting structure to serve medical functions
… CT images of 3D printed cylinders with different infill angles and printing patterns were assessed by comparing their 2D noise power spectra to determine the conditions that produced a minimal and uniform noise. A backfilling approach in which additional polymer was extruded into an existing 3D …
-
Development of local drug delivery device for the treatment of pancreatic cancer resection margin
… of different membranes in thickness, infill percentage, number and size of pores, the best one chosen was 1mm thickness and 75% infill based on drug release ,which was included as part of the Chemo Patch device. The three-dimensional printing parameters were, print speed 15 mm/s, print …
-
Utilising hot melt extrusion and fused deposition modelling based 3D printing technology for the synthesis of solid pharmaceutical dosage forms and innovative drug delivery devices
… 3D printing processing parameters including (infill percentage, infill pattern, printing speed, and layer height) on 3D fabricated solid pharmaceutical dosage form (tablet) manufactured from commercially available drug free polymer; Poly lactic acid (PLA). The analysis assessed how these …
-
Βιομηχανική παραγωγή προϊόντων μικρής ή μεσαίας κλίμακας με χρήση μεθόδων ταχείας πρωτοτυποποίησης, παραμετρικής σχεδίασης & ανάλυσης
… inside the PC products are distinguished in many patterns which are defined entirely by the software that accompanies the PC machines. Throughout our research, it was found that these softwares have limited capabilities regarding both the position they place the internal pattern of the products …