Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"influence coefficient"”.

  1. Efficient methods for integrated structural-aerodynamic wing optimum design

    … of the flexibility matrix and the aerodynamic influence coefficient matrix are developed. An adjoint method is used for the flexibility sensitivity, and a perturbation method is used for the aerodynamic sensitivity. Second a sequential optimization algorithm that employs approximate analysis …

    vt Repository record for Efficient methods for integrated structural-aerodynamic wing optimum design (opens in a new tab)

  2. Evaluation of Spatially-Distributed Snowpack Estimation Using Pattern Recognition

    … data and a digital elevation model and estimate influence coefficient for all pixels in the watershed. Through the concept of influence coefficient, a set of prototypical points can be selected and located. The on-line procedure estimates snowpack properties at these prototypical points and then …

    utahstate Repository record for Evaluation of Spatially-Distributed Snowpack Estimation Using Pattern Recognition (opens in a new tab)

  3. Interaction between floor slabs and shear walls in tall buildings

    … situations are determined by finite element and influence coefficient techniques. The finite element technique idealises the slab-wall structure as an assembly of plate and shell elements and uses an established stiffness analysis to determine the displacements, forces and stress resultants in …

    strathclyde Repository record for Interaction between floor slabs and shear walls in tall buildings (opens in a new tab)

  4. Application of an Extended Inverse Method for the Determination of Ice-induced Loads on Ships

    … a two-year period. The inverse method uses an influence coefficient matrix to relate the measured strain to the input pressure load. Using FEM, strain response functions are fitted at each sensor to generate the terms of the influence coefficient matrix. An optimisation routine is used to solve …

    chalmers Repository record for Application of an Extended Inverse Method for the Determination of Ice-induced Loads on Ships (opens in a new tab)

  5. Comparison of approximate and exact methods for determining the frequencies of vibrating beams

    … It was used only in parts A and B. The Influence Coefficient Method and the application of D'Alembert's Principle, which methods are quite similar, proved to be simple, accurate, and rapid. However, as the number of degrees of freedom increased, the degree of the algebraic equation …

    vt Repository record for Comparison of approximate and exact methods for determining the frequencies of vibrating beams (opens in a new tab)

  6. Dynamic Control of Active Optical Structures Using FEA-Derived State-Space Models

    Active optical systems commonly use influence coefficient methods to map actuator commands to surface deformation, but these static models only describe steady-state behavior and do not capture transient or frequency-dependent structural dynamics. This work develops a finite element analysis …

    rit Repository record for Dynamic Control of Active Optical Structures Using FEA-Derived State-Space Models (opens in a new tab)

  7. Modeling of the cylinder boring process for prediction of cutting force, temperature and surface error

    … predicted cutting forces are used along with an influence coefficient database of the engine block and fixturing to calculate the component of surface error resulting from elastic deflections of the bore wall during machining.

    uiuc Repository record for Modeling of the cylinder boring process for prediction of cutting force, temperature and surface error (opens in a new tab)

  8. Sensitivity and Uncertainty Analysis of Occupancy-related Parameters in Energy Modeling of Unt Zero Energy Lab

    … setpoint, lighting, equipment and occupancy. Influence coefficient (IC) is applied in the sensitivity study, in order to compare the impact of individual parameter on the overall building energy consumption. The study is conducted under Texas weather file as well as North Dakota weather file …

    unt Repository record for Sensitivity and Uncertainty Analysis of Occupancy-related Parameters in Energy Modeling of Unt Zero Energy Lab (opens in a new tab)

  9. Applicability of traditional ice load measurement systems on longitudinally framed ships

    … evaluates the applicability of the traditional Influence Coefficient Matrix (ICM) method to ice-load measurement on a longitudinally framed ship structure. ICM is a matrix that creates a relationship between structural responses and external loads. A finite element model was developed in Abaqus …

    chalmers Repository record for Applicability of traditional ice load measurement systems on longitudinally framed ships (opens in a new tab)

  10. Sensitivity Analysis of Load Distribution in Light-Framed Wood Roof System due to Typical Modeling Parameters

    … This is done by developing and assessing load influence coefficients for various roof-to-wall (RTW) connections. An analytical model of a light-framed wood structure using finite element software is developed. The model has a gable roof system comprised of fink trusses and is modeled in a …

    clemson Repository record for Sensitivity Analysis of Load Distribution in Light-Framed Wood Roof System due to Typical Modeling Parameters (opens in a new tab)

  11. Design of Nozzle Contours for the PWT 16-Ft Transonic Wind Tunnel

    … been made to the contours through the use of an influence coefficient correction technique in an attempt to remove small flow irregularities. This correction technique is not based on aerodynamic theory, and, as a result the corrected contours are not necessarily aerodynamically correct. A second …

    ut-knoxville Repository record for Design of Nozzle Contours for the PWT 16-Ft Transonic Wind Tunnel (opens in a new tab)

  12. A Study of Predicted Energy Savings and Sensitivity Analysis

    … the square zone model. Mean Bias Error (MBE) and Influence Coefficient (IC) have been selected as the statistical methods to analyze the outputs that are obtained from WinAM 4.3. For the saving prediction reliability analysis task, eleven Continuous Commissioning projects have been selected. After …

    tamu Repository record for A Study of Predicted Energy Savings and Sensitivity Analysis (opens in a new tab)

  13. Numerical solution for the submerged pulsating line source in the presence of a free surface

    … Gaussian Elimination, and the behavior of the influence coefficient matrix was tested by using LINPACK routines. The depth of the submerged-source and wave number was kept constant while the length of near field and the number of panels per wavelength was varied systematically. A minimum of 10 …

    vt Repository record for Numerical solution for the submerged pulsating line source in the presence of a free surface (opens in a new tab)

  14. Structural and aerodynamic mistuning in blade aeroelasticity

    … the bases of the multi-scale approach and the influence coefficient method. This is the first time the theoretical framework of the multi-scale method has been extended to accommodate unsteady flow and grid deformation effects. The applications of the multi-scale method on aeroelasticity …

    oxford Repository record for Structural and aerodynamic mistuning in blade aeroelasticity (opens in a new tab)

  15. Flutter and Forced Response of Turbomachinery with Frequency Mistuning and Aerodynamic Asymmetry

    … asymmetry is applied by perturbing the influence coefficient matrix. These aerodynamic perturbations influence both stiffness and damping while traditional frequency mistuning analysis only perturbs the stiffness. Flutter results from random aerodynamic perturbations of all blades showed …

    duke Repository record for Flutter and Forced Response of Turbomachinery with Frequency Mistuning and Aerodynamic Asymmetry (opens in a new tab)

  16. Evaluation of the aerodynamic separation event of a two-stage to orbit launch system

    … (conducted in November 1993) obtained two-body influence coefficient data using the VKF captive trajectory system.</p><p>Results obtained from the 6-DOF computer simulations are presented showing the predicted orbiter separation trajectories over a limited range of vehicle flight conditions. The …

    ut-knoxville Repository record for Evaluation of the aerodynamic separation event of a two-stage to orbit launch system (opens in a new tab)

  17. Physical Insights, Steady Aerodynamic Effects, and a Design Tool for Low-Pressure Turbine Flutter

    … numerical investigation is completed using an influence coefficient approach to study the variation the work-per-cycle contributions of neighboring cascade blades to a reference airfoil. The second part of this research introduces new discoveries regarding the relationship between steady …

    duke Repository record for Physical Insights, Steady Aerodynamic Effects, and a Design Tool for Low-Pressure Turbine Flutter (opens in a new tab)

  18. Approximate Analysis of Three-Dimensional Tall Building Structures

    … representative structural parameters. An area influence coefficient method is presented for the analysis of three-dimensional tall building structures subjected bending to and torsion. The interaction forces between different assemblies in a structure are assumed to be represented sufficiently …

    glasgow Download PDF for Approximate Analysis of Three-Dimensional Tall Building Structures (opens in a new tab)

  19. Hydrologic modeling and climate change study in the Upper Mississippi River Basin using SWAT

    … impact analysis. A sensitivity analysis using influence coefficient method was conducted for eight selected hydrologic input parameters to identify the most to the least sensitive parameters. Calibration and validation of SWAT were performed for the Maquoketa River Watershed for streamflow on …

    iastate Repository record for Hydrologic modeling and climate change study in the Upper Mississippi River Basin using SWAT (opens in a new tab)

  20. Parameter estimation in reconstructing temperature fields during hyperthermia.

    … These methods and a previously developed influence coefficient method for obtaining that matrix are comparatively evaluated by solving a set of numerically simulated inverse hyperthermia problems. An improved state and parameter estimation algorithm has been developed to reduce the total …

    arizona-thes Repository record for Parameter estimation in reconstructing temperature fields during hyperthermia. (opens in a new tab)

Page 1 of 2