Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 38 for “"infusion process"”.
-
Towards a fully integrated resin infusion process
<p>The importance of Resin Infusion dramatically increased in ship and boat industries for the last two decades. Infusion gradually replaces traditional manufacturing techniques, such as hand and spray lay-up. Resin Infusion has mostly been developed with trial and error from the industry. The …
-
Performance evaluation of polyurethane composites using vacuum infusion process
… and corrosion resistance. The pultrusion process is often used to manufacture glass fiber-reinforced polyurethane (PU) composite. The objective of this study is to use thermoset PU resin to manufacture high quality composites for infrastructure applications using vacuum assisted resin …
-
Automated Dry Fibre Placement and Infusion Process Development for Complex Geometries
… and simplification of manufacture. Current processes such as Automated Fibre Placement (AFP) in conjunction with an autoclave cure only partially satisfy these requirements. In order to address industry needs, the potential of the Automated Dry Fibre Placement (ADFP) process in combination …
-
Verification of a Three-Dimensional Resin Film Infusion Process Simulation Model
… resin transfer molding/resin film infusion (RTM/RFI) process simulation model. The model incorporates resin flow through an anisotropic carbon fiber preform, cure kinetics of the resin, and heat transfer within the preform/tool assembly. The computer model can predict the flow front …
-
An infiltration/cure model for manufacture of fabric composites by the resin infusion process
… of advanced textile composites by the resin film infusion process. The simulation model relates the applied temperature and pressure processing cycles, along with the experimentally measured compaction and permeability characteristics of the fabric preforms, to the temperature distribution, the …
-
Monitoring and simulation of the filling and post-filling stages of the resin infusion process
… presented in this thesis is focused on the resin infusion moulding process. The resin infusion process is part of the liquid composite moulding family where a dry reinforcement is impregnated with a liquid resin inside a closed mould to form a composite part. The specificity of resin infusion …
-
Investigation of the Resin Film Infusion Process for Multi-scale Composites Based on the Study of Resin Flow, Void Formation and Carbon Nanotube Distribution
… minimal filtration of nano-particles during processing. The short resin flow lengths enabled by the resin film infusion (RFI) process make this process a prime candidate for the fabrication of multi-scale PMCs. The main objective of this thesis is to validate the possibility of using …
-
An investigation of defect evolution in foam core sandwich structures produced using vacuum assisted resin transfer moulding
In this work, a resin infusion process used by Flight Dynamics Corp. was investigated for the fabrication of low-cost composite sandwich structures. Trials were performed to establish a complete set of potential defects that could develop during the manufacture of E-glass epoxy vinyl ester sandwich …
-
Simulation of Composite Preforming and Liquid Moulding Processes
… methods to simulate composite manufacturing processes. These simulation methods are more effective at conducting manufacturing trials for evaluating the material and processing parameters for a given process. This helps to reduce the risk of manufacturing processes, whilst also reducing the …
-
<em>In Situ</em> Characterization of Voids During Liquid Composite Molding
… Liquid Composite Molding or LCM is a family of processes that has shown significant promise in its potential to reduce process times and cost while maintaining high levels of part quality. However, the majority of research and information on composite processes have been related to …
-
Characterization of Fibre Reinforcements for Non-structural Composite Parts
… and strength. Commonly used manufacturing processes include the Liquid Composite Moulding (LCM) group of processes, where a liquid polymer resin impregnates a dry preform that is prepared in advance. The consistency of the resin infusion process and properties of the final composite are …
-
Process modelling of the thermoset composites
The process modelling of autoclave composites has received much attention over the years. This thesis concentrates on two types of processes namely the prepreg processing method and the resin infusion processing method. The work focuses on the modelling and simulation of the resin flow, heat …
-
Preparation of highly reflective films by supercritical infusion of a silver additive into poly(ether ether ketone)
… handling and coating industries. Supercritical infusion of a silver-containing additive (1,5-cyclooctadiene- 1,1,1,5,5,5-hexafluoroacetylacetonato)silver(I) into a PEEK film was achieved with moderately high density CO2 at various temperatures, pressures, and times. During the infusion process: …
-
Design and Development of Glass-Fibre-Reinforced Polymer and Ultra-High-Performance Fibre-Reinforced Concrete Guideway Girders
… which can be fabricated during the same vacuum infusion process that produces the GFRP shell, is developed and tested. The tensile fatigue behaviour of UHPFRC is characterized through a series of direct tension cyclic tests, showing that for peak cyclic tensile stress below 7.5MPa, there is no …
-
Experimental and numerical investigation on the mechanical and dynamic performance of flax/E-glass hybrid composites
… of flax/E-glass laminates manufactured via resin infusion process, which reflects the production of large structural applications.
-
Fiber-Reinforced Polymer Bridge Girders for Extremely Aggressive Environments
… a preliminary study investigating the vacuum infusion manufacturing process was conducted to verify that the required thicknesses of FRP can be achieved. Simple bending tests were completed on small-scale FRP beams to demonstrate the strength capacity and evaluate any difficulties using the …
-
Biodegradable packaging for corrosion inhibition via supercriticial fluid
… of supercritical fluid (SCF) density upon the infusion depth were examined first. For this study, 10 g of Ecoflex[registered trademark] was infused with NaNO[subscript 2] using SCF densities that ranged from 0.15-0.62 g/cm[subscript 3]. The results demonstrated that fluid density does not play …
-
Life Cycle Assessment of Boatbuildning Process with Ocean Plastic
… Optimists are sustainable, the manufacturing process was evaluated based on a simplified life cycle assessment. A conventional boatbuilding process (without ocean plastic) was used as the control group for the comparative analysis. The results show that the environmental impact of an Optimist …
-
Design, manufacturing and testing of a wound composite axial compressor with integrated shroud
… the past several years, a novel manufacturing process aimed at reducing costs and improving structural properties has been under development at Michigan State University. This prior work established the basic manufacturing concepts and demonstrated the feasibility of utilizing the novel wound …
-
Characterization of the Vacuum Assisted Resin Transfer Molding Process for Fabrication of Aerospace Composites
… (TCAT) efforts were focused on developing novel processing methods to fabricate tailored composite airframe structure. The Vacuum Assisted Resin Transfer Molding (VARTM) processing technique offers a safer, more affordable alternative to manufacture large scale composite fuselages and wing …
Page 1 of 2