Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"injection pump"”.

  1. Diesel fuel injection system simulation

    The injection process of a medium-speed diesel engine was studied in detail, using a computer program developed for this purpose. In the program, the injection pump was replaced with the measured pressure at the junction between the pump and high-pressure pipe. The results were calculated with a …

    aalto Repository record for Diesel fuel injection system simulation (opens in a new tab)

  2. Matrix Acidizing Parallel Core Flooding Apparatus

    … of laboratory experiments is to find an optimum injection rate to create dominant wormholes and provide this information to the field. To conduct various experiments, core flooding setups are created. The setup consists of a core holder, accumulator, overburden pump, injection pump, accumulator, …

    tamu Repository record for Matrix Acidizing Parallel Core Flooding Apparatus (opens in a new tab)

  3. INVESTIGATION OF CO-CURRENT AND COUNTER-CURRENT MULTIPHASE FLOW IN UPSTREAM DRILLING AND PRODUCTION APPLICATIONS

    … removal efficiency increases monotonically with injection pump flow rate. Through 1D transient multiphase flow simulations using OLGA software and validation via small-scale visualization experiments, the study demonstrates that gas removal efficiency exhibits non-linear trends with increasing …

    lsu-thes Repository record for INVESTIGATION OF CO-CURRENT AND COUNTER-CURRENT MULTIPHASE FLOW IN UPSTREAM DRILLING AND PRODUCTION APPLICATIONS (opens in a new tab)

  4. Characterization of spray and combustion of diesel-alcohol blends in a constant volume chamber

    … system has been described, which features a new injection pump system with a new piezoelectric injector, an upgraded LabVIEW control program and a new chamber head component. The new system has been tested and validated for the performance and consistency. Preliminary tests have shown that the …

    uiuc Repository record for Characterization of spray and combustion of diesel-alcohol blends in a constant volume chamber (opens in a new tab)

  5. A novel percutaneous approach to LAA closure using an innovative biocompatible polymer for thrombus prevention and stroke risk reduction

    … testing, numerical analysis, syringe pump data, and rheometer data to assess the material's efficacy and safety. Specifically, the mechanical properties and flow behavior of the material are analyzed, focusing on viscosity, to ensure optimal performance during injection procedures. The …

    texas Repository record for A novel percutaneous approach to LAA closure using an innovative biocompatible polymer for thrombus prevention and stroke risk reduction (opens in a new tab)

  6. EXPERIMENTAL AND COMPUTATIONAL ANALYSIS OF AN ELECTROHYDRODYNAMIC MESOPUMP FOR SPOT COOLING APPLICATIONS

    … Next, to verify the model a mesoscale ion-injection pump was designed and fabricated, followed by a set of experiments that characterized the pump's performance. The experiments will also demonstrate the application potential of the concept in electronics cooling and particularly for spot …

    maryland Repository record for EXPERIMENTAL AND COMPUTATIONAL ANALYSIS OF AN ELECTROHYDRODYNAMIC MESOPUMP FOR SPOT COOLING APPLICATIONS (opens in a new tab)

  7. Effect of Transport Variables on Acid Jetting in Carbonates

    … depend on transport variables such as acid injection rate, velocity of the jet, temperature, and permeability of the formation. Jetting changes these variables and as a result the variation in stimulation result between the matrix dissolution mechanism of acid jetting and that of …

    tamu Repository record for Effect of Transport Variables on Acid Jetting in Carbonates (opens in a new tab)

  8. System identification of the smoke opacity vs fuel metering in a diesel engine

    … mechanism with a modified fuel metering pump, an in-line smoke opacity meter, and an operating software written in C and Assembly languages. Temperatures at various engine locations and air/fuel flow were also measured. The spectral analysis was implemented to find the frequency response …

    iastate Repository record for System identification of the smoke opacity vs fuel metering in a diesel engine (opens in a new tab)

  9. Processing of bulk hierarchical metal-metal composites

    <p>Spray forming with co-injection of a solid particulate phase to form a metal-metal composite has been studied as a new route for manufacture. Two Al-based matrices were investigated: Al-12Si for testing the feasibility of the new manufacturing route and Al-4Cu for providing better mechanical …

    oxford Repository record for Processing of bulk hierarchical metal-metal composites (opens in a new tab)

  10. The histamine-infusion test of gastric acid secretion in man

    … a limited extent in studies in man. Using a slow injection pump and disposable sterile equipment, a technique was evolved whereby this method of stimulation could be used to study large numbers of patients and control subjects. Dose-response curves were determined, and from these the dose-rate of …

    glasgow Download PDF for The histamine-infusion test of gastric acid secretion in man (opens in a new tab)

  11. Cavitation and the application of methods for erosion prediction in high pressure fuel injection systems

    … Shoe and Guide assembly in a high-pressure fuel injection pump, and a control orifice in a prototype diesel injector. Cavitating flow dynamics are investigated in a Venturi nozzle. Computational Fluid Dynamics (CFD) results are compared with those from previous experiments. Analyses performed on …

    city-london Download PDF for Cavitation and the application of methods for erosion prediction in high pressure fuel injection systems (opens in a new tab)

  12. From Enhanced Oil Recovery to Geothermal Energy: Integrated Feasibility and Techno-Economic Assessment of CO2-Plume Geothermal and Carbon Storage in Mature Oil Reservoirs

    … 13–23 MWth/km2 are achieved, and continued CO2 injection during CPG increases geological storage by 80–280% relative to EOR alone. Prior waterflooding is identified as a first-order negative control on geothermal potential: increasing waterflood volume from 1 to 5 pore volumes reduces gross …

    ethz Repository record for From Enhanced Oil Recovery to Geothermal Energy: Integrated Feasibility and Techno-Economic Assessment of CO2-Plume Geothermal and Carbon Storage in Mature Oil Reservoirs (opens in a new tab)

  13. Návrh zařízení pro zatěžování hřídele čerpadla systému Common Rail radiálními silami

    Cílem této diplomové práce je předběžný návrh zkušebního zařízení na testování vstřikovacích čerpadel systému Common Rail pomocí radiálního zatížení hnacího hřídele. Práce přináší stručný přehled konstrukčních řešení soudobých čerpadel tohoto systému, na který následně navazuje návrh zařízení.

    brno-tech Repository record for Návrh zařízení pro zatěžování hřídele čerpadla systému Common Rail radiálními silami (opens in a new tab)

  14. Estimation of Arterial Diameter Using Bioimpedance Spectroscopy on a Human Wrist Phantom

    … artery was constricted by a commercial desktop injection pump, and the impedance change was synchronously measured using the multi- frequency impedance analyser. Main results: The simulation results indicated the promising abilities of band electrode method to generate a more uniform current …

    auckland-tech Repository record for Estimation of Arterial Diameter Using Bioimpedance Spectroscopy on a Human Wrist Phantom (opens in a new tab)

  15. Rekonstrukce pohonu vysokotlakého vstřikovacího čerpadla s převodovým poměrem 1,5

    Diplomová práce se zaměřuje na rekonstrukci pohonu vysokotlakého vstřikovacího čerpadla s převodovým poměrem 0,5 na převodový poměr 1,5. Vstřikovací čerpadlo bude použito pro čtyřválcový vznětový motor. Konečné řešení bylo vypracováno klasickým postupem. Pro rekonstrukci byly použity počítačové …

    brno-tech Repository record for Rekonstrukce pohonu vysokotlakého vstřikovacího čerpadla s převodovým poměrem 1,5 (opens in a new tab)

  16. Racionalizace výroby dílů vstřikovacích čerpadel

    Tato práce je zaměřena na racionalizaci výrobního procesu pístů a elementů vstřikovacích čerpadel v závislosti na zlepšení jakosti finálních výrobků. Dnešní technologie využívající převážně jednoúčelové stroje, u kterých je kvalita výroby výrazně závislá na schopnostech a činnosti pracovníka, bude …

    brno-tech Repository record for Racionalizace výroby dílů vstřikovacích čerpadel (opens in a new tab)

  17. Palivová vstřikovací čerpadla vznětových motorů

    Bakalářská práce na téma „Palivová vstřikovací čerpadla vznětových motorů“ zachycuje přehled palivových vstřikovacích čerpadel pro vznětové motory a jejich vývoj. Smyslem této práce je vysvětlit a popsat princip funkce vstřikovacích čerpadel, a provést jejich rozdělení podle konstrukčního řešení. …

    brno-tech Repository record for Palivová vstřikovací čerpadla vznětových motorů (opens in a new tab)

  18. Racionalizace výroby skříní

    Práce se zabývá reorganizací výroby těles skříní vstřikovacích čerpadel, kdy stávající řešení výroby pomocí obráběcí linky nevyhovovalo požadavkům na pružnou výrobu. Po krátkém uvedení firmy jsou zpracovány kroky vedoucí k náhradě linky obráběcími centry. Mezi hlavní body práce patří návrh operací, …

    brno-tech Repository record for Racionalizace výroby skříní (opens in a new tab)

  19. Bezdemontážní diagnostika vznětového motoru

    Cílem této práce je shrnout možnosti bezdemontážní diagnostiky závad vznětového motoru a prakticky je vysvětlit. První část práce je zaměřená na popis jednotlivých komponent a používaných měřidel. Čitatel se seznámí se základními pojmy a principy jednotlivých částí motoru a jejich funkcí. Druhá …

    brno-tech Repository record for Bezdemontážní diagnostika vznětového motoru (opens in a new tab)

Page 1 of 2