Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 27 for “"input current ripple"”.
-
A Modified Boost Converter with Reduced Input Current Ripple
… with any DC/DC converter. Reducing a converter’s input ripple helps prevent switching noise from spreading to other systems on a shared DC power bus. This thesis covers the analysis, simulation, and implementation of a recently-proposed boost converter topology, alongside an equivalent standard …
-
A Multiphase Modified Boost Converter with Reduced Input Current Ripple: Combined Capacitors
… in DC-DC converters. Multiphase reduces the ripple observed on both the input and output waveforms; however, it may not be enough to connect to sensitive power sources such as renewable energy sources. A single-phase modified boost converter demonstrates the ability to acquire very minimal …
-
A Modified Multiphase Boost Converter with Reduced Input Current Ripple: Split Inductance and Capacitance Configuration
… Converter design must consider noise imposed on input and output nodes which connect to and influence the operation of other devices. Excessive noise introduces EMI which can damage sensitive circuits or impede their operation. High ripple current degrades battery lifetime and reduces operating …
-
Control of Pseudo-Sinusoidal Switched Reluctance Motor with Zero Torque Ripple and Damped Input Current Ripple
… advantage and ruggedness. However, the torque ripple and bus current ripple of SRM restrict its application range compared with traditional AC and DC motors due to the doubly salient pole structure and the highly non-linear coupling between torque, rotor position and phase current. As a result …
-
Asymmetric interleaving in low-voltage CMOS power management with multiple supply rails
… interleaving as a method of reducing the input current ripple for the power converter. Asymmetric interleaving is a method of control that allows for a further reduction, and in some cases complete cancellation, of this input current ripple. This work looks at some of the challenges for a …
-
The Modified-Multiphase Boost Converter: Combined Inductors and Capacitors Topology
… has already been proven to drastically reduce input current ripple by about 40% in a single-phase implementation. By placing two modified boost converters in parallel with interleaving main switches (multiphase), the input inductors and modified capacitors of the modified topology can be …
-
Three-Phase Single-Stage Isolated AC–DC Converters for Electric Vehicle Battery Charging
… battery charging. Both converters integrate input-current shaping, high-frequency isolation, and constant-current/constant-voltage (CC/CV) output regulation within a single power-conversion stage. The first topology is a three-phase single-stage soft-switching converter comprising a …
-
Topological Modifications of Dual Active Bridge DC-DC Converter for Renewable Energy Systems
… reduced conduction losses, and mitigation of input current ripple. First, a three-level current-fed neutral-point-clamped (3L-CF NPC) DAB converter is introduced. By employing low-voltage-rated MOSFETs and dual-phase-shift modulation, the proposed converter reduces conduction losses and …
-
Improved Forward Topologies for DC-DC applications with Built-in Input Filter
… leakage inductance, and the pulsating input current waveform. The transformer is driven in a unidirectional fashion in the forward converter; a tertiary forward converter (TFC) is an example of this. Therefore, the third winding and reset diode must be provided with an adequate period …
-
Current source dc-dc and dc-ac converters with continuous energy flow
This work considers current sourced power electronic converters. The thesis classifies and presents several new single-phase and three-phase differential-mode current source inverters that evolve from the basic dc-dc converter topologies. The switched, large-signal, and small-signal models of these …
-
Modified Control for Single-Phase Fuel Cell Systems with Input Ripple Compensation and Improved Output Quality
… introduces a second harmonic component in the current drawn from the fuel cell source. This low-frequency current ripple has been found to be detrimental to the performance, lifespan, and efficiency of the fuel cell, if not adequately controlled. This thesis presents a current control method …
-
ANALYSIS AND DESIGN OF IMPULSE COMMUTATED SOFT-SWITCHING CURRENT-FED CONVERTERS
In renewable energy applications, current-fed dc/dc converters with low input current ripple are viable alternatives for voltage-fed converters. With their innate boost nature and inherent short circuit protection, these step-up converters can provide high voltage gain with lower turns ratio. The …
-
Single-Stage Interleaved Photovoltaic (PV) Step-up Resonant Converter Modules with Integrated PV MPPT for Magnetron Application
… satisfy the magnetron load's high-voltage, low-ripple, and high-efficiency demands. In this thesis, a high-gain single-stage DC/DC converter with soft-switching capability is proposed for PV-driven magnetron applications. This thesis is divided into two main sections. The first part addresses …
-
A single-stage interleaved resonant power factor correction converter
… consists of two main stages; The first is current-shaping stage to improve PF and the second is to provide isolation and tight regulation over the output voltage. Recently, the research on AC/DC converters has focused on optimizing the converter design to be more reliable and efficient for …
-
Sensorless Digital Control for Solar DC Optimizers Used in DC Microgrids
… task is done through a variable frequency peak current mode (PCM) control technique. Implementing this ZVS control scheme increases the input inductor current ripple. Therefore, an interleaved structure is used, which is able to reduce the input current ripple through the phase shifting of the …
-
Bidirectional resonant chargers for e-mobility
… switching frequency range, reduced component current stress, and smaller transformer size. The second technique is a unified bidirectional resonant frequency tracking method for the CLLC DC/DC stage of battery chargers, which decreases bidirectional resonance tracking costs and complexity …
-
Design and Comparison of passive component requirements of a matrix converter and voltage-source based back-to-back converter
… to eliminate the high frequency switching ripple present in the input current of AC/AC pulse-width modulated (PWM) converters. Design of such filters requires an estimation of the higher harmonic components present in various voltages and currents. Due to pulse-width modulation (PWM), the …
-
Single-Stage Grid-Connected Multilevel Converters: Topologies and Control Strategies
… to cancel out the double-line frequency ripple in the input current profile. This enables the converter to be employed in a broad range of grid-connected applications with improved efficiency without adding extra components to the circuit. The experimental results show more than 1% …
-
Propulsion-Machine-Integrated Universal Onboard Chargers for Electric Vehicles
… factor correction (PFC) and battery voltage/current regulation without any bulky add-on passive components. The machine windings are utilized as mutually coupled inductors for PFC, and the inverter along with the machine windings constructs a two-channel interleaved boost converter. The input …
-
A High Power, High Step-up DC/DC Converter for Fuel Cell Range Extender Vehicles
… of the proposed converter also assures that both input current ripple and output voltage ripple are performing well for the health and lifespan of the fuel cell and high voltage battery of the vehicle. A 3-kW prototype is also built and tested to verify the performance of the proposed topology, …
Page 1 of 2