Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 1198 for “"inserts"”.

  1. MACHINING WEAR OF CEMENTED CARBIDE INSERTS

    … (F-grade; Toshiba Tungaloy) cemented carbide inserts when machining medium-carbon steel under different cutting conditions (cutting speed =50-300 m/min, feed rate =0.1-0.3 mm/rev ). The effects of heat treatment and thus carbide grain size on the mechanical properties and machining wear of …

    nus Repository record for MACHINING WEAR OF CEMENTED CARBIDE INSERTS (opens in a new tab) Download file for MACHINING WEAR OF CEMENTED CARBIDE INSERTS (opens in a new tab)

  2. Cutting edge controlled wear of alumina inserts

    Zirconia-toughened alumina tool inserts were chosen for turning medium carbon steel at high cutting speeds of up to 1000 m/min. Careful study of the tool after the machining revealed that the wear mechanisms along the cutting edge and at the flank wear land are distinctively different. The cutting …

    nus Repository record for Cutting edge controlled wear of alumina inserts (opens in a new tab) Download file for Cutting edge controlled wear of alumina inserts (opens in a new tab)

  3. The behavior of large shear inserts in concrete

    … of the concrete bearing capacity around steel inserts having an embedment length/diameter ratio approaching unity. Tests were performed on eight inserts that were cast into a prototype reinforced concrete slab similar to the concrete floor slab designed for the GCEP facility. An eccentric shear …

    utk-theses Repository record for The behavior of large shear inserts in concrete (opens in a new tab)

  4. Pulsed laser patterning of Toric contact lens inserts

    … of laser interferometry in marking the metal inserts which will subsequently be transferred to lens surface during injection molding. For the research project stainless steel was selected as the material from the commonly used materials for the lens inserts. The marking of stainless steel with …

    concordia Download PDF for Pulsed laser patterning of Toric contact lens inserts (opens in a new tab)

  5. Failure Mechanisms of High-Pressure Die Cast Additive Inserts

    … evaluating the life cycle of repaired inserts, and analyzing their performance under thermal cycling. The goal is to improve die durability, optimize manufacturing processes, and reduce costs.

    guelph Repository record for Failure Mechanisms of High-Pressure Die Cast Additive Inserts (opens in a new tab)

  6. In situ gelling nasal inserts for prolonged drug delivery

    … develop and characterize in situ gelling nasal inserts: a new, bioadhesive, solid dosage form for the prolonged systemic drug delivery via the nose. The inserts imbibe nasal fluid from the mucosa and form a gel in the nasal cavity to avoid foreign body sensation. This gel adheres to the nasal …

    fu-berlin Repository record for In situ gelling nasal inserts for prolonged drug delivery (opens in a new tab)

  7. Topographic imaging of tool wear in multilayer coated inserts

    Thesis (M.S.)--Michigan State University. Department of Mechanical Engineering, 2004

    msu Repository record for Topographic imaging of tool wear in multilayer coated inserts (opens in a new tab)

  8. Stress distribution in rectangular plates with inserts under axial loading.

    … in finite plates containing rectangular inserts and subjected to axial loads has been investigated in this thesis. For obtaining the solutions, the basic differential equations have been reduced in terms of finite difference form. The influence of modulus of elasticity, shape and …

    ottawa-retro Repository record for Stress distribution in rectangular plates with inserts under axial loading. (opens in a new tab)

  9. Hydrogel ocular inserts for the treatment of infectious bovine keratoconjunctivitis

    <p>Hydrogel coated ring shaped ocular inserts (containing the antibiotic, tylosin tartrate) were used in an evaluation of the effectiveness of polymeric ocular drug release devices for treating infectious bovine keratoconjunctivitis. Two major in vivo tests were done: a treatment test using …

    iastate Repository record for Hydrogel ocular inserts for the treatment of infectious bovine keratoconjunctivitis (opens in a new tab)

  10. Theoretical Feasibility Study of Preferential Hyperthermia Using Silicon Carbide Inserts

    … design model with multiple (4) silicon carbide inserts, the DTD could be attained in a tumor up to 3.5 cm in diameter. This study involved using the commercially available software package ANSYS 7.0 program to model a spherical 2 cm tumor, assuming the tumor is located in deep tissue with a …

    vt Repository record for Theoretical Feasibility Study of Preferential Hyperthermia Using Silicon Carbide Inserts (opens in a new tab)

  11. Dependency of Loosening Parameters on Secondary Locking Features of Threaded Inserts

    … on secondary locking features of threaded inserts subjected to dynamic shear loads. Secondary locking is used to assist and/or provide redundancy to the primary locking feature (threads) in preventing preload loss in almost any mechanical applications. Two different secondary locking …

    usf Repository record for Dependency of Loosening Parameters on Secondary Locking Features of Threaded Inserts (opens in a new tab)

  12. Design, fabrication, and analysis of foam composite structures with metal inserts

    … In this work, the anchors are in the form of inserts and are imbedded in the foam during the foaming process. Flexural testing was conducted on different metal foam configurations to establish typical interaction trends. The load-deflection response, mode of failure and fracture stresses of …

    ottawa-retro Repository record for Design, fabrication, and analysis of foam composite structures with metal inserts (opens in a new tab)

  13. Investigating Out-of-Order Inserts in Large-Scale IoT Data Systems

    Markmið verkefnisins var að þróa prófunarkerfi fyrir Controlant sem getur hermt eftir gagnastraumum frá IoT-tækjum og metið áhrif gloppóttra gagna á afköst gagnageymslukerfa. Kerfið samanstendur af hermi sem býr til regluleg og óregluleg mæligögn, hlaðara sem flytur gögn inn í gagnainnviði …

    reykjavik Repository record for Investigating Out-of-Order Inserts in Large-Scale IoT Data Systems (opens in a new tab)

Page 1 of 60