Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 47 for “"intake system"”.

  1. Manifold design for a marine diesel air intake system

    The performance of the air intake system in a diesel engine could limit the overall engine performance. The intake manifold is an important part of the air intake system where enough air should be guided to the cylinder. Compactness is a conflicting feature to performance as engine rooms in …

    chalmers Repository record for Manifold design for a marine diesel air intake system (opens in a new tab)

  2. Design and Analysis of the Intake System of a Formula SAE Car

    … takes a look at the design process of the air intake system of the FSAE car. Over the years, much of the design of this system had been carried out through an iterative trial-and-error process, so the study attempts to identify the scientific and engineering principles pertaining to the design …

    nus Repository record for Design and Analysis of the Intake System of a Formula SAE Car (opens in a new tab) Download file for Design and Analysis of the Intake System of a Formula SAE Car (opens in a new tab)

  3. Implementation of Active Noise Control on the air intake of a truck

    … costs for realizing an active noise control system. On a truck, the air intake system is con-nected to the rear wall of the cabin and the pressure pulsations inside the intake system produce air borne noise in the cabin from the duct mouth and the duct wall. Structure borne noise is …

    chalmers Repository record for Implementation of Active Noise Control on the air intake of a truck (opens in a new tab)

  4. Multiphase CFD simulation of water separation in automotive air intake systems

    … process as well for the cab climate control systems. Thus, it is important to achieve e cient water separation in the air intake system. Depending on the size and velocity of the water droplets, the water will be separated from the air and exit through the drainage, enter the air intake …

    chalmers Repository record for Multiphase CFD simulation of water separation in automotive air intake systems (opens in a new tab)

  5. Virtual sensor for air mass flow measurement in an SI engine: Application of distributed lumped modelling in prediction of air mass flow into the cylinder of SI combustion engines

    … of the inlet manifold was chosen, where the intake system is separated into very small sections which are distributed continuously throughout the volume of the intake until entering the cylinder. This technique is validated against a CFD model of the engine’s intake system and real engine …

    bradford Repository record for Virtual sensor for air mass flow measurement in an SI engine: Application of distributed lumped modelling in prediction of air mass flow into the cylinder of SI combustion engines (opens in a new tab)

  6. Intake flow analysis of a pulsed detonation engine

    … and modified to explore unsteady flow within the intake system of a pulse detonation engine (PDE). Using a quasi-one-dimensional approach the program provides insight into the unsteady nature of localized equivalence ratios to include their effects on PDE performance. The original FORTRAN program …

    alabama Repository record for Intake flow analysis of a pulsed detonation engine (opens in a new tab)

  7. Characterization of the Effects of Jet Radial Position on Entrainment Ratio in a Subsonic Ejector

    The work investigated an ejector-based intake, the Atlantis Intake System (AIS), in static conditions. A control volume (CV) analysis was presented and used to estimate the entrainment ratios of the AIS. The CV analysis also estimated momentum loss due to the jet’s interaction with the mixing …

    calgary Repository record for Characterization of the Effects of Jet Radial Position on Entrainment Ratio in a Subsonic Ejector (opens in a new tab)

  8. EFFECT OF INTAKE EXPANSION CHAMBER VOLUME ON ENGINE PERFORMANCE PARAMETERS

    … of an expansion chamber and feasibility to damp intake air pressure fluctuations in order to accurately measure the air flow rate into an engine. Forced by competition and strict emission regulations, automotive manufacturers have been devoting remarkable efforts to improve fuel conversion …

    mtu Repository record for EFFECT OF INTAKE EXPANSION CHAMBER VOLUME ON ENGINE PERFORMANCE PARAMETERS (opens in a new tab)

  9. Combustion and Flame Stabilization in a Static Ejector Ramjet Combustor

    … ramjet (ERJ) engine equipped with the Atlantis Intake System (AIS) was tested experimentally, focusing on the aspects of flame stabilization in the combustion chamber. Perforated plate flame stabilizers of various blockage ratio, ranging from 0 (no blockage) to 59.7% were tested. Engine wall …

    calgary Repository record for Combustion and Flame Stabilization in a Static Ejector Ramjet Combustor (opens in a new tab)

  10. Flow Acoustic Effects on a Commercial Automotive Air Intake Silencer - A Numerical Study using Computational Fluid Dynamics

    … by turbo-compressors in combustion engine air intake systems is often mitigated by broad-band high-frequency duct silencers. The acoustic performance of a developed silencer design is generally obtained numerically without influence of duct mean flow, using acoustic computer aided engineering …

    chalmers Repository record for Flow Acoustic Effects on a Commercial Automotive Air Intake Silencer - A Numerical Study using Computational Fluid Dynamics (opens in a new tab)

  11. Development of guidelines for exhaust system design from fundamental gas dynamics studies

    … of the relationship between exhaust system geography, the exhaust port pressure history and the gas exchange process in reciprocating four-stroke engines. The study was conducted in four phases. In the first phase, an extensive experimental programme was undertaken, during which key …

    strathclyde Repository record for Development of guidelines for exhaust system design from fundamental gas dynamics studies (opens in a new tab)

  12. Experimental Investigation of a Preheated-Fuel Ejector Ramjet at Static Condition

    … ejector ramjet (ERJ) equipped with the Atlantis Intake System (AIS) under static conditions using methane as the working fuel. Stainless steel coils of varying lengths and diameters were installed within the combustor to serve as regenerative heat exchangers. Jet preheating was found to reduce …

    calgary Repository record for Experimental Investigation of a Preheated-Fuel Ejector Ramjet at Static Condition (opens in a new tab)

  13. Turbulent Combustion Modeling of an Ejector Ramjet Propulsion System

    The Atlantis Intake System (AIS) is a novel design for a ramjet inlet intended to produce thrust through a wide range of flight Mach numbers, including at static conditions, by operating as an ejector-ramjet. A computational fluid dynamics study is performed to assess the change in performance of …

    calgary Repository record for Turbulent Combustion Modeling of an Ejector Ramjet Propulsion System (opens in a new tab)

  14. Assessment of Turbulence Modelling for Compressibility Effects in Ejector Ramjet Applications

    … supersonic jet, a key component of the Atlantis Intake System ejector ramjet. The third-party OpenFOAM compressible flow solver, pimpleCentralFOAM, is used to simulate a Mach 1.25 axisymmetric jet discharging inside a mixing tube and is compared against PIV data. CFD results were found to …

    calgary Repository record for Assessment of Turbulence Modelling for Compressibility Effects in Ejector Ramjet Applications (opens in a new tab)

  15. An Experimental Investigation of Ejector Ramjet Performance at Static Conditions

    … ejector ramjet (ERJ) equipped with the Atlantis Intake System (AIS) was tested at static conditions. For static tests with no forward velocity, the AIS ERJ successfully entrained and mixed the stagnant surrounding air to create a stoichiometric mixture of 17.2 when the Mach 2 primary jet’s total …

    calgary Repository record for An Experimental Investigation of Ejector Ramjet Performance at Static Conditions (opens in a new tab)

  16. Queueing analysis of two healthcare systems where physician activity is offloaded to supporting health professionals

    … a musculoskeletal screener, and a central intake referral system for osteoarthritis patients. The second chapter presents a queueing and simulation approach to analyze the impact of an alternative care provider in a rheumatologist consultation system on waiting time and specialist …

    calgary Repository record for Queueing analysis of two healthcare systems where physician activity is offloaded to supporting health professionals (opens in a new tab)

  17. Volumetric efficiency modeling of a four stroke IC engine

    … parameters such as valve timing, valve lift, intake and exhaust runner length, and intake and exhaust pressure. To explore how these parameters impact volumetric efficiency, a 1D unsteady thermal fluid analysis is performed to determine the instantaneous cylinder pressure and the mass flow …

    colostate Repository record for Volumetric efficiency modeling of a four stroke IC engine (opens in a new tab)

Page 1 of 3