Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 304 for “"interdiffusion"”.

  1. Interdiffusion Study Of Mg-aa6061 System

    … electron microscopy was used to inspect the interdiffusion zone, while phase identification was performed using X-ray energy dispersive spectroscopy. One specific phase that exists in the binary Mg-Al system, labeled “ε” was observed and characterized by transmission electron microscopy. From …

    ucf Repository record for Interdiffusion Study Of Mg-aa6061 System (opens in a new tab)

  2. Interdiffusion Reaction Between Uranium-zirconium And Iron

    U-Zr metallic fuels cladded in Fe-alloys are being considered for application in an advanced Sodium-Cooled Fast Reactor (SFR) that can recycle the U-Zr fuels and minimize the long-lived actinide waste. To understand the complex fuel-cladding chemical interaction of the U-Zr metallic fuel with …

    ucf Repository record for Interdiffusion Reaction Between Uranium-zirconium And Iron (opens in a new tab)

  3. Interdiffusion phenomena at partially miscible polymer interfaces

    … on understanding the effect of miscibility on interdiffusion phenomena in bilayers of polystyrene (PS) and the statistically random copolymer, poly (styrene-r-4-bromostyrene) (PBS). Miscibility in such systems can be quantified by N*chi, where N* is an effective degree of polymerization and chi …

    iastate Repository record for Interdiffusion phenomena at partially miscible polymer interfaces (opens in a new tab)

  4. Interdiffusion And Impurity Diffusion In Magnesium Solid Solutions

    … tracer diffusion data is not available. Interdiffusion of Mg solid solution with Zn also does not exist in literature. The diffusional interaction of Al and Zn in Mg solid solution at temperatures ranging from 623 – 723K was examined using solid-to-solid diffusion couple method. The …

    ucf Repository record for Interdiffusion And Impurity Diffusion In Magnesium Solid Solutions (opens in a new tab)

  5. Impurity And Interdiffusion In The Magnesium-aluminum System

    … energy for growth. Concentration-dependent interdiffusion coefficients were determined using the Boltzmann-Matano method. Interdiffusion in the β-Mg2Al3 phase was the highest, followed by the γ-Mg17Al12 phase, the Al solid solution and the Mg solid solution. Intrinsic diffusion coefficients …

    ucf Repository record for Impurity And Interdiffusion In The Magnesium-aluminum System (opens in a new tab)

  6. Solid-liquid interdiffusion bonding for MEMS device integration

    … performance and smaller footprint. Solid-liquid interdiffusion (SLID) bonding is one of the developed low bonding temperature methods, which is studied in this thesis by utilizing copper-tin, gold-tin and zinc-aluminum based metallurgical systems by investigating their thermodynamic-kinetic …

    aalto Repository record for Solid-liquid interdiffusion bonding for MEMS device integration (opens in a new tab)

  7. Interdiffusion Analysis For Nicocraly And Nial Vs. Various Superalloys

    … to oxidation/hot-corrosion, and multicomponent interdiffusion from and into the superalloy substrate. In this study, the rate of Al interdiffusion into selected Ni-base superalloys using various diffusion couples of two-phase NiCoCrAlY (beta + gamma) and single beta-phase NiAl with the selected …

    ucf Repository record for Interdiffusion Analysis For Nicocraly And Nial Vs. Various Superalloys (opens in a new tab)

  8. Phenomenology And Experimental Observations In High Temperature Ternary Interdiffusion

    … method to extract composition dependent ternary interdiffusion coefficients from a single diffusion couple experiment is presented. The calculations involve direct determination of interdiffusion fluxes from experimental concentration profiles and local integration and differentiation of …

    ucf Repository record for Phenomenology And Experimental Observations In High Temperature Ternary Interdiffusion (opens in a new tab)

  9. Low-temperature solid-liquid interdiffusion bonding for heterogeneous integration

    … bonding processes based on the solid–liquid interdiffusion (SLID) technique utilizing Cu–Sn–In metallurgy. The eutectic behaviour of Sn–In allows a significant reduction of the bonding temperatures from a typical bonding temperature above 250 °C down to 150 °C. Microstructural …

    aalto Repository record for Low-temperature solid-liquid interdiffusion bonding for heterogeneous integration (opens in a new tab)

  10. Study of Si-Ge interdiffusion with highly n-type doping

    … technique to realize Ge lasing. However, Si-Ge interdiffusion during high-temperature growth or fabrication steps changes the distribution of Ge fraction and increases atomic intermixing, which degrades the device performance. Studies on the Si-Ge interdiffusion with high Ge fraction and P …

    ubc Repository record for Study of Si-Ge interdiffusion with highly n-type doping (opens in a new tab) Download PDF for Study of Si-Ge interdiffusion with highly n-type doping (opens in a new tab)

  11. Interdiffusion, Crystallography and Mechanical Properties of Nickel Manganese Gallium Alloys

    … the NiMnGa ternary alloys. Phase equilibria, interdiffusion behavior, microstructural and crystallographic development, and mechanical properties in NiMnGa alloys were systematically examined. Selected diffusion couples between pure Ni, Ni25Mn75 and four ternary off-stoichiometric NiMnGa …

    ucf Repository record for Interdiffusion, Crystallography and Mechanical Properties of Nickel Manganese Gallium Alloys (opens in a new tab)

  12. Effects Of Allotropic Transformations On Interdiffusion Behavior In Binary Systems

    … upon diffusion. This study investigated the interdiffusion behavior of three binary systems, namely, Mo-Zr, Fe-Mo, and Fe-Zr. The main interest in these particular metals is for application in nuclear fuel assemblies. Nuclear fuel plates generally consist of two main components which are the …

    ucf Repository record for Effects Of Allotropic Transformations On Interdiffusion Behavior In Binary Systems (opens in a new tab)

  13. Numerical analysis of isothermal variation of concentration-dependent interdiffusion coefficient

    … influenced by the concentration-dependent interdiffusion coefficient (D(C)). It is generally assumed in the literature that the dependence of the interdiffusion coefficient on concentration is isothermally constant. However, this may not be the case because of the evolution of diffusion …

    manitoba Repository record for Numerical analysis of isothermal variation of concentration-dependent interdiffusion coefficient (opens in a new tab)

  14. Time-varying concentration-dependent interdiffusion coefficient in the Cu-Ni system

    … and performance analysis. The isothermal interdiffusion coefficient is one of the crucial parameters for characterizing this process. Although the interdiffusion coefficient is commonly acknowledged as a function of temperature and concentration (𝐷=𝐹(𝐶,𝑇)), its time dependence cannot be …

    manitoba Repository record for Time-varying concentration-dependent interdiffusion coefficient in the Cu-Ni system (opens in a new tab)

  15. A systematic study of silicon germanium interdiffusion for next generation semiconductor devices

    … electronic and optoelectronic devices. Si-Ge interdiffusion during high temperature growth or fabrication steps changes the distribution of Ge fraction and stress, and increases atomic intermixing, which degrades device performance. It is of technological importance to study Si-Ge …

    ubc Repository record for A systematic study of silicon germanium interdiffusion for next generation semiconductor devices (opens in a new tab) Download PDF for A systematic study of silicon germanium interdiffusion for next generation semiconductor devices (opens in a new tab)

  16. Development of a finite element model for calculating concentration dependent interdiffusion coefficient

    … of diffusion effects is concentration-dependent interdiffusion coefficient, D(C). Existing standard analytical methods of extracting D(C) from experimental concentration profiles such as the Boltzmann-Matano, Sauer-Freise, Wagner, and Hall methods have some flaws, which is a major concern for …

    manitoba Repository record for Development of a finite element model for calculating concentration dependent interdiffusion coefficient (opens in a new tab)

Page 1 of 16