Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 248 for “"interfacial area"”.

  1. Interfacial Area Measurement Using a Radioisotope Technique

    <p> A radioactive technique to determine interfacial area between solid-liquid and liquid-liquid phases has been investigated. Plastic and liquid scintillators and β-particles from tritium solution were used for this purpose.</p> <p> The tritium β-particles have a very short range (about 5 μm in …

    mcmaster Repository record for Interfacial Area Measurement Using a Radioisotope Technique (opens in a new tab)

  2. Characterizing air-water interfacial area in variably saturated sandy porous media

    … tracer method was used to measure air-water interfacial area for eight porous media. The experimental results were used to investigate the influencing factors of the magnitude of air-water interfacial area and the relationship between the air-water interfacial area and water saturation, and …

    arizona-thes Repository record for Characterizing air-water interfacial area in variably saturated sandy porous media (opens in a new tab)

  3. Effect of Flow Blockages on Interfacial Area in Two-Phase Flows

    The interfacial area between two fluid phases governs the rate which mass, momentum and energy can be exchanged. Modern approaches to calculating the evolution of the interfacial area in a fluid system involves modelling each of the coalescence and fragmentation mechanisms. A review of current …

    mcmaster Repository record for Effect of Flow Blockages on Interfacial Area in Two-Phase Flows (opens in a new tab)

  4. The measurement of interfacial area in concurrent gas-liquid flow through packed beds

    … coefficient, k<sub>L</sub>, and the effective interfacial area, a, were affected significantly by the liquid and gas velocities, and were somewhat higher than for countercurrent operation. Values of k<sub>L</sub> a were higher for concurrent flow by factors of two to three.</p><p>Values of …

    ut-knoxville Repository record for The measurement of interfacial area in concurrent gas-liquid flow through packed beds (opens in a new tab)

  5. The significance of grouping and missed bubbles on interfacial area concentration and void fraction

    … relations will be discussed in this study, the interfacial area concentration and void fraction. The Interfacial area concentration is directly affected by the number of bubbles and how these bubbles are categorized into groups. In this study, a new algorithm was implemented to account for …

    must-thes Repository record for The significance of grouping and missed bubbles on interfacial area concentration and void fraction (opens in a new tab)

  6. The Effect Of Carbon Nanotube/organic Semiconductor Interfacial Area On The Performance Of Organic Transistors

    … fabricating high-performance OFET is the large interfacial barrier between metal electrodes and OSC which results in low charge injection from the metal electrodes to OSC. In order to overcome the challenge of low charge injection, carbon nanotubes (CNTs) have been suggested as a promising …

    ucf Repository record for The Effect Of Carbon Nanotube/organic Semiconductor Interfacial Area On The Performance Of Organic Transistors (opens in a new tab)

  7. Impact of grain morphology on the temporal evolution of interfacial area during multi-phase flow in porous media

    … such as trapped fluid volumes and contact area between two immiscible fluids (interfacial area). However, these methods can be expensive and tedious. A well designed numerical experiment is not only able to describe fluid behavior but can forecast this behavior over time and space scales …

    usf Repository record for Impact of grain morphology on the temporal evolution of interfacial area during multi-phase flow in porous media (opens in a new tab)

  8. ROLE OF THE INTERFACE IN THE KINETICS AND MECHANISM OF SOLVENT EXTRACTION SYSTEMS (DITHIZONE, OXINE, INTERFACIAL AREA, DISPERSION).

    … allowed the determination of the quantity of interfacial area as a function of stir rate. The effect of interfacial area on the rate of extraction of five different chelating agents with various divalent metal ions was determined in this study. The role of the interfacial area in extraction …

    arizona-thes Repository record for ROLE OF THE INTERFACE IN THE KINETICS AND MECHANISM OF SOLVENT EXTRACTION SYSTEMS (DITHIZONE, OXINE, INTERFACIAL AREA, DISPERSION). (opens in a new tab)

  9. Hysteresis and dynamic effects in the relationship between capillary pressure, saturation, and air-water interfacial area in porous media.

    Air-water interfacial areas (A) were measured for multiple drainages (primary, secondary, and scanning) using a newly developed method, along hysteretic Pc-S curves representing natural drying/wetting processes. The measurement was conducted under a condition with relatively constant interfacial …

    oklahoma-thes Repository record for Hysteresis and dynamic effects in the relationship between capillary pressure, saturation, and air-water interfacial area in porous media. (opens in a new tab)

  10. Pore-Scale Modeling of the Surface Roughness Effect on Fluid-Fluid Interfacial Area for Contaminant Transport in Vadose Zone

    … solid surfaces inside natural porous media. Interfacial area between the immiscible fluids could be greatly affected by grain surface roughness, in which the adsorbed wetting-fluid films serve as the critical intermediary. It has been demonstrated that the configuration of wetting films is a …

    arizona-thes Repository record for Pore-Scale Modeling of the Surface Roughness Effect on Fluid-Fluid Interfacial Area for Contaminant Transport in Vadose Zone (opens in a new tab)

  11. Sensitivity of the Two-Fluid Model to Constitutive Correlations for Large Diameter Pipes

    … the sensitivity of the void fraction and interfacial area concentration predictions to changes in correlations used to calculate three parameters that are used to complete the interfacial drag calculation. The three parameters evaluated were drift-flux, void fraction covariance, and …

    must-thes Repository record for Sensitivity of the Two-Fluid Model to Constitutive Correlations for Large Diameter Pipes (opens in a new tab)

  12. Characterizing Non-Wetting Fluid in Natural Porous Media Using Synchrotron X-Ray Microtomography

    … of fluid distribution, morphology, and interfacial area. Column-flooding experiments were conducted with four enhanced-solubilization (ES) solutions to examine their impact on entrapped organic liquid. Mobilization caused a change in organic-liquid morphology and distribution for most …

    arizona-thes Repository record for Characterizing Non-Wetting Fluid in Natural Porous Media Using Synchrotron X-Ray Microtomography (opens in a new tab)

  13. Measuring Air-Water Interfacial Areas: Contributions of Capillary and Film Domains in Natural Porous Media

    … porous media is recognized to influence interfacial retention of organic and inorganic contaminants, and mediate various mass-transfer processes. The formation and presence of water films commonly solvating the surfaces of soil/sediment grains in unsaturated systems, as well as their …

    arizona-thes Repository record for Measuring Air-Water Interfacial Areas: Contributions of Capillary and Film Domains in Natural Porous Media (opens in a new tab)

  14. Application of penetration theory to mass transfer on a sieve tray

    … was to determine meaningful values of interfacial area and contact time for mass transfer on a sieve-tray. These values were determined by measuring the rates of absorption of carbon dioxide into aqueous solutions and forcing the parameters to give answers consistent with the rates of …

    vt Repository record for Application of penetration theory to mass transfer on a sieve tray (opens in a new tab)

  15. The role of the interface in the kinetics and mechanism of liquid-liquid extraction.

    … phase and vigorously stirred to generate a large interfacial area, a reversible decrease in the organic phase concentration of the complex was observed. The magnitude of this decrease varied with interfacial area, solvent, temperature, and the nature and concentration of the complex. Analysis of …

    arizona-thes Repository record for The role of the interface in the kinetics and mechanism of liquid-liquid extraction. (opens in a new tab)

  16. Improved closure relations for the two fluid-model in flashing flows

    … terms, which in turn are a function of the interfacial area concentration and the driving flux. Hence, it is important that the closure models for the interfacial area concentration and the driving fluxes are validated and benchmarked extensively for a wide range of flow conditions. …

    uiuc Repository record for Improved closure relations for the two fluid-model in flashing flows (opens in a new tab)

  17. Mass transfer characteristics of a tower filled with random and structured packings from an air stripper study of the removal of volatile organic compounds from groundwater

    … In the second part of the study, the gas-liquid interfacial area was determined for the KOCH/Sulzer type BX packing; the experimental portion of these studies was conducted in a 0.1 m ID tower where CO<sub>2</sub> was absorbed into NaOH solutions. With the knowledge of the interfacial area, an …

    utk-theses Repository record for Mass transfer characteristics of a tower filled with random and structured packings from an air stripper study of the removal of volatile organic compounds from groundwater (opens in a new tab)

Page 1 of 13