Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 31 for “"interfacial bond strength"”.
-
Development of Intertwined Infills to Improve Multi-Material Interfacial Bond Strength
… parts. One major concern of MMAM is the strength at the interface between materials. Based on the observation of how nature puts materials together, this research develops an initial hypothesis that if the materials are overlapped and interlaced with each other, the interface bonding …
-
Characterization of Interfacial Bond Strength in Fiber Reinforced Cementitious Composites by a Modified Pullout Method
… out to propose a new method for quantifying the interfacial bond strength in fiber reinforced cementitious composites. A modified pullout test has been designed to determine the interfacial bond parameters for natural fibers with cementitious system, and were repeated for artificial fibers for …
-
Interfacial bond strength of fabric reinforced cementitious matrix : effect of substrate properties and fibre-mortar ratio
… (FRCM) is a relatively new material used for strengthening applications of reinforced concrete structures. Several studies reported in the literature have indicated that the bond between FRCM layers and the concrete substrate is one of the main factors that affect the performance of the …
-
Bonding between the concrete and Fiber Reinforced Plastic, FRP, rods
The bonding between the Fiber Reinforced Plastic (FRP) rods and concrete is one important factor that determines the performance of FRP reinforced concrete structure. The objective of this study is to measure the interfacial bond strength and to understand the factors that influence this. Two types …
-
Hydroxyl Surface Functionalization of Thin-film Yttrium for Applications with Reactive Materials
… for thin film-elastomer junction with high interfacial bond strength. Utilizing inherent hydroxyl (-OH) groups on the according thin film, surface treatments were completed to form interfacial silanol bonds that acted to imbue thin-film yttrium with reactive sites for urea and hindered urea …
-
Effects of environmental ageing parameters on interfacial bond properties of carbon fiber tow in epoxy resin: an experimental and numerical study
The effects of environment on the interfacial bond strength of carbon fiber tow embedded in epoxy resin are being studied through accelerated aging experiments and pull-out tests (PT). The goal is to examine the synergistic effects of hot, cold, wet, dry and stressed environment on interfacial bond …
-
Polymer impregnation and its effect on the rupture properties of leather
… polymer - leather interaction would increase strength. Surface properties of leather fibres were altered (using a hydrophobic agent based on a phosphate ester) to more closely match those of the polymer. This resulted in a more even distribution of polymer on the leather fibrils. Application …
-
Environmental Influence on the Bond Between a Polymer Concrete Overlay and an Aluminum Substrate
… purpose of this investigation is to evaluate the bond durability between the overlay and the aluminum substrate after conditioning specimens in various temperature and humidity conditions. The average critical strain energy release rate, Gcr, for each specimen was measured using a modified mixed …
-
Properties of Flax Fiber Reinforced Composites
… hydrophilic nature of flax fibers reduces the interfacial bond strength with polymer thermosets, limiting composite mechanical properties. Corn zein protein was selected as a natural bio-based coupling agent because of its combination of hydrophobic and hydrophilic properties. Zein was …
-
Local Displacements and Load Transfer of Shape Memory Alloys in Polymeric Matrices
Average interfacial bond strength between an embedded SMA and an epoxy matrix were measured using pullout tests. The effects of various mechanical and chemical surface treatments on the bond strengths were examined. In-situ out-of-plane displacements of two-way trained SMA wires in epoxy were …
-
Compatibility and durability of concrete-stone system: The desert masonry at Taliesin West
… directly into concrete without intermediary bonding agents. This study focuses on two primary components of the system—face stone and concrete—whose direct contact and exposure to environmental conditions make them critical to the system’s performance. Unlike conventional stone veneers that …
-
Temperature-dependent tensile and shear response of graphite/aluminum
… Compared with rather high longitudinal strength, very low transverse strength was obtained for the graphite/aluminum. The poor transverse strength is believed to be due to the low interfacial bond strength in this material. The strength decreases significantly with increasing …
-
Sensitivity studies on the shear lag parameter β using analytical and numerical techniques
The strength of fiber-reinforced composites is dependent on the strength of the fiber-matrix interface bond. Thermal, chemical, and other means have been used to modify the surface of fibers, resulting in increased fiber-matrix interface bond strength. However, researchers are still dependent on …
-
Synthesis And Characterization Of Lignin Nanoparticles For Potential Applications In Advanced Sustainable Materials
… nanoparticles which takes advantage of greater interfacial bond strength due to an increase in surface area to volume ratio. In this thesis, we are reporting a method for extracting a fraction of lignin which is soluble in acetone. By using this soluble fraction, we have fabricated and …
-
Interface characterization and modelling of cement composite systems.
… methods to quantitatively characterize interfacial microstructure; (ii) no simple and effective method of interfacial modification. A systematic electrical conductivity theory for the interface characterization of cement composites is proposed in this study. Based on the proposed theory, …
-
Nanofiber reinforcement of a geopolymer matrix for improved composite materials mechanical performance
… through the adjustments in the fiber/matrix interfacial strength and through the improvements in the inherent toughness of the constituent materials. This study investigates the potential to improve the inherent toughness of the geopolymer matrix material through the addition of nanofillers, …
-
Comparing Effects on Portland Cement Mortar Containing Micronized Rubber Powder (MRP) and Fine Ground Waste Tire Rubber Intended for Freeze-Thaw Durability
… surface area. The consensus of crumb rubber’s interfacial bond strength with cement paste is that it is minuscule compared the bond with natural ridged aggregates. If crumb rubber is considered as a non-bonding aggregate, then the surface area argument is not relevant to inhibit a type of crumb …
-
A Study of Glass Fibre Reinforced High Alumina Cement Composites
… system. Calculation of the theoretical tensile strength for different failure modes shows that there is considerable scope for improvement of the physical properties of GRC composites. On the other hand, analogous calculations applied to the various mechanisms available for absorbing energy in …
Page 1 of 2