Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 155 for “"interfacial bonding"”.

  1. Shotcrete-Substrate Interfacial Bonding Behaviours and Mechanisms

    … substrate properties and surface morphology on bonding are not fully understood, and the impact of bio-admixtures on interfacial bond strength requires further investigation. This thesis addresses these gaps to advance shotcrete application in practices. An experimental program, complemented by …

    unsw Repository record for Shotcrete-Substrate Interfacial Bonding Behaviours and Mechanisms (opens in a new tab)

  2. Interfacial Bonding Strength In Bilayer Tablets – Mechanism And Engineering

    … crack at the interface or even layer separation. Interfacial bonding strength (IBS) is the strength that bonds two layers at the interface. Understanding the mechanism of forming an adequate IBS is critical to the successful development of a bilayer tablet product. The first step is to establish a …

    umn Repository record for Interfacial Bonding Strength In Bilayer Tablets – Mechanism And Engineering (opens in a new tab)

  3. The Improvement of Interfacial Bonding, Weathering and Recycling of Wood Fibre Reinforced Polypropylene Composites

    … of fibre was carried out to improve the interfacial bonding. After treatment, fibre surface charge was found to increase, but single fibre tensile strength (TS) and Young's modulus were (YM) decreased. Alkali treatment reduced composite TS but increased YM. The effects of hemicellulose …

    waikato-masters Repository record for The Improvement of Interfacial Bonding, Weathering and Recycling of Wood Fibre Reinforced Polypropylene Composites (opens in a new tab) Download file for The Improvement of Interfacial Bonding, Weathering and Recycling of Wood Fibre Reinforced Polypropylene Composites (opens in a new tab)

  4. Effect of fiber surface treatment on interfacial bonding in UHMWPE Fiber – HDPE matrix composite

    … not bond well with the PE matrix and a very good interfacial bonding is essential to yield composites with good mechanical properties required for the identified applications. Hence, this study is focused on identifying the best surface treatment to maximize the bonding between a commercially …

    manitoba Repository record for Effect of fiber surface treatment on interfacial bonding in UHMWPE Fiber – HDPE matrix composite (opens in a new tab)

  5. Influence of Elastic Mismatch and Nature of Interfacial Bonding on Toughness of Particulate Composites

    … particulate composites where,</p> <p>i) the interfacial bonding strength between second phase and matrix was continuously varied (glass - partly oxidized Ni system) and</p> <p>ii) the presence and absence of elastic mismatch between second phase and matrix which gives rise to stress …

    mcmaster Repository record for Influence of Elastic Mismatch and Nature of Interfacial Bonding on Toughness of Particulate Composites (opens in a new tab)

  6. Interfacial bonding between thermoset and thermoplastic polyurethane reinforced textile grade carbon fiber: Structure property relationships

    <p>The research work focused on examining the interfacial adhesion of unsized, epoxy, and urethane-sized textile grade carbon fiber (TCF) reinforced in different classes of polyurethane (PU) thermoplastic (TPU) and thermoset (TSU) polyurethane (PU) through the structure-property relationship. The …

    utk-theses Repository record for Interfacial bonding between thermoset and thermoplastic polyurethane reinforced textile grade carbon fiber: Structure property relationships (opens in a new tab)

  7. Interfacial Bonding of Carbon/Geopolymer Composite: Insights into the Effect of Fiber Surface Modification and Geopolymer Water Content

    … This study aims to provide insights into the interfacial bonding between carbon fabric and geopolymer by exploring the effects of fiber surface modification with zinc oxide nanorods and variations in geopolymer water content. The zinc oxide nanorods coating was applied to the carbon fibers …

    cornell Repository record for Interfacial Bonding of Carbon/Geopolymer Composite: Insights into the Effect of Fiber Surface Modification and Geopolymer Water Content (opens in a new tab)

  8. Investigation of interfacial bonding in banana fiber-reinforced composites : ascribing global economic value to unique renewable resources in developing countries.

    … nature of these natural fibers causes poor interfacial bonding with the majority of thermoplastic polymers. As a result, the benefits of the increased composite stiffness and strength are greatly reduced. In order to increase this interfacial bonding, a variety of surface and chemical …

    baylor Repository record for Investigation of interfacial bonding in banana fiber-reinforced composites : ascribing global economic value to unique renewable resources in developing countries. (opens in a new tab)

  9. Characteristics of nano-modified cementitious composites incorporating basalt fiber pellets and polyvinyl alcohol fibers and their suitability for shear key joints

    … a filler in shear key bridge joints, the HPFRCC interfacial bonding capacity with CC under shear configurations, as well as its interaction with reinforcement steel rebars were experimentally and numerically studied. The results showed that nano-silica led to improved performance at early- and …

    manitoba Repository record for Characteristics of nano-modified cementitious composites incorporating basalt fiber pellets and polyvinyl alcohol fibers and their suitability for shear key joints (opens in a new tab)

  10. Investigation on fabrication, interface formation, and properties of hot-processed titanium-doped copper/diamond composites

    … However, their performance is limited by weak interfacial bonding, caused by the poor chemical affinity between copper and diamond and severe phonon scattering due to mismatched lattice vibrations. To address these challenges, interface engineering strategies such as pre-coating diamond …

    waikato-masters Repository record for Investigation on fabrication, interface formation, and properties of hot-processed titanium-doped copper/diamond composites (opens in a new tab) Download file for Investigation on fabrication, interface formation, and properties of hot-processed titanium-doped copper/diamond composites (opens in a new tab) Restricted access

  11. Process-structure-property-performance relationships and scalable repair strategies in additive friction stir deposition of high strength aluminum alloys.

    … material consolidation, characterize the repair interfacial integrity and overall bonding quality to determine optimal tool paths that promote enhanced metallurgical bonding at the groove repair interface. Chapter three quantified how heat input conditions and temperature profiles influence …

    baylor Repository record for Process-structure-property-performance relationships and scalable repair strategies in additive friction stir deposition of high strength aluminum alloys. (opens in a new tab) Embargoed until 2031-08-15

  12. A Study of chemical treatments and processing for banana fiber-reinforced LDPE composites.

    … an agricultural waste product. However, poor bonding between the hydrophilic fiber and a comparatively hydrophobic thermoplastic matrix, such as LDPE, have limited composite properties. This study looks at two known natural fiber treatments designed to promote interfacial bonding, peroxide and …

    baylor Repository record for A Study of chemical treatments and processing for banana fiber-reinforced LDPE composites. (opens in a new tab)

  13. Processing, Testing, And Characterization Of A Novel Continuous Fiber Thermoplastic Composite Filament For Extrusion Based Additive Manufacturing

    … influence of fiber treatments on fiber-matrix interfacial adhesion was also investigated. Various chemical and physical fiber treatment methods were applied on the polymer fiber to enhance the fiber and matrix interfacial bonding. In addition, a novel fiber pull-out test method was developed to …

    uab Repository record for Processing, Testing, And Characterization Of A Novel Continuous Fiber Thermoplastic Composite Filament For Extrusion Based Additive Manufacturing (opens in a new tab)

  14. Chemical coupling in wood-polymer composites

    … coupling plays an important role in improving interfacial bonding strength in wood-polymer composites. In this study, the effects of coupling agent type and structure, graft polymerization of coupling agents, interfacial wettability, coupling treatment and process, coupling agent distribution, …

    lsu-thes Repository record for Chemical coupling in wood-polymer composites (opens in a new tab)

  15. Hafnium alkylamides and alkoxide adsorption and reaction on hydrogen terminated silicon surfaces in a flow reactor

    … precursors to support experimental observations. Interfacial bonding and surface catalyzed reaction processes initiated by the adsorption of precursors were detected. For TDMAH and TEMAH, β-hydride elimination and insertion reactions were calculated to be not favorable thermodynamically at these …

    alabama Repository record for Hafnium alkylamides and alkoxide adsorption and reaction on hydrogen terminated silicon surfaces in a flow reactor (opens in a new tab)

  16. Cohesive Zone Modelling of Fiber–Matrix Interface in Composite Materials

    … interface properties are quantified through the Interfacial Shear Strength (IFSS) and fracture energy, both serving as key indicators of composite integrity. Effective interfacial bonding is therefore essential to the composite’s strength. Nanoscale fiber surface modifications provide a promising …

    embry-riddle Repository record for Cohesive Zone Modelling of Fiber–Matrix Interface in Composite Materials (opens in a new tab)

  17. First-Principles Study of Metal -Ceramic Interfaces

    … we find significant differences in both the interfacial bonding and the inherent electronic structures of the bulk ceramics, our calculations reveal a trend in Wad with respect to the summed surface energies of the interfaced materials (sigmaAl + sigmaceramic). Specifically, we find that …

    uiuc Repository record for First-Principles Study of Metal -Ceramic Interfaces (opens in a new tab)

  18. Carbon Nanotube (CNT) Metallic Composite with Focus on Processing and the Resultant Properties

    … of the intrinsically strong in-plane atomic SP2 bonding CNTs offer high young's modulus (1.0–1.8 TPa), high tensile strength (30–200 GPa) and high elongation at break (10–30%). The thermal conductivity of individual single-walled carbon nanotube (SWCNT) and multi-walled carbon nanotube (MWCNT) …

    ucf Repository record for Carbon Nanotube (CNT) Metallic Composite with Focus on Processing and the Resultant Properties (opens in a new tab)

  19. Evaluation of asphalt--aggregate bond and stripping potential

    … mechanisms of asphalt concrete is the de-bonding of asphalt from aggregate in the presence of moisture. This distress mechanism is also referred to as stripping. It is a very complex process of moisture damage that is caused by several factors, including the characteristics of asphalt …

    ttu Repository record for Evaluation of asphalt--aggregate bond and stripping potential (opens in a new tab)

  20. Experimental and Computational Micromechanical Investigations for Developing Mechanically Competent 3D Printable Nanocomposite Biomaterials

    … of nanoparticles and improved dispersion and interfacial bonding between matrix and nanoparticle, all of which are attributed to improving the mechanical behavior at the micron and sub-micron scales. The focus of the current thesis was to conduct experimental and computational micromechanical …

    waterloo Repository record for Experimental and Computational Micromechanical Investigations for Developing Mechanically Competent 3D Printable Nanocomposite Biomaterials (opens in a new tab)

Page 1 of 8