Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 53 for “"interfacial failure"”.
-
Interfacial failure mechanisms of pretensioned single fiber polymer composites
… pretension and fiber surface treatment on the interfacial failure process in single fiber glass/epoxy and carbon/epoxy composites. Single fiber/epoxy composite specimens were fabricated in a specialized fixture in which fiber tension could be monitored during the curing cycle. Different fiber …
-
Acoustic emission associated with interfacial failure of Cu-Ni layered composites
Thesis (M.S.)--Michigan State University. Department of Metallurgy, Mechanics, and Materials Science, 1986
-
Effect of weld schedule variation on the weldability and durability of AHSS spot weld joints
… of the spot weld specimens. The occurrence of interfacial failure was recorded for the differing weld processes. Several weld schedules were examined and used to produce shear lap spot weld joints, specifically varying the squeeze force and the average current. The weld force used to produce a …
-
Fracture analysis of carbon fiber/epoxy matrix interface through microbond and cruciform tests
… tests, used to characterize the normal and shear interfacial failure of a carbon fiber/epoxy matrix system. The first part of this study is devoted to the simulation of the microbond test, in which, a drop of epoxy deposited on a carbon fiber is subjected to a longitudinal load, which eventually …
-
Characterization and microstructure-based modeling of spot weld failure in hot stamped steel
… properties of the sheet metal as well as the failure behavior of the spot welds that are used for sheet metal assembly. Unlike many practical and numerical methods for quantitative and qualitative failure characterization of uniform sheet metals, spot weld failure analysis methods are …
-
Application of the double torsion specimen to the study of fracture in fibre reinforced plastics
… of the plies within the laminate. The actual failure process is often ignored in this type of analysis. Composite failure is the result of damage accumulation from a number of failure modes, in particular, fibre failure, matrix failure and failure of the interface between the fibres and …
-
Friction Bit Joining of Dissimilar Combinations of DP 980 Steel and AA 7075
… cycling between loads of 100 N and 750 N. The failure modes that joints could experience during testing include: head, nugget, material, or interfacial failure. All tested specimens in this research experienced interfacial failure. Welds were also created and examined under a microscope in …
-
Behavior and Flexure Analysis of Balsa Wood Core Sandwich Composites: Experimental, Analytical and Finite Element Approaches
… Test data on bending rigidity, critical interfacial failure (skin-to-core interface) and shear stress are collected and analyzed. The load-deflection curves plots up to the point of failure initiation are being studied. The effects of the span and the radius of the loading nose on the …
-
The Mechanical Characterization of Multi-Wall Carbon Nanotubes and Related Interfaces in Nanocomposites
… to study the MWNT/polymer (epoxy) interface. Interfacial failure was found to occur in a brittle fashion, in a manner consistent with the predictions of continuum fracture mechanics models. Although an improvement in the interfacial adhesion was observed upon sidewall fluorination of the MWNT …
-
Particulate composite material internal deformation measurements using x-ray microtomography and digital volume correlation
… study the internal deformations and evolution of failure in 3D, we use a model composite material (cylindrical 15 mm in height and 10 mm in diameter) with a series of different well-controlled microstructure configurations. A simple microstructure arrangement consisted of precisely positioned …
-
The Effects of Graphene Size and Morphology on Damping Properties of Polymer Nanocomposites
… with graphene inclusions by employing interfacial slippage mechanisms between filler and matrix. The damping improvement to the nanocomposite benefits from the large interfaces of the matrix-graphene or graphene layers between which frictional sliding occurs to dampen vibration. In …
-
Surface treatment of titanium alloys for adhesive bonding
… deals with theories of adhesion and locus of failure in metal-metal bonding. This indicates that interfacial failure is unlikely in properly formulated bonds. In the first part of the experimental work tensile testing in shear was used to examine the effect upon joint strength of various …
-
THE INTERACTIONS OF PRESSURE SENSITIVE ADHESIVE WITH PAPER SURFACES
… peel curve consisting of a rate-dependent interfacial domain and a rate independent failure domain. The force generated at the paper surface in peeling was analyzed; it was found to be proportional to the overall peel force. By varying peel rates, the two types of forces were shown to have …
-
Adhesion Strength Measurement of Multilayer Structures with Vertical Crack by Four Point Bending Test
… for testing other electronic packages for interfacial failure.
-
Lyocell Fiber-Reinforced Cellulose Ester Composites-Manufacturing Considerations and Properties
… absorption. However, SEM results revealed interfacial failure and extensive fiber pull out. Relatively larger fiber and matrix regions were present on the scale of 10<sup>-3</sup>m. Solution prepregging technique using methyl ethyl ketone (MEK) as a solvent for CAB and continuous fibers as …
-
Atomistic Calculations of Nanoscale Interface Behavior in FCC Metals
… potentials are used to study the fundamental failure processes that occur at a bicrystal interface in Cu and Al as a result of a mechanical deformation. There are four primary objectives to this dissertation. First, molecular statics calculations are used to determine the most appropriate …
-
Laser Directed Energy Deposition Repair of Laser Powder Bed Fusion Maraging Steel Components
… strength (UTS) = 1482.5 MPa) with consistent interfacial failure. Post-repair peak aging caused interfacial degradation (UTS = 679.80 MPa), attributed to wire electrical discharge machining (EDM) recast layer contamination and Ti-Al oxide inclusions at the interface; heat treatment …
-
Effect of network structure on lignin-derived polyurethane film properties
… Analysis (ESCA) revealed the formation of interfacial bonds on the surface of the cellulose acetate adherend. Furthermore, it was indicated that failure occurred well within the bulk of the cellulose acetate while interfacial failure was apparent for the cellulose tri-acetate model. While …
-
IGFEM-based reduced-order modeling and design of nonlinear composites
… work, a powerful nonlinear solver to model the failure of composite materials is developed using an Interface-enriched Generalized Finite Element Method (IGFEM). Cohesive interfacial failure and damage mechanisms in the constituents are the primary source of nonlinearity and the shape of …
Page 1 of 3