Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 51 for “"interfacial transition zone"”.
-
Interfacial transition zone composition and bonding in cementitious materials with asphalt-coated particles
… were carried out by principally studying the interfacial transition zone (ITZ) and the interfacial bond energies between asphalt (RAP) and cement paste. Studies of the ITZ were performed using Euclidean distance mapping and image analysis of compositional backscatter electron micrographs of …
-
The Effects of Air-Cooled Blast Furnace SLAG (ACBFS) Aggregate on the Chemistry of Pore Solution and the Interfacial Transition Zone
… in its pore solution. The properties of the interfacial transition zone (ITZ), i.e. the zone in the vicinity of the aggregate surface, depends on the property of the aggregate such as its porosity and texture. Therefore, it is expected that the properties of ITZ around the ACBFS particle, …
-
Evaluation of de-icer deterioration of concrete
… containing slag cement and 2). Effect of the Interfacial Transition Zone on Joint Deterioration of Concrete Pavements. In the first paper, an alternative test method was proposed to evaluate scaling resistance of concrete containing SCMs, which is believed to better represent the field …
-
Applications of Geopolymer in Civil Engineering: Feasibility Study of Loess Stabilization and Waste Concrete Recycling
… analysis on recycled concrete shows that the new interfacial transition zone (NITZ) plays a detrimental role to the performance of recycled aggregate concrete (RAC), and could even contribute more to the mechanical failure of RAC at the microscale than the old interfacial transition zone (OITZ). …
-
MULTISCALE MODELLING OF RESPONSE AND DAMAGE IN CONCRETE STRUCTURES
… of the mesoscale constituents such as mortar and Interfacial Transition Zone (ITZ) are conducted. As an alternative to experimental calibration, a numerical calibration framework is also introduced to couple the mesoscale NSC RVE response to macroscale Concrete Damaged Plasticity (CDP) model. …
-
Additively Constructed Concrete Culverts (ACC)
… ACC permanent formwork performance depends on interfacial transition zone behavior, influenced by roughness, timing, shrinkage, and fibers. Third, composite tests of printed shells with early cast-in-place concrete (4–6 hours) achieved flexure-controlled failure without delamination. Key …
-
Micromechanical modeling of concrete at early age
… is generalized to account for the effect of the interfacial transition zone properties on concrete creep. An effective computational platform was developed to evaluate operator expressions in order to obtain relaxation and creep functions numerically. Through numerical examples, it is shown that …
-
Micromechanical Modeling of Concrete at Early Age
… is generalized to account for the effect of the interfacial transition zone properties on concrete creep. An effective computational platform was developed to evaluate operator expressions in order to obtain relaxation and creep functions numerically. Through numerical examples, it is shown that …
-
Factors influencing horizontal cracking in continuously reinforced concrete pavements (CRCP).
… morphological characteristics of the interfacial transition zone (ITZ) and the observation of cracking using the environmental scanning electron microscope (ESEM) was done. Characterization of oxides using Fourier transform infrared spectroscopy (FTIR) and electron dispersive x-ray …
-
Assessing Drying Shrinkage Induced Deterioration of Concrete Stored at Distinct Exposure Conditions
… investigated for the association with pores and interfacial transition zone (ITZ) in concrete.
-
Composite cement systems for encapsulation of barium sulphate scale from oil industry and application as high density support matrix
… the microstructure by eliminating highly porous interfacial transition zone, resulting in the higher compressive strength and reasonable leaching rates of elements. Addition of quartz was found to be most effective to minimise the degradation caused by the high temperature environment, by …
-
Finite Element Model Evaluation using Factorial Design: Simulation of Chloride diffusion in 3D heterogeneous concrete
… a proper relation between aggregate content and Interfacial Transition Zone(ITZ) diffusivity. A resolution IV fractional factorial was designed for six factors of the transient model. The data shows that more gravel content increases the time for chloride ions to reach the chloride threshold. …
-
Investigation into improving PCC mix consistency and production rate by two-stage mixing
… cement hydration, concrete homogeneity, and the interfacial transition zone (ITZ) between aggregate and paste. This study deals the first stage of the two-stage mixing process, slurry mixing. The objectives are to determine the optimum mixing time and intensity based on the paste binder …
-
The study of advanced materials using neutrons
… reflectivity. More specifically, we examined the interfacial transition zone width of a small molecule liquid crystal/polymer interface as a function of increasing temperature. We found that the interface between a thin film (≈ 1000 Å thick) of the liquid crystal 4'-n-octyl-4-cyanobiphenyl (8CB) …
-
Detecting Load Induced Thermal Damage in Concrete
… characterisation of pore size distribution and interfacial transition zone porosity along with in-situ data relating to pore volume during fracture testing following conditioning. These observations provide new insight into macrostructural observations made on material strength and permeability …
-
Improving and Augmenting the Anm Model for Three-Dimensional Virtual Concrete
… is representative of microstructures such as the interfacial transition zone (ITZ) present in concrete. Studying such processes that depend on the Euclidian distance from the particle surface in three dimensions can be challenging. A new method for obtaining two dimensional slices of this model …
-
The development of a geopolymer binder from the interbasaltic laterites of Northern Ireland
… model showing presenting new information on the interfacial transition zone between relic metakaolin particles and the geopolymer matrix.<br/>
-
Early age delamination in concrete pavements made with gravel aggregates
… representation of the bond strength across the interfacial transition zone, a model of interfacial fracture energy between aggregate and mortar that represents the energy necessary to create a crack along the interface was formulated. This model built the connection between concrete properties …
-
Modeling and Simulation for Shape Memory Polymer Based Self-healing Syntactic Foam
… perceived as a three-phase composite with interfacial transition zone layer coated microballoons dispersed in the SMP matrix based on the experimental observation, and later simplified into a two-phase composite by generalizing the interphase and pure SMP into an equivalent SMP matrix for …
-
Plastic Shrinkage of High-Performance Fiber-Reinforced Cement-Based Composites (HPFRCC)
… the size of large pores around the fibre-matrix interfacial transition zone, thereby impacting the capillary pressure, evaporation, porosity, and the bond between fibres and the matrix at an early age. Additionally, fibres create pathways for water exchange between capillary pores of varying …
Page 1 of 3