Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 14 of 14 for “"interference drag"”.
-
Interference Drag Due to Engine Nacelle Location for a Single-Aisle, Transonic Aircraft
… of generating a surrogate model of the interference drag between nacelles and wing-fuselage systems suitable for the inclusion in a multidisciplinary design optimization (MDO) framework. The target aircraft was a single-aisle, transonic aircraft with a freestream Mach number of 0.8 at …
-
Numerical Prediction of the Interference Drag of a Streamlined Strut Intersecting a Surface in Transonic Flow
In transonic flow, the aerodynamic interference that occurs on a strut-braced wing airplane, pylons, and other applications is significant. The purpose of this work is to provide relationships to estimate the interference drag of wing-strut, wing-pylon, and wing-body arrangements. Those equations …
-
Propulsion/airframe Integration Study of an Ultra High Bypass Ratio Turbofan and a Slotted, Natural-Laminar-Flow Wing
… influence of propulsion/airframe integration on interference drag. Four engine positions were investigated: trailing-edge/over-wing, leading-edge/over-wing, leading-edge/under-wing, and trailing-edge/under-wing. It was determined that leading-edge/over-wing and trailing-edge/under-wing mounted …
-
Assessment of RANS Turbulence Models for Strut-Wing Junctions
… SBW/TBW concept to achieve these reductions, the interference drag at the wing strut juncture must be small compared to other drag sources. Computational Fluid Dynamics (CFD) studies have concluded the interference drag is small enough for the TBW concept to be practical. However, the turbulence …
-
The Effect of Winglet Twist and Toe Angle on the Drag of a High Aspect Ratio Wing
… shown to significantly reduce the lift induced drag. Different parametric studies have identified important winglet characteristics, but none have examined effects on drag from varying winglet twist and toe angle. The purpose of this research report is to examine the drag reducing effect of …
-
Analysis of a semi-tailless aircraft design
… surface area, thereby reducing both friction and interference drag and manufacturing cost. The configuration should lend itself well to low-observability, making it a good stealth candidate. The P 208, provided the author an opportunity to analyze an unconventional configuration with the …
-
Biomechanics of rheotaxis in hill stream fish
… fins organized laterally into a frictional pad. Drag on fish is directly measured with strain gauges and used to calculate drag coefficients (0.10 - 0.94; Chapter II). Drag coefficients for low fineness ratio (length/height < 10) forms at Reynold's numbers below 10⁴ compare poorly with literature …
-
The investigation of the performance benefits of half delta strakes mounted on a Piper Navajo
… angle. These prototypes were designed to be interference drag reducing devices for the Piper Navajo twin-engine airplane and were flight tested for performance benefits. Both the 60 and 75-degree strakes tested during this study were mounted with an 18% overlap and 2°/4 gap. These design and …
-
Asymmetrical localised synthetic jets in three-dimensional flows over bluff and streamlined bodies
… fluid-structure interaction that produce drag were investigated: flow separation of the boundary layer and the wake region. A bluff body, an 80 mm side-supported sphere, was tested at a Reynolds number of 5 x 104 in a closed test section wind tunnel in the UNSW Aerodynamics Laboratory. …
-
Stall Control of a NACA0015 Aerofoil at Low Reynolds Numbers
… As a result of the roughness of the wing, the interference drag between the wing and the struts and the induced drag from wing tip vortices, the total drag coefficient values are higher than that of the aerofoil. When the boundary layer trips were added to the wing, the results showed that lift …
-
The Role of Constraints and Vehicle Concepts in Transport Design: A Comparison of Cantilever and Strut-Braced Wing Airplane Concepts
… intersection angle which would, in turn, reduce interference drag at that section. Due to the lack of available data on double deck fuselage aircraft, a detailed study of passenger and cargo layout was done. Optimized design showed that there was a small improvement in takeoff gross weight and …
-
Návrh nekonvenčního přechodu křídlo trup kluzáku a jeho vliv na výkony
Tato diplomová práce se zabývá problematikou zlepšování výkonů kluzáků snížením interferenčního odporu na přechodu křídlo trup. V práci jsou popsána současná aerodynamická a konstrukční řešení, ke kterým byly vytvořeny dva nové aerodynamické návrhy. Výsledky výpočtového modelování proudění byly …
-
Experimental and Numerical Investigation of NACA Airfoil Wing with Winglets
… aircraft for the purpose of reducing induced drag caused by wake vortices on the wingtip. A winglet device can save an aircraft anywhere from 3-7% in fuel consumption. Over the course of a year, this can add up to hundreds of thousands of dollars saved. This research consisted of two parts: …
-
Understanding Unsteady Corner Separation Within Wing-Body Junction Flows
Wing-body junction flows, formed at the interface between a wing and fuselage surface, are a complex, coupled, three-dimensional, turbulent flow field. This thesis focused on the unsteady corner separation that develops at the trailing edge of this wing-body junction under certain conditions. A …