Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 56 for “"intergranular corrosion"”.
-
Intergranular Corrosion and Stress Corrosion Cracking of Extruded AA6005A
A research program focused on understanding the intergranular corrosion (IGC) and stress corrosion cracking (SCC) behavior of AA6005A aluminum extrusions is presented in this dissertation. The relationship between IGC and SCC susceptibility and the mechanisms of SCC in AA6005A extrusions were …
-
Rapid method for determining the susceptibility of stainless steel to intergranular corrosion
Electronic Thesis or Dissertation
-
Effect of columbium additions in austenitic stainless steel castings to inhibit intergranular corrosion, The
Includes bibliographical references.
-
Pitting corrosion and intergranular corrosion of Al and Al-Cu alloy single crystals and bicrystals
… and bicrystals have been used to study pitting corrosion and intergranular corrosion of Al and Al-Cu alloys in 0.5M NaCl solution. The critical pitting potential and pit density were examined as a function of a number of factors. These included crystallographic orientation; the bulk solution …
-
Friction stir processing for the reversal and mitigation of sensitisation and intergranular corrosion in aluminium alloy 5083-H321
… used in ship hull superstructures as it has a corrosion resistance which affords an excellent degree of protection in chloride-rich marine environments. Corrosion performance can degrade in a process called sensitisation, due to the precipitation of a β-phase onto grain boundaries with exposure …
-
Experimental and modeling studies of formation of self-organized porous anodic oxide layers and intergranular corrosion of steel
… <p>In the second part, early stage corrosion damage preceding intergranular stress corrosion cracking (IGSCC) on high strength X70 pipeline steels was studied. In high-pH solution (pH 8 - 10.5), pipeline steels are susceptible to both intergranular cracking (IGC) and IGSCC in the …
-
THE EFFECT OF HYDROGEN COMBUSTION ON AUSTENITIC STAINLESS STEEL
… cycles within the C30 exhibited signs of intergranular corrosion. The intergranular corrosion was assessed to contribute to the number of hydrogen trapping sites that promoted HTHA. A fuel injector that was operated using methane was evaluated for comparison and it was found to have no …
-
EFFECT OF DEVELOPMENT OF SCANDIUM TRIALUMINIDE PRECIPITATES ON CORROSION AND MECHANICAL BEHAVIOR IN ALUMINUM-MAGNESIUM ALLOYS
… however issues with strain formability and corrosion hinder the development of these alloys. The addition of Sc for developing Al3Sc precipitates provides considerable precipitation strengthening as well as grain refinement characteristics that can help mitigate these issues. Alloys with …
-
Effect of Alloying Additions and Heat Treatment on Localized Corrosion Susceptibilities of AA7xxx Alloys Grain Refined with Al-5Ti-1B Master Aloy
… additions and heat treatment on the localized corrosion mechanisms of AA7xxx alloys that have been grain refined with an Al-5Ti-1B master alloy. The major alloying elements, Zn (3.5 – 6.5 wt. %), Mg (1.5 – 2.5 wt.%), Cu (0 – 3 wt. %), and Ti (0.04 – 0.25 wt.%), were varied and ten AA7xxx …
-
THE ROLE OF STRESS IN THE CORROSION CRACKING OF ALUMINUM ALLOYS
… the rate of sensitization, the rate of pitting corrosion and the rate of crack nucleation of aluminum alloy 5083-H116 aluminum. Stress corrosion cracking in aluminum superstructures of Naval vessels is a multibillion-dollar maintenance problem, which requires more scientific understanding to …
-
Metallurgical Evaluation of Cast Duplex Stainless Steels and Their Weldments
… due to their enhanced pitting and stress corrosion cracking resistance. They exhibit improved corrosion performance over the austenitic stainless steels. Duplex stainless steels also offer improved strength properties and are available in various wrought and cast forms.</p> <p>Selected …
-
Improved process procedures for upgrading and repair of high alloy and stainless castings
… and the Ni-base alloy, CW-6MC, in regard to corrosion response and weldability characteristics. Wrought counterpart materials, 254 SMO@reg;, AL-6XN®, Alloy 20® and Inconel Alloy 625®, were also included for comparison. The data base developed is significant and the conclusions reflect a …
-
The effect of applied tensile stress on localized corrosion in sensitized AA5083
… changes in the type and degree of localized corrosion for sensitized AA5083 under an applied tensile stress. AA5083 is an aluminum-magnesium alloy that experiences severe intergranular corrosion and intergranular stress corrosion cracking if sensitized. In this research, AA5083-H116 plates …
-
Localized Corrosion Behaviour of Cu-lean AA 7003 Extrusions
… relationships involved with the intergranular corrosion and exfoliation corrosion of Cu-lean AA7003 alloy extrusions, as a function of the heat-treated condition. The heat treatments of interest in this study include the naturally-aged T4 condition, representing the as-extruded …
-
The use of friction-surface processing as a method of corrosion protection of a friction-stir weld in the AL-LI-CU alloy AA2050-T851
… was explored as a possible method for mitigating corrosion of a friction-stir weld (FSW) in the Al-Li-Cu alloy AA2050-T851. The microstructure, hardness and corrosion behaviour of the base alloy, the FSW and the FSP regions was examined. The base alloy showed susceptibility to pitting parallel to …
-
Interfacial degradation mechanisms with applications to polymer-matrix composites and intergranular stress corrosion cracking of steels
… environment. The environmentally occurring corrosion process is mimicked by laboratory scale electrochemical experiments. Nanoindentation technique was utilized to locally characterize the mechanical property degradation in the sub-surface layer of a pipeline steel undergoing intergranular …
-
Corrosion of Austenitic Stainless Steel
This thesis work focuses on the corrosion behaviour of austenitic stainless steel welds in chloride containing environments. The initial aim was to develop a new method for corrosion testing of welded austenitic stainless steel. The motivation for such work was that previous results indicated that …
-
MICROSTRUCTURAL CHARACTERIZATION OF ULTRASONIC IMPACT TREATED AL-MG ALLOY
… high as-welded strength, is formable, and highly corrosion resistant, however, it can become sensitized when exposed to elevated temperatures for a prolonged time. Sensitization results in the formation of a continuous β phase at the grain boundaries that is anodic to the matrix. Thus the grain …
-
The effect of sensitization on the corrosion susceptibility and tensile properties of AA5083 aluminum
… strength, yield strength and susceptibility to intergranular corrosion (IGC). Test specimens were sensitized at various temperatures (80oC, 100oC, 175oC and 200oC) for up to 672 h (4 weeks). Microhardness measurements, tensile testing, scanning electron microscopy (SEM), energy dispersive X-ray …
-
Effect of stress on initiation and propagation of localized corrosion in alumninium alloys
… alloy AA2024 is susceptible to localized corrosion in the form of pitting and intergranular corrosion (IGC). The corrosion behaviour of this alloy is strongly influenced by the presence of different intermetallic particles. In this study, the effect of applied stress and the role of …
Page 1 of 3