Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 46 for “"interlayer bonding"”.
-
Evaluation of interlayer bonding in hot mix asphalt pavements
… (FWD) data for use in quantifying the level of interlayer bonding achieved in pavements. Data was obtained and used from the Federal Aviation Administration's (FAA) National Airport Pavement Test Facility located in Atlantic City, New Jersey. In this test facility, a section of the pavement had …
-
Effects of Cold Plasma Treatment on Interlayer Bonding Strength in Fused Filament Fabrication (FFF) Process
… layer deposition direction due to insufficient interlayer bonding. This research adopts the method of cold plasma treatment and investigates the potential enhancement of interlayer bonding by altering the printed surface prior to the deposition of the next layer. Polylactic acid (PLA) is used as …
-
Effect of Asphalt Pavement Compaction on Interlayer Bonding and Tensile Strength of Asphalt Concrete under Low Temperatures and Temperature Cycling
… temperature cycles and compaction equipment on interlayer bonds by using a custom-made temperature cycling testing machine that allows the reproduction of several temperature cycles over a relatively short time (7-10 days). The second phase (Test Series B) focused on resistance to tensile …
-
Improving the strength of fused filament fabrication parts by non-planar alignment of material extrusion wih stress vectors
… parts due to significant anisotropy and weak interlayer bonding. This thesis presents a novel approach to improve mechanical properties of FFF-produced parts through non-planar alignment of material extrusion with stress vectors. Research progresses from initial proof-of-concept studies to …
-
Study of Nozzle Design and Development of Reinforcing Mesh Approach for 3D Construction Printing
… important contributions to printed accuracy, interlayer bonding, and deformation resistance. Also, the key barriers faced in optimising nozzle-related parameters could be categorised into four aspects, namely: (i) technology, (ii) market, (iii) economic management, and (iv) social environment. …
-
Additive Manufacturing of Sustainable Thermoplastic Polymers, their Blends and Composites: Processing–Structure–Property Relationships and Applications
… and crystallization behavior, which control interlayer bonding, porosity, and anisotropy. This thesis investigates these effects by establishing processing–structure–property relationships in sustainable thermoplastic polymers, their blends, and composites. Recycled polyolefin blends …
-
Sustainable 3D printable concrete: a comprehensive study on nanoclay-modified mixtures incorporating seashells
… buildability, shrinkage, mechanical strength, interlayer bonding, microstructure, and durability. The main aim was to reduce the use of natural sand while maintaining the fresh and hardened properties required for extrusion-based printing.<br/><br/>A fractional factorial design was used to …
-
3D-Printing Material and Design Innovations for Energy-Efficient Buildings
… of the printed elements especially the interlayer bonding strength need to be assessed. Moreover, the influence of digital fabrication in achieving sustainability needs to be measured. This study analyses the effects of various supplementary cementitious materials (SCMs) on the …
-
Thermal history correlation with mechanical properties for polymer selective laser sintering (SLS)
… the high dependence of tensile strength on interlayer bonding, which is generally assumed to be related to thermal conditions from layer to layer. Various thermal history analysis methods, for example: cold subregion temperature, average layer temperature, and outline average temperature, …
-
Experimental Investigation of Effect of Gravity on Properties of Parts Fabricated by Fused Deposition Modeling Additive Manufacturing
… imaging revealed voids, air gaps, and poor interlayer bonding in specimens at low gravity. These findings enhance the understanding of how gravity conditions impact FDM additive manufacturing.
-
Effect of iron filings on the compressive and interlayer shear strength of grout-based 3D printed materials
… of iron filings on the compressive strength and interlayer shear strength of grout-based 3D printed materials. Grout specimens containing 0%, 1.5%, and 3% iron filings were fabricated using both extrusion-based 3D printing and conventional casting and tested at 3, 7, and 28 days. The printed …
-
Image-Based Methods for Materials Characterization and Process Control in Polymer Additive Manufacturing
… challenges including part distortion and interlayer bonding. Realizing the full potential of LFAM requires overcoming limitations in materials characterization and process control. The presented work develops two image-driven solutions through interdisciplinary approaches. First, deep …
-
A hybrid additive and subtractive manufacturing approach for multi-material components
… overhanging geometry and on the strength of the interlayer bonding is investigated. This evaluation provides the baseline needed to evaluate the strength of the material transition. A mechanically interlocking root structure is developed to join regions of dissimilar materials into a single …
-
Parametric Optimization and Performance of Additively Manufactured Refractory and Shock Sensitive Alloys
… shown to enhance quality of builds and improve interlayer bonding.
-
Additive Manufacturing of Multifunctional Materials and Composites
… infiltration and compression to improve interlayer bonding"-- Abstract, p. iii
-
Post Deposition Processing of Additive Friction Stir Deposited Aluminum A206 and Aluminum 7020 Without Graphite
… owing to overaging effects and potential interlayer bonding issues.
-
Fabrication of Nonplanar Surfaces Via 5-Axis 3D Printing
… the major drawbacks of these parts is the weak interlayer bonding within parts which are susceptible to failure under high loads. Similarly, the stair stepping effect compromises the surface finish of a part. This is prominently seen when the angle of inclination is less than 30 degrees. …
-
Microstructural characterization of a 4043 Al alloy produced by molten metal deposition (MMD)
… and Fe-rich intermetallic compounds (IMCs). Interlayer junction width was sensitive to build height and processing conditions, reflecting the roles of wetting, spreading and prior-layer remelting. In contrast, grain structure and IMC characteristics remained relatively uniform across the …
-
Minimizing the impact of filament quality on FDM parts using feed forward control
… These fluctuations can lead to poor inter-layer bonding and internal voids, both of which reduce mechanical performance. This research presents a Feed Forward (FFC) Control system developed to minimize the effect of filament dimensional variability on print quality. The system employs dual …
Page 1 of 3