Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 157 for “"intermetallic phases"”.
-
Intermetallic phases formed during galfanizing
… with Galfan is to produce a coating which has no intermetallic phases in the coating but this condition is not always achieved. Though it is important, the nature of the intermetallic phases and the mechanisms of their formation and growth during Galfanizing are far from fully understood. The …
-
Rationalizing th structures of Zintl and polar intermetallic phases
<p>Zintl and polar intermetallic phases are compounds intermediate among classical metals, ionic crystals, and covalent crystals and they exhibit metallicity, ionicity, and covalency simultaneously. It is challenging to rationalize the structures of these phases because we cannot simplistically …
-
Precipitation of Intermetallic Phases from Rapidly Solidifying Aluminum Alloys
… the formation of metastable Fe-rich and Si-rich intermetallics in dilute aluminum alloys is still an unsolved mystery. Based on the equilibrium Al-Fe-Si phase diagram, in dilute aluminum alloys only one equilibrium intermetallic, namely Al<sub>13</sub>Fe<sub>4</sub>, is expected. It is known, …
-
X-Ray Studies Of Ordered Intermetallic Phases For Fuel Cell Applications
… the composition and structure of ordered intermetallic materials in bulk polycrystalline, single crystal and nanoscale forms as electrocatalysts for fuel cell applications. The major objective of this research project is to thoroughly understand the structure/composition/property/activity …
-
An investigation of aluminium intermetallic phases using 57Fe Mossbauer spectroscopy and complementary techniques.
Pure intermetallic compounds Al3Fe, AlmFe, AlxFe, ac-AlFeSi, and Al6(Fe,Mn) have been extracted from Bridgman grown model aluminium alloys by dissolving the aluminium matrix in butanol. The resultant transmission Mdssbauer spectra for each intermetallic compound were interpreted according to their …
-
Synthetic Investigations in Borates, Borate Germanates, Gallium Oxonitrides, and Intermetallic Phases at Extreme Conditions
Multianvil Hochdruck-/Hochtemperatur Untersuchungen an Seltenerd Boraten, Borat Germanaten, Gallium Oxonitriden und Intermetallischen Phasen. Im Speziellen werden die neuen Borate alpha-Nd2B4O9, beta-Nd(BO2)3, delta-La,Ce(BO2)3 und Pr4B10O21 vorgestellt. Die Erweiterung des Systems durch Germanium …
-
Effect of processing techniques on the secondary intermetallic phases and thermomechanical behaviour of 6xxx series aluminium
… that the presence of Fe introduces secondary intermetallic phases α-AlFeSi and β-AlFeSi. It is also known that introduction of 5:1 Al-Ti-B type grain refiner encourages the formation of β-AlFeSi, while the introduction of Zr encourages the formation of α-AlFeSi.</p> <p>The overall objective of …
-
Optimizing the effect of tramp elements on intermetallic phases in HPDC Al alloys – A thermodynamic approach
… to phase competition between π-AlFeMgSi and β phases. The potential evaporation of Mg was also found to shift phase equilibria, increasing the fraction of β phase, emphasising the need for accuracy control of alloy compositions. Microstructure analysis, employing SEM and EDS on the cast alloys, …
-
Characterization and Modeling of Intermetallic Phases Formed During Soldering of Sn-Pb-Ag Alloy on Copper Substrates
In solder-copper diffusion couples an intermetallic compound layer forms when tin in the solder alloy reacts with the copper substrate. During reflow soldering, the intermetallic compound may also dissolve from the layer into the molten solder. Experimental studies using 62% tin-36% lead-2% silver …
-
Characterization of Major Intermetallic Phases in solidified Al-xSi-yFe-zSr (x=2 to 12.5 wt%, y=0 to 0.5 wt% and z=0 and 0.02 wt%) alloys.
… for more than a century. Iron containing intermetallic phases that evolve during the solidification of these alloys play a major role in the resultant mechanical properties and performance of the cast products. Changes in alloy composition and casting parameters significantly alter the …
-
Predicting heat capacity and experimental investigations in the Al-Fe and Al-Fe-Si systems as part of the CALPHAD-type assessment of the Al-Fe-Mg-Si system
… used to assess thermophysical properties of the intermetallic phases eta (Fe2Al5), epsilon~(Fe5Al8) and tau4 (FeAl3Si2). The heat capacity of the intermetallic phases zeta, eta, theta and epsilon of the Al-Fe system and of tau4 of the Al-Fe-Si system was measured using DSC. For the phases zeta, …
-
The development of qualification standards for cast duplex stainless steel
… (Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels) were the specifications utilized in conducting this work. An ASTM E562 industry round robin, ASTM A923 applicability study, ASTM A923 industry round robin, and an ASTM A923 …
-
Laser Surface Treatment for Targeted Strengthening of Metallic Multilayer Thin Films
… film thickness on the surface strengthening. Intermetallic phase precipitation was shown to be a dominant mechanism for laser-induced strengthening of the Ti/Ni multilayer. Therefore, Cu/Al, a material with a plethora of potential intermetallic phases, was treated with nano- and picosecond …
-
Castable Aluminum Alloys containing Nickel and Iron with High Electrical and Thermal Conductivity
… of a pure Al matrix with Al3Ni and Al6Fe intermetallic phases. The cast parts also demonstrated moderate microhardness and high electrical and thermal conductivity. The Al-Fe-Mg-Si multicomponent alloys contained additional intermetallic phases including branched α-AlFeSi, rounded Al9FeNi, …
-
Discovering Intermetallics through Synthesis, Computation, and Data-Driven Analysis
Intermetallics adopt an array of crystal structures, boast diverse chemical compositions, and possess exotic physical properties that have led to a wide range of applications from the biomedical to aerospace industries. Despite a long history of intermetallic synthesis and crystal structure …
-
Microstructural Characterization of Al-Fe Intermetallics in Aluminum Alloy 7xxx during Controlled Solidification
… the microstructural evolution of any Al-Fe intermetallic phases with respect to cooling rate during solidification for a range of AA 7xxx series alloy compositions. Fe was added at three different levels in a total of nine alloy composition developed from a Taguchi experimental matrix based …
Page 1 of 8