Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 60 for “"ion beam sputtering"”.

  1. Thermoelectric properties of Si/SiC thin-film superlattices grown by ion beam sputtering

    … superlattice thermoelectric devices could revolutionize traditional heat-to-work systems and heat-only processes if they are coupled to the systems to recycle a fraction of the waste heat into usable power. The advantage of thermoelectrics over traditional mechanical systems is that they use …

    colostate Repository record for Thermoelectric properties of Si/SiC thin-film superlattices grown by ion beam sputtering (opens in a new tab)

  2. ELECTRICAL AND OPTICAL PROPERTIES OF "DIAMONDLIKE" CARBON FILMS (SILICON SUBSTRATES, ION BEAM SPUTTERING, RF GLOW DISCHARGE)

    … on single crystal silicon substrates using ion beam sputtering, rf glow discharge in methane and dc sputtering of a graphite target in an Ar ambient. Electrical and optical properties of these films have been studied. The interfacial electrical properties have been evaluated using MIS …

    nebraska Repository record for ELECTRICAL AND OPTICAL PROPERTIES OF "DIAMONDLIKE" CARBON FILMS (SILICON SUBSTRATES, ION BEAM SPUTTERING, RF GLOW DISCHARGE) (opens in a new tab)

  3. Microstructural and optical properties of metal oxide optical coatings deposited by ion beam sputtering and their application in UV spectral range /

    … of the thesis was to extend the applicability of ion beam sputtered optical coatings for UV spectral range laser applications by optimizing plasma treatment of optical substrates, sputtering of material mixtures and post-deposition treatment of deposited coatings. Dissertation consists of …

    vilnius Repository record for Microstructural and optical properties of metal oxide optical coatings deposited by ion beam sputtering and their application in UV spectral range / (opens in a new tab)

  4. Optimization of intrinsic stress in sio₂ thin films deposited by dual ion beam sputtering and its impact on multilayer high-reflectance coatings /

    This master’s thesis investigates the optimization of intrinsic stress in SiO₂ thin films deposited by Dual Ion Beam Sputtering and evaluates its influence on multilayer high-reflectivity optical coatings. Residual mechanical stress is a major challenge in ion beam sputtered optical coatings …

    vilnius Repository record for Optimization of intrinsic stress in sio₂ thin films deposited by dual ion beam sputtering and its impact on multilayer high-reflectance coatings / (opens in a new tab)

  5. The Effect of Atomic Oxygen on the Formation of Indium Tin Oxide in Thin Films

    … by heating the substrate to 300 C during deposition excluding plastics to be used as a substrate material. This thesis reports on an investigation whether or not dual ion beam sputtering can be used to create high quality ITO lms at room temperature. The e ect of exposing the sample to an atomic …

    texas-state Repository record for The Effect of Atomic Oxygen on the Formation of Indium Tin Oxide in Thin Films (opens in a new tab)

  6. Stress in ion-beam assisted silicon dioxide and tantalum pentoxide thin films

    … thin films, deposited at room temperature by ion-beam sputtering (IBS) and dual ion-beam sputtering (DIBS), and Si02 films, deposited by reactive e-beam evaporation and ion-assisted deposition, were studied. The energy (150-600 eV) and ion-to-atom arrival ratio (0.27-2.0) of assisting argon …

    salford Download PDF for Stress in ion-beam assisted silicon dioxide and tantalum pentoxide thin films (opens in a new tab)

  7. Characterization of scandium oxide thin films for use in interference coatings for high-power lasers operating in the near-infrared

    … scandium oxide (scandia), deposited using dual ion beam sputtering, as a high-index material for interference coatings to be implemented in high-power lasers. Ion beam sputtered scandia coatings have the potential to allow for the power scaling of high-power lasers operating in the …

    colostate Repository record for Characterization of scandium oxide thin films for use in interference coatings for high-power lasers operating in the near-infrared (opens in a new tab)

  8. Microcharacterisation of bulk, ion beam processed and nanoparticle cadmium sulphide (CdS)

    … and optoelectronic material with applications in light-emitting diodes, lasers, flat panel displays, etc. Bulk CdS crystals at three different orientations were modified using a Ga+ focused ion beam (FIB). The effects of this modification were investigated using Atomic Force Microscopy …

    unsw Repository record for Microcharacterisation of bulk, ion beam processed and nanoparticle cadmium sulphide (CdS) (opens in a new tab)

  9. Investigation of the laser cleaning process for ibs grids in optical coating technology /

    … describes the process of laser cleaning of an Ion-Beam Sputtering (IBS) grid and magnetron sputtering (MS) substrates shutter as an alternative to manual cleaning and sandblasting in terms of the surface morphology, roughness and speed. It has been demonstrated that processing with a nanosecond …

    vilnius Repository record for Investigation of the laser cleaning process for ibs grids in optical coating technology / (opens in a new tab)

  10. Magneto-optical Kerr effect studies of magnetic micro-structures produced using SIMPA

    Using the focused ion beam sputtering capabilities of Scanning Ion Microscope with Polarization Analysis (SIMPA), arrays of regular shaped particles with sizes in the order of 10$\mu$m are produced from a 35nm thick $\rm Ni\sb{83}Fe\sb{17}$ film with in-plane uniaxial anisotropy, The aspect ratio …

    rice Repository record for Magneto-optical Kerr effect studies of magnetic micro-structures produced using SIMPA (opens in a new tab)

  11. Daugiasluoksnių titano ir silicio oksidų dangų nusodintų jonapluoščio dulkinimo technologija optinių charakteristikų tyrimas /

    … and silicon oxide structures, deposited by ion beam sputtering Vaida Grašytė This work aimed to determine the parameters for which titania monolayers have the best optical and physical properties and to study the properties of multilayer titania/silica coating. Tasks: A) Determine the …

    vilnius Repository record for Daugiasluoksnių titano ir silicio oksidų dangų nusodintų jonapluoščio dulkinimo technologija optinių charakteristikų tyrimas / (opens in a new tab)

  12. Synthesis and characterization of boron incorporated diamond-like carbon thin films

    … structures and properties. Boron (B) incorporation is very promising to modify DLC properties for electronic and mechanical applications. However, the current techniques suffer from their limitations and it’s difficult to use them to prepare high quality B incorporated DLC (B-DLC) films to meet …

    sask Repository record for Synthesis and characterization of boron incorporated diamond-like carbon thin films (opens in a new tab)

  13. Evolution of patterned and unpatterned surfaces during high temperature annealing and plasma etching

    … to probe spontaneous and directed surface evolution during annealing and plasma etching of three materials of high technological interest: silicon, nanoporous silica and photoresist. Vicinal Si(111) surfaces provide a source of steps whose configuration we control via the introduction of a …

    maryland Repository record for Evolution of patterned and unpatterned surfaces during high temperature annealing and plasma etching (opens in a new tab)

  14. A carbon nanotube pillar array ionizer for miniature ion thruster applications

    … class and smaller require scalable propulsion systems that minimize mass, volume and power. With a substantial reduction in ionizer size, ion thrusters may fulfill all of these requirements. This work explores field ionization with nanotube arrays for a highly-scalable ionizer. Fabrication …

    nps Repository record for A carbon nanotube pillar array ionizer for miniature ion thruster applications (opens in a new tab)

  15. Sugerties nuostolių jonapluoščio dulkinimo technologija suformuotose Ta₂O₅/SiO₂ oksidų daugiasluoksnėse optinėse dangose tyrimas UV spektriniame ruože /

    … Ta₂O₅/SiO₂ oxide optical coatings deposited by ion beam sputtering for the 355 nm ultraviolet spectral range. Nine single-layer coatings were produced by changing the target position, oxygen flow, and Ta₂O₅/SiO₂ fraction. Reflectance and transmittance spectra were used to determine the …

    vilnius Repository record for Sugerties nuostolių jonapluoščio dulkinimo technologija suformuotose Ta₂O₅/SiO₂ oksidų daugiasluoksnėse optinėse dangose tyrimas UV spektriniame ruože / (opens in a new tab)

  16. Jonapluoščio dulkinimo technologija suformuotų metalų oksidų mišinių plonų sluoksnių įtempių ir optinių savybių tyrimas /

    … Metal oxides mixtures could be possible solution for stress supression, since in this case new material is created with different refractive index and stress properties. Stresses within deposited thin films could also be modified by anealing process. Al2O3-SiO2 mixture with small fraction of …

    vilnius Repository record for Jonapluoščio dulkinimo technologija suformuotų metalų oksidų mišinių plonų sluoksnių įtempių ir optinių savybių tyrimas / (opens in a new tab)

Page 1 of 3