Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"isothermal solidification"”.

  1. Quantifying Isothermal Solidification Kinetics during Transient Liquid Phase Bonding using Differential Scanning Calorimetry

    … measurement techniques for quantifying isothermal solidification kinetics during transient liquid phase (TLP) bonding in binary and ternary systems; and resulting uncertainty in the accuracy of analytical and numerical models has been addressed by the development of a new technique using …

    waterloo Repository record for Quantifying Isothermal Solidification Kinetics during Transient Liquid Phase Bonding using Differential Scanning Calorimetry (opens in a new tab)

  2. Analyses of isothermal solidification kinetics during transient liquid phase bonding of silver with aluminium and copper filler metals

    … bonding time and temperature, on the kinetics of isothermal solidification during TLP bonding. The TLP bonding experiments are carried out in a vacuum furnace under a vacuum pressure of 5 x 10-5 torr at temperatures of 790°C, 820°C, and 850°C. The results show that a deviation from the parabolic …

    manitoba Repository record for Analyses of isothermal solidification kinetics during transient liquid phase bonding of silver with aluminium and copper filler metals (opens in a new tab)

  3. Transient liquid phase bonding of nickel superalloys and stainless steels : modeling and experimental investigations

    … modeling approach was used to predict the isothermal solidification times during the Transient Liquid Phase (TLP) Bonding of nickel superalloys, Inconel 718 and 625, and stainless steels, 410 and 321, with nickel based filler alloy, BNi-2. Unlike conventional modeling, the diffusion of …

    concordia Download PDF for Transient liquid phase bonding of nickel superalloys and stainless steels : modeling and experimental investigations (opens in a new tab)

  4. Influence of base alloy composition on processing time during transient liquid phase bonding of nickel-base superalloys

    … on the time required to achieve complete isothermal solidification (tf) during TLP bonding of three Ni-base superalloys was performed. Alloys IN 738, DS Rene80 and DS IC 6 show similar behaviour when bonded at 1100 oC, with comparable tf. However, at higher temperatures, IN 738 requires …

    manitoba Repository record for Influence of base alloy composition on processing time during transient liquid phase bonding of nickel-base superalloys (opens in a new tab)

  5. Numerical simulation of transient liquid phase bonding with variable diffusion coefficient in planar, cylindrical and spherical systems

    … reveal key reasons for why the extent of isothermal solidification deviates from linear relationship with √t, i.e. deviation from parabolic behavior. The deviation occurs when the concentration dependency of D changes with time. In non-planar systems (cylindrical and spherical), however, …

    manitoba Repository record for Numerical simulation of transient liquid phase bonding with variable diffusion coefficient in planar, cylindrical and spherical systems (opens in a new tab)

  6. Effects of transient liquid phase bonding on corrosion performance of a single crystal aerospace superalloy

    … the presence of a centreline eutectic when isothermal solidification was not completed and the corrosion resistance increased with a decrease in this eutectic width. The use of a composite interlayer produces TLP joints with smaller eutectic size and results in complete isothermal …

    manitoba Repository record for Effects of transient liquid phase bonding on corrosion performance of a single crystal aerospace superalloy (opens in a new tab)

  7. Transient liquid phase bonding of aerospace single crystal Rene-N5 superalloy

    … of susceptibility of single crystal weld to solidification cracking, transient liquid phase (TLP) bonding has been developed as an attractive alternative method for the repair of these single crystal superalloys. In this research, the effect of process parameters on the joint microstructure …

    manitoba Repository record for Transient liquid phase bonding of aerospace single crystal Rene-N5 superalloy (opens in a new tab)

  8. Transient Liquid Phase bonding in the nickel base superalloy CM 247 LC

    … tests made it evident that completion of the isothermal solidification in a TLP bond joint does not guarantee satisfactory joint properties. Extensive precipitation of hard and brittle phases and chemical inhomogeneity in the joint microstructure warrants further postbond heat treatment. …

    ubc Repository record for Transient Liquid Phase bonding in the nickel base superalloy CM 247 LC (opens in a new tab) Download PDF for Transient Liquid Phase bonding in the nickel base superalloy CM 247 LC (opens in a new tab)

  9. Experimental and theoretical investigations of transient liquid phase bonding of nickel based materials

    … models to simulate base metal dissolution and isothermal solidification stages of the TLP bonding process. The experimental investigation was carried out by using standard metallographic technique to study the microstructure of bonded materials using optical and Scanning Electron Microscopes. …

    manitoba Repository record for Experimental and theoretical investigations of transient liquid phase bonding of nickel based materials (opens in a new tab)

  10. Analysis of concentration dependent interdiffusion coefficient during TLP bonding of copper with germanium powder

    … behavior is observed when the width of the isothermal solidification (ISW) is plotted against √t, which is in contrast to what is generally expected. To explain this deviation, a newly developed analytical method is used to calculate the concentration-dependent interdiffusion coefficient, …

    manitoba Repository record for Analysis of concentration dependent interdiffusion coefficient during TLP bonding of copper with germanium powder (opens in a new tab)

  11. Process Kinetics of Transient Liquid Phase

    … measurement techniques for quantifying the isothermal solidification process during transient liquid phase sintering (TLPS) in binary isomorphous systems such as Ni-Cu, and the resulting uncertainty regarding the solidification mechanism and its sensitivity to important process parameters, …

    waterloo Repository record for Process Kinetics of Transient Liquid Phase (opens in a new tab)

  12. Numerical Simulation and Experimental Study of Transient Liquid Phase Bonding of Single Crystal Superalloys

    … to develop an effective way to reduce the isothermal solidification time without sacrificing the single crystalline nature of the base materials. To achieve these objectives, a multi-scale numerical modeling approach, that involves the use of a 2-D fully implicit moving-mesh Finite Element …

    manitoba Repository record for Numerical Simulation and Experimental Study of Transient Liquid Phase Bonding of Single Crystal Superalloys (opens in a new tab)

  13. Numerical modelling of 2D and 3D migrations of non-planar liquid-solid interface during transient liquid phase (TLP) bonding

    … modelling to study the behavior and kinetics of isothermal solidification during TLP bonding that involve 2D and 3D liquid-solid interface migration. In addition to addressing the complexity of multi-dimensional liquid-solid interface migration, the theoretical model developed in this work …

    manitoba Repository record for Numerical modelling of 2D and 3D migrations of non-planar liquid-solid interface during transient liquid phase (TLP) bonding (opens in a new tab)

  14. A comparative study on the transient liquid phase bonding of gamma prime (γ’)-strengthened cobalt- and nickel-based superalloys

    … interlayer. The results show that the rate of isothermal solidification is faster in the Ni-based superalloy which can be due to the higher boron diffusivity in nickel than in cobalt. However, at higher temperatures, the diffusion-controlled bonding process is completed faster in the cobalt …

    manitoba Repository record for A comparative study on the transient liquid phase bonding of gamma prime (γ’)-strengthened cobalt- and nickel-based superalloys (opens in a new tab)

  15. Diffusion-induced liquid film migration in the aluminum-copper system

    … precipitates, the liquid phase undergoes an isothermal solidification. Three-dimensional reconstructions of LFM events were created using a combined SEM/microindenting/polishing method. The results indicate the difficulty in obtaining reasonable measurements of migration distances from …

    mcmaster Repository record for Diffusion-induced liquid film migration in the aluminum-copper system (opens in a new tab)

  16. Development of a Shifting Melting Point Ag-In Paste Via Transient Liquid Phase Sintering for High Temperature Environments

    … shifting melting temperature, which results from isothermal solidification during the TLPS process, this attach material can be processed at a relatively low temperature while being capable of sustaining much higher temperatures in use, limited only by its new melting point. In order to develop an …

    maryland Repository record for Development of a Shifting Melting Point Ag-In Paste Via Transient Liquid Phase Sintering for High Temperature Environments (opens in a new tab)

  17. Solidification mechanisms of a multi-principal-component alloy for filler applications

    … targeting appropriate phase selection, then solidification temperature range, and finally assessing filler-substrate interactions. Previous work has demonstrated the feasibility of an MPCA with the nominal composition Mn35Fe5Co20Ni20Cu20 as a filler for brazing Ni-base Alloy 600 at 1200°C. …

    colo-mines Repository record for Solidification mechanisms of a multi-principal-component alloy for filler applications (opens in a new tab)

  18. Transient Liquid Phase Bonding for High Temperature Interconnects

    … solder alloy and solidified by cooling. In TLPB, isothermal solidification occurs by the complete consumption of the low-melting temperature phase in the formation of IMC. Under the correct conditions, the resulting IMCs will exhibit a melting temperature greater than the initial processing …

    purdue-thes Repository record for Transient Liquid Phase Bonding for High Temperature Interconnects (opens in a new tab)

  19. Multiphase wide gap braze alloys for the repair of nickel-base superalloy turbine components: development and characterization

    … the required brazing temperature through isothermal spreadability experiments. Bend testing was performed on brazed joints to determine their mechanical properties and maximum angular deflection. The metallurgical driving factors, such as solidification behavior and compositional effects, …

    colo-mines Repository record for Multiphase wide gap braze alloys for the repair of nickel-base superalloy turbine components: development and characterization (opens in a new tab)

Page 1 of 2