Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"isotropic etching"”.

  1. Goblits To Omg: 3D Fabrication Techniques For An Opto-Mechanical Gyroscope

    … design constraints. Intensive studies of HNA isotropic etching of Si, and alternative masking schemes were undertaken to reduce anisotropy and roughness. Dopant Enhanced Oxidation schemes are discussed, and toroidal-lip silicon oxide devices for improved optical quality factor are fabricated. …

    cornell Repository record for Goblits To Omg: 3D Fabrication Techniques For An Opto-Mechanical Gyroscope (opens in a new tab)

  2. A silicon knife design and fabrication

    … combines IC processing, techniques including anisotropic and isotropic etching of silicon, plasma dry etching and chemical etching dry oxidation, and KOH etching.

    njit Repository record for A silicon knife design and fabrication (opens in a new tab)

  3. XeF2 gas phase micromachininig of silicon: modeling, equipment development and verification

    … setup, and overcome the problems related to wet etching, such as, stiction and etching slowdown due to bubble formation. A good alternative to wet etching would have been plasma etching, but fine tuning of the process parameters to achieve an effective control of the process, combined with the …

    concordia Download PDF for XeF2 gas phase micromachininig of silicon: modeling, equipment development and verification (opens in a new tab)

  4. Diagnostic Studies of Silicon and Silicon Dioxide Etching in Fluorine and Chlorine-Containing Inductively Coupled Plasmas

    Plasma etching processes are widely used to produce patterns in the fabrication of microelectronic devices. The recent development of micro-/nano- technologies for micro-electro-mechanical systems, as well as the reduction of critical dimensions in transistors towards 7 nm and below, has brought …

    houston Repository record for Diagnostic Studies of Silicon and Silicon Dioxide Etching in Fluorine and Chlorine-Containing Inductively Coupled Plasmas (opens in a new tab)

  5. MECHANISM RESEARCH AND SURFACE QUALITY OPTIMIZATION OF ROBOTIC BELT GRINDING INCONEL 718

    … strengthened layer are revealed. Finally, isotropic etching polishing (IEP) is utilized to simultaneously retain the strengthened layer and optimize the surface quality, thereby obtaining a high-quality grinding surface layer.

    nus Repository record for MECHANISM RESEARCH AND SURFACE QUALITY OPTIMIZATION OF ROBOTIC BELT GRINDING INCONEL 718 (opens in a new tab) Download file for MECHANISM RESEARCH AND SURFACE QUALITY OPTIMIZATION OF ROBOTIC BELT GRINDING INCONEL 718 (opens in a new tab)

  6. Silver (Ag) nanoparticle based masks for the development of antireflection subwavelength structures in GaAs and Si solar cells

    … grating structures developed using dry and isotropic etching of semiconductor substrates. Silver (Ag) thin films of different thicknesses are deposited on Silicon (Si) and Gallium Arsenide (GaAs) semiconductor substrates and annealed at different temperatures. Uniform nanoparticles with …

    edithcowan Repository record for Silver (Ag) nanoparticle based masks for the development of antireflection subwavelength structures in GaAs and Si solar cells (opens in a new tab)

  7. Microfabricated Shear -Sensitive Tactile Sensor: Development and Application

    … circuit (IC) and MEMS technologies. KOH etching is used to make the diaphragm. Low-temperature wafer bonding is used to seal the cavities. EPON su-8 is used to construct the mesa. Silicon isotropic etching is used to release PI/Al/PI leads to realize flexible package. An analytical model …

    uiuc Repository record for Microfabricated Shear -Sensitive Tactile Sensor: Development and Application (opens in a new tab)

  8. Fabrication Of Metallic Antenna Arrays Using Nanoimprint Lithography

    … regions, followed by an optional Reactive Ion Etching (RIE) step and the subsequent deposition of e.g. metal onto the exposed substrate area. However, non-vertical sidewalls of the features in the resist layer resulting from an imperfect hard mold, from reflow of the resist layer, or from …

    ucf Repository record for Fabrication Of Metallic Antenna Arrays Using Nanoimprint Lithography (opens in a new tab)

  9. Thin-film deposition using laser ablation : application to ferromagnetic shape-memory materials and methods for spatial shaping of laser beams

    … value, the substrate could be easily removed by isotropic etching with water, and signs of the phase transformation were observed at around −100 °C. Also films on silicon were highly ferromagnetic, and when deposited using the optimal parameters, the number density of droplets on their surface …

    aalto Repository record for Thin-film deposition using laser ablation : application to ferromagnetic shape-memory materials and methods for spatial shaping of laser beams (opens in a new tab)

  10. Cryogenic deep reactive ion etching of silicon micro and nanostructures

    … thesis focuses on cryogenic deep reactive ion etching (DRIE) and presents how it can be applied to the fabrication of silicon micro- and nanostructures that have applications in microfluidics and micromechanics. The cryogenic DRIE process relies on inductively coupled SF6/O2 plasma at …

    aalto Repository record for Cryogenic deep reactive ion etching of silicon micro and nanostructures (opens in a new tab)

  11. Nano-Processing with Gas Cluster Ion Beams

    … and subsequently, enhancement of the etching rate was observed as a consequence of the production of volatile materials. Reactive cluster ion etching could be applied for Si fine pattern etching, and it provided solutions for charging up, isotropic etching, microloading and radiation …

    kyoto Repository record for Nano-Processing with Gas Cluster Ion Beams (opens in a new tab)

  12. Optical interconnects for system in package by MEMS technology

    … the (100) monocrystalline silicon surface by anisotropic wet etching, surfactant added TMAH etching behavior was first investigated. Non-ionic surfactants NCW-601A, Triton X-100, NCW-1002 with both high concentration (25%) and low concentration (10%) TMAH solutions was extensively studied for …

    unsw Repository record for Optical interconnects for system in package by MEMS technology (opens in a new tab)

  13. Fabrication of Three-Dimensionally Independent Microchannels Using a Single Mask Aimed at On-Chip Microprocessor Cooling

    … and width of a channel that is produced after isotropic silicon etching. This fabrication process is tailored for microfluidic network design, but the capabilities of the process can be applied elsewhere. A characterization of an Alcatel DRIE tool is also presented in order to enhance RIE lag …

    vt Repository record for Fabrication of Three-Dimensionally Independent Microchannels Using a Single Mask Aimed at On-Chip Microprocessor Cooling (opens in a new tab)

  14. Nanomaterials characterization and bio-chemical sensing using microfabricated devices

    … microfluidic channel has been fabricated by isotropic etching of soda lime glass wafers and a subsequent wafer-bonding process. Experiments with microbeads and human leukemia HL60 cells and an analysis using a thin shell model indicate that biological cells can be focused using an AC voltage …

    texas Repository record for Nanomaterials characterization and bio-chemical sensing using microfabricated devices (opens in a new tab)