Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 209 for “"jet impingement"”.
-
Jet impingement on porous surfaces
… documenting the flow resulting from the normal impingement of planar and axisymmetric jets onto a porous surface. Six different porous surfaces with open area ratios of 23, 26, 31, 37, 44 and 54% (? = 0.23, 0.26, 0.31, 0.37, 0.44 and 0.54) were placed in low speed (usually 40m/s exit velocity) …
-
Flat Plate-Free Jet Impingement Studies
Made available in DSpace on 2014-12-09T18:12:23Z (GMT). No. of bitstreams: 1 6812127.pdf: 2401029 bytes, checksum: cf2a87216bd80e344ceacff1b11b1b0b (MD5) Previous issue date: 1968
-
Mechanistic Modeling of Jet Impingement Boiling
… and transition boiling under a planar water jet impinging on a flat horizontal copper surface. The maximum attained surface temperature is 560 C and the maximum wall heat flux is 5 MW/m2. The boiling curves under the impinging jet have been obtained for 0.6 and 0.7m/s jet velocity and 15 C of …
-
Numerical Simulations and Studies on Round Jet Impingement, Twin Jet Impingement and Helicopter Rotor Blades Ground Effect
… parts. The first part focused on single round jet impingement. The convention air jet impingement on ground surface was compared to air jet impingement on water surface in the range of Mach number from 0 to 0.3. Currently the studies on round jet impingement on water surface are very few. The …
-
Liquid jet impingement on a moving wall
This research studies the impingement of a free surface Newtonian liquid jet on a dry solid moving wall using theoretical, numerical and experimental methods. The study focus mainly on the parameter range of jet Reynolds numbers 100< Reⱼ <1000 and the wall-to-jet velocity ratios 0.04<uw/vⱼ <30, …
-
Advanced Jet Impingement Cooling for Power Electronics
Convective heat transfer by jet impingement cooling offers a suitable solution for high heat flux applications. Compared to techniques that rely on bulk conduction in series with convection, direct liquid impingement reduces the thermal resistance between power device hot spots and the coolant. …
-
Axisymmetric Jet Impingement onto a Heated Cylinder
… flow study, investigating the behaviour of a jet impinging onto a single heated cylinder. A number of experiments were conducted to investigate the behaviour of the jet flow under a variety of scenarios. The inlet Reynolds number and the heater power level were the primary variables considered …
-
A micro-machined micro-jet impingement cooling device
… flow and heat transfer in a MEMS-based on micro-jet impinging cooling device. This study attempts to correlate the results of numerical analyses with experimental results. The experimental performance of air impinging jet cooling was also compared with mist spray cooling. The numerical simulation …
-
Water jet impingement in run-out table cooling
cooling process on a run-out table is a critical step that governs the final microstructure and the mechanical properties of the produced steels. In this research, we use a more recent method for obtaining the thermal history on the plate surface, which is the infrared thermal imaging technique. …
-
Modelling of jet impingement and early roll forming
… study was to model the hydrodynamic details of jet impingement and drainage in the early part of roll forming in twin-wire paper machines. A theoretical approach based on computational fluid dynamics was chosen to model the free jet and impingement zone. For the first time, a two-dimensional, …
-
Computational Investigation of Supercritical CO2 Single-Jet Impingement
Supercritical carbon dioxide jet impingement cooling is a topic of great current importance. Despite its rich genealogy—being related as it is to decades of jet impingement research utilizing more available fluids such as air and water—it suffers from the dearth of literature that afflicts all new …
-
Hotspot Cooling Performance for Confined Jet Impingement Cooling
… can make this challenge even more difficult. Jet impingement cooling is one of the top candidates for removing such extreme heat fluxes in microelectronics. Jet impingement cooling can achieve heat transfer coefficients (HTCs) due to its normal incident flow-field and ability to thin the local …
-
Jet Impingement Heat Transfer from Superheated, Superhydrophobic Surfaces
Liquid jet impingement is a technique ubiquitously used to rapidly remove large amounts of heat from a surface. Several different regions of heat transfer spanning from forced convection to nucleate, transition, and film boiling can occur very near to one other both temporally and spatially in …
-
Jet to jet impingement in a confined space
… polymer parts. In this process, two or more jets produce impingement mixing of low viscosity monomers or oligomers in a mixhead. In order to better understand an impingement mixer, it is essential to understand the flow field created by the opposed laminar jets in a similar configuration. In …
-
Synthetic jet impingement heat transfer from a circular cylinder
… a dramatic rise in the research on synthetic jet (SJ) impingement cooling and heat transfer. This is primarily due to the many advantages of a SJ that include its low cost, simple structure, light weight, ease of installation and ability to be miniaturised using MEMs technology, making it a …
-
Flow characteristics of single and double liquid jet impingement
… have shifted the focus onto impinging liquid jets as an efficient, powerful cooling technique. Although much has been done on the thermal aspects of jet impingement, the available knowledge still lacks an in-depth understanding of the fluid dynamics involved in the phenomena that dictate the …
-
Particle-laden liquid jet impingement on a moving surface
… may be applied in the form of a particle-laden jet. The impingement of high-speed liquid jets on a moving surface was studied. The jet fluids were dilute suspensions of neutrally buoyant particles in water-glycerin solutions. At the low concentration studied, the suspension has a Newtonian fluid …
-
Jet impingement boiling heat transfer at low coiling temperatures
The production of advanced high strength steels (AHSS) for use in the automotive and construction industries requires complex control of runout table (ROT) cooling. Advanced high strength steels require coiling at temperatures below 500 °C in order to produce a complex multi-phase microstructure. …
-
Axisymmetric fluid jet impingement of a rock half-space
The effects of an axisymmetric fluid jet impinging on a rock half-space are examined. A recently developed constitutive model for porous elastic materials, which explicitly provides for the compressibilities of the solid grains and fluid that comprise the material, is reconciled to the model …
Page 1 of 11