Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 28 for “"jet test"”.

  1. The design and validation of an impinging jet test facility.

    An experimental jet impingement facility was constructed with the capability of conducting a detailed analysis of the local heat transfer coefficients beneath an array of large impinging jets. The facility was validated with initial heat transfer studies that determined an appropriate jet discharge …

    baylor Repository record for The design and validation of an impinging jet test facility. (opens in a new tab)

  2. Evaluation of the Jet Test Method for determining the erosional properties of Cohesive Soils; A Numerical Approach

    … especially for cohesive soils. The submerged jet test device is an in situ method of determining the critical shear stress and soil erodibility of cohesive soils. A constant velocity jet, applied perpendicular to the soil surface, creates a scour hole which is measured at discrete time …

    vt Repository record for Evaluation of the Jet Test Method for determining the erosional properties of Cohesive Soils; A Numerical Approach (opens in a new tab)

  3. A Method for Performance Analysis of a Ramjet Engine in a Free-jet Test Facility and Analysis of Performance Uncertainty Contributors

    <p>Ramjet and scramjet engines are being developed to provide a more fuel efficient means of propulsion at high Mach numbers. Part of the development of these engines involves test and evaluation of an engine in ground facilities as well as in flight. Ground facilities, like Arnold Engineering …

    ut-knoxville Repository record for A Method for Performance Analysis of a Ramjet Engine in a Free-jet Test Facility and Analysis of Performance Uncertainty Contributors (opens in a new tab)

  4. Comparing In Situ Submerged Jet Test Device and Laboratory Flume Methods to Estimate Erosional Properties of Cohesive Soils for Bank Stability Models

    … obtained using the in situ submerged jet test device (SJT) were measured against results from the closed-loop laboratory flume method for 12 cohesive bank sites. Additionally, SJT critical shear stress values were compared to values found via empirical relationships found in literature …

    ut-knoxville Repository record for Comparing In Situ Submerged Jet Test Device and Laboratory Flume Methods to Estimate Erosional Properties of Cohesive Soils for Bank Stability Models (opens in a new tab)

  5. Streambank erosion assessment in non-cohesive channels using erosion pins and submerged jet testing, Dallas/Fort Worth, Texas.

    … of this research was to determine if a submerged jet test could be used to predict the erodibility of non-cohesive streambank materials. The study area was the Dallas-Fort Worth Metroplex located within the Blackland Prairie, Texas. Streambank erosion rates were monitored for an eight month period …

    baylor Repository record for Streambank erosion assessment in non-cohesive channels using erosion pins and submerged jet testing, Dallas/Fort Worth, Texas. (opens in a new tab)

  6. Modeling channel erosion in cohesive streams of the Blackland Prairie, Texas at the watershed scale.

    … was to assess the application of the submerged jet test to predict erosion of cohesive stream banks in the Blackland Prairie of North Central Texas, an area with over 40% of the State's population. In situ erosion monitoring was conducted by utilizing erosion pins and water level loggers at …

    baylor Repository record for Modeling channel erosion in cohesive streams of the Blackland Prairie, Texas at the watershed scale. (opens in a new tab)

  7. A sub-scale investigation of automobile drag and lift interference in a 3/4- open jet wind tunnel

    … as a result, are best understood for solid wall test sections. Unfortunately, solid wall wind tunnels devoted to full-scale automotive testing have to be very large (test section areas of approximately 500 ft<sup>2</sup> or larger) to hold the simulation error to correctable levels. For open jet …

    ut-knoxville Repository record for A sub-scale investigation of automobile drag and lift interference in a 3/4- open jet wind tunnel (opens in a new tab)

  8. Effects of fuel additives on plume opacity of a sub-scale turbojet test cell with a ramjet type dump-combustor

    … based fuel additives on smoke reduction in turbo-jet test cells. Experiments were conducted on a one-eighth scale turbojet test cell with a ramjet type dump-combustor. Measurements of particle sizes and concentrations were made using light transmittance at two wavelengths. Particulate samples were …

    nps Repository record for Effects of fuel additives on plume opacity of a sub-scale turbojet test cell with a ramjet type dump-combustor (opens in a new tab)

  9. Evaluation of an In Situ Measurement Technique for Streambank Critical Shear Stress and Soil Erodibility

    The multiangle submerged jet test device (JTD) provides a simple in situ method of measuring streambank critical shear stress (Ï c) and soil erodibility (kd). Previous research showed streambank kd and Ï c can vary by up to four orders of magnitude at a single site; therefore, it is essential to …

    vt Repository record for Evaluation of an In Situ Measurement Technique for Streambank Critical Shear Stress and Soil Erodibility (opens in a new tab)

  10. Infrared imaging: a proposed validation technique for computational fluid dynamics codes used in STOVL applications

    … flow fields. Specifically, a heated, free-jet test facility was constructed. The gaseous flow field of the jet exhaust was characterized using an infrared imaging technique in the 2 to 5.6μm wavelength band as well as conventional pitot tube and thermocouple methods. These infrared images …

    vt Repository record for Infrared imaging: a proposed validation technique for computational fluid dynamics codes used in STOVL applications (opens in a new tab)

  11. Influences Of Gas Thermodynamic Properties On Jets In Hypersonic Cross Flow

    … sensitivity of the large-scale flow features of jets inhypersonic cross flow for a range of gasses, Mach numbers, and stagnation temperatures. A gas heating system was devised to vary jet stagnation temperature and deliver quasi-steady jet conditions throughout the test duration to explore …

    washington Repository record for Influences Of Gas Thermodynamic Properties On Jets In Hypersonic Cross Flow (opens in a new tab)

  12. The Design, Fabrication, and Evaluation of a Low-Speed, Low-Turbulence, Anechoic Wind Tunnel

    In order to provide a means for testing noise reduction techniques in propellers and fans, a low-speed, low-turbulence, anechoic wind tunnel was designed, fabricated and evaluated at Embry-Riddle Aeronautical University. This open circuit wind tunnel was designed using several other existing wind …

    embry-riddle Repository record for The Design, Fabrication, and Evaluation of a Low-Speed, Low-Turbulence, Anechoic Wind Tunnel (opens in a new tab)

  13. Development of a subsonic free-jet nozzle for inlet-engine integration ground test facilities

    … Development Center (AEDC) offers a unique test capability for the evaluation of inlet-engine compatibility. The capability features a variable-attitude and variable-Mach number free-jet nozzle that subjects an aircraft propulsion system to a flow field approximating the flight environment. …

    ut-knoxville Repository record for Development of a subsonic free-jet nozzle for inlet-engine integration ground test facilities (opens in a new tab)

  14. Development of the tolerant wind tunnel for bluff body testing

    … conventional wind tunnels the solid-wall or open-jet test section imposes on the flow field around the test model new boundary conditions absent in free air. Unless a small model is used, the solid-wall test section generally increases the loadings on the model while the open-jet boundary …

    ubc Repository record for Development of the tolerant wind tunnel for bluff body testing (opens in a new tab) Download PDF for Development of the tolerant wind tunnel for bluff body testing (opens in a new tab)

  15. Time Development of Scour in Clayey Soils by Submerged Vertical Circular Turbulent Impinging Jets

    … is typically measured, and of the available tests, the Jet Erosion Test, developed by Hanson and Cook (2004), is a widely-used in-situ technique. The test employs a submerged circular impinging jet to create scour in the soil, and the development of the scour hole with time is measured. The …

    sask Repository record for Time Development of Scour in Clayey Soils by Submerged Vertical Circular Turbulent Impinging Jets (opens in a new tab)

  16. Development of a Wind Turbine Test Rig and Rotor for Trailing Edge Flap Investigation

    … blade structure. An instrumented wind turbine test rig and rotor were developed to enable a wide-range of experimental set-ups for such investigations. The capability of the developed system was demonstrated through a study of the effect of stationary trailing edge flaps on blade load and …

    waterloo Repository record for Development of a Wind Turbine Test Rig and Rotor for Trailing Edge Flap Investigation (opens in a new tab)

  17. Unstructured grid technologies for hydrodynamic applications with bodies in relative motion and mesh deformation

    … and validated by solutions of several synthetic jet test cases from a NASA Langley Workshop. Application to the free surface flow over the S175 container ship undergoing two-node harmonic bending is also demonstrated. The resulting viscous mesh shows good quality throughout the harmonic …

    utc Repository record for Unstructured grid technologies for hydrodynamic applications with bodies in relative motion and mesh deformation (opens in a new tab)

  18. Improving Stream Bank Erosion Estimates by Adjusting the Applied Shear Stress for Different Bank Characteristics

    … middle, and upper portion of the banks. A mini-jet test device was used to approximate k<sub>d </sub>and the τ<sub>c</sub> using the Blaisdell method (BM). Flows and stage heights were modeled with HEC-RAS to determine the τ at each pin. Pin erosion averages varied by category and bank position …

    ut-knoxville Repository record for Improving Stream Bank Erosion Estimates by Adjusting the Applied Shear Stress for Different Bank Characteristics (opens in a new tab)

  19. Changes in Streambank Erodibility and Critical Shear Stress Due to Surface Subaerial Processes

    … monthly in situ using a multi-angle submerged jet test device. Environmental and soil data were also collected directly at the streambank surface to determine freeze-thaw cycles, soil moisture, soil temperature, bulk density, soil erodibility, critical shear stress, and other atmospheric …

    vt Repository record for Changes in Streambank Erodibility and Critical Shear Stress Due to Surface Subaerial Processes (opens in a new tab)

  20. Assessing The Erodibility of Cohesive Media in Southwestern Ontario With In-Situ Mini-JET Methodology

    … cohesive boundaries. The development of the mini-Jet Erosion Test (JET) methodology has facilitated in-situ data collection of the resistance of cohesive media to erosion, however, it has not been widely applied in Ontario and there remain knowledge gaps in the interpretation of the test results. …

    waterloo Repository record for Assessing The Erodibility of Cohesive Media in Southwestern Ontario With In-Situ Mini-JET Methodology (opens in a new tab)

Page 1 of 2