Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 129 for “"junction temperature"”.

  1. On-line Junction Temperature Estimation of SiC Power MOSFETs

    L'abstract è presente nell'allegato / the abstract is in the attachment

    poli-torino Repository record for On-line Junction Temperature Estimation of SiC Power MOSFETs (opens in a new tab)

  2. The Study of the Forward-Voltage to Junction-Temperature Coefficient Degradation in Light-Emitting Diodes

    … of a LED are heavily dependent on the junction temperature of the LED. Thermal management for LEDs has become an important field study for LEDs. Unfortunately, as the LEDs grow smaller and more integrated, it becomes impossible at times to directly measure their junction temperature. …

    calpoly Repository record for The Study of the Forward-Voltage to Junction-Temperature Coefficient Degradation in Light-Emitting Diodes (opens in a new tab)

  3. Embedded active and passive methods to reduce the junction temperature of power and RF electronics

    … of such devices is strongly affected by the junction temperature where the highest magnitude occurs in a local region on the drain side edge of the gate called the hotspot. Thus, thermal management of these devices remains a major concern in the design and reliability of systems employing …

    gatech Repository record for Embedded active and passive methods to reduce the junction temperature of power and RF electronics (opens in a new tab)

  4. Junction Temperature Estimation of Silicon Carbide Power Module using Internal Gate Resistance as Temperature Sensitive Electrical Parameter

    The junction temperature of a power module is measured non-intrusively and uninterrupted in its application by analyzing the dependency of gate resistance to temperature. The circuit configuration proposed consists of altering the gate loop path and adding a basic peak detection circuit with an …

    arkansas Repository record for Junction Temperature Estimation of Silicon Carbide Power Module using Internal Gate Resistance as Temperature Sensitive Electrical Parameter (opens in a new tab)

  5. Active Thermal Control of Power Semiconductor for High Power Electric Drive Applications

    … badly exposing power emiconductors to larger temperature swings and thermal cyclic stress. The vulnerability of wire bonds and chip solder in the power semiconductor to failure due to thermal cycling necessitates a solution. This solution, actively controlling the junction temperature during …

    chalmers Repository record for Active Thermal Control of Power Semiconductor for High Power Electric Drive Applications (opens in a new tab)

  6. Thermal effects in high-power light-emitting diodes /

    … diodes (LEDs). The method of the measurement of junction temperature from the high-energy wing of the electroluminescence spectrum in AlGaInP and InGaN LEDs has been validated and compared to other methods. The dynamics of junction temperature under the pulse-width modulation and pulse-frequency …

    vilnius Repository record for Thermal effects in high-power light-emitting diodes / (opens in a new tab)

  7. Šiluminiai reiškiniai didelės galios šviestukuose /

    … diodes (LEDs). The method of the measurement of junction temperature from the high-energy wing of the electroluminescence spectrum in AlGaInP and InGaN LEDs has been validated and compared to other methods. The dynamics of junction temperature under the pulse-width modulation and pulse-frequency …

    vilnius Repository record for Šiluminiai reiškiniai didelės galios šviestukuose / (opens in a new tab)

  8. COMPREHENSIVE ELECTRICAL/OPTICAL/THERMAL CHARACTERIZATIONS OF HIGH POWER LIGHT EMITTING DIODES AND LASER DIODES

    … inverse approach, based on the transient junction temperature behavior, is proposed and implemented to quantify the resistance of the die-attach thermal interface (DTI) in high power LEDs. A hybrid analytical/numerical model is utilized to determine an approximate transient junction …

    maryland Repository record for COMPREHENSIVE ELECTRICAL/OPTICAL/THERMAL CHARACTERIZATIONS OF HIGH POWER LIGHT EMITTING DIODES AND LASER DIODES (opens in a new tab)

  9. TRANSIENT ELECTRO-THERMAL ANALYSIS OF TRACTION INVERTERS

    … is mainly determined by the maximum permissible junction temperature of the power devices. As the power density and switching frequency increase, transient electro-thermal models become more and more important for the thermal management system design of the power electronic converters. In …

    mcmaster Repository record for TRANSIENT ELECTRO-THERMAL ANALYSIS OF TRACTION INVERTERS (opens in a new tab)

  10. THERMAL MODELING AND CHARACTERIZATION OF HIGH POWER DEVICES

    An accurate prediction of the peak operating junction temperature in high-power electronic devices provides useful information on the reliability and lifetime of devices. An accurate closed-form analytical solution for calculating the junction temperature of a MMIC device is developed. Unlike most …

    nus Repository record for THERMAL MODELING AND CHARACTERIZATION OF HIGH POWER DEVICES (opens in a new tab) Download file for THERMAL MODELING AND CHARACTERIZATION OF HIGH POWER DEVICES (opens in a new tab)

  11. Development of Si Device Based Power Converters for High Temperature Operation in HEV Applications

    … and the guidelines on the development of a high temperature Si converter for operating with 105 ˚C high temperature liquid coolant in hybrid electrical vehicle (HEV) applications are provided.</p> <p>First, the characterization of a Si IGBT operating at 200 ˚C junction temperatures is presented. …

    utk-theses Repository record for Development of Si Device Based Power Converters for High Temperature Operation in HEV Applications (opens in a new tab)

  12. Investigation of liquid cooling on M9506A high density Keysight AXIE chassis

    … form factor while operating at an ambient air temperature of 50°C. Two liquid cooling technologies were analyzed in this effort and compared against current state-of-the-art air-cooled systems. A new configuration proposed using return jet impingement with dielectric fluid FC72 directly on the …

    colostate Repository record for Investigation of liquid cooling on M9506A high density Keysight AXIE chassis (opens in a new tab)

  13. HIGH EFFICIENCY BASE DRIVE DESIGNS FOR POWER CONVERTERS USING SILICON CARBIDE BIPOLAR JUNCTION TRANSISTORS

    … base driver designs for Silicon Carbide Bipolar Junction Transistors (SiC BJTs) and their applications for power converters. SiC is a wide bandgap semiconductor which has been the focus of recent researches as it has overcome the several of physical restrictions set by the silicon material. …

    whiterose Download PDF for HIGH EFFICIENCY BASE DRIVE DESIGNS FOR POWER CONVERTERS USING SILICON CARBIDE BIPOLAR JUNCTION TRANSISTORS (opens in a new tab)

  14. Single phase thermohydraulic performance analysis of microchannel flow geometry for direct chip cooling

    … microchannels can be implemented to regulate the junction temperature of silicon integrated circuits. An optimization is done to identify the channel configuration yielding the minimum pressure drop for a given heat load.

    rit Repository record for Single phase thermohydraulic performance analysis of microchannel flow geometry for direct chip cooling (opens in a new tab)

  15. Design and Development of High Density High Temperature Power Module with Cooling System

    … alternative that pushes the limitations of junction temperature, power rating, and switching frequency of Si devices. These advanced properties will lead converters to higher power density. However, the reliability of the SiC semiconductor is still under investigation, and at the same time, …

    vt Repository record for Design and Development of High Density High Temperature Power Module with Cooling System (opens in a new tab)

Page 1 of 7