Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 1167 for “"laboratory testing"”.

  1. Laboratory Testing for Chronic Lymphocytic Leukemia

    This thesis addresses two current issues in the laboratory diagnosis and understanding of chronic lymphocytic leukemia (CLL). Clinical laboratory testing by flow cytometry is critically important for the identification and characterization of CLL and other blood cancers. Flow cytometry …

    calgary Repository record for Laboratory Testing for Chronic Lymphocytic Leukemia (opens in a new tab)

  2. Laboratory testing and investigations of delayed ettringite formation

    … alkali-silica reaction. Significant accelerated laboratory testing was performed, and parallel exposure blocks were cast to evaluate realistic exposure conditions. The research included materials from throughout the state of Texas. The effects of material composition and dosage on DEF were …

    texas Repository record for Laboratory testing and investigations of delayed ettringite formation (opens in a new tab) Restricted access

  3. Cerchar abrasivity test – laboratory testing and numerical simulation

    … in rock engineering. Over the years, a number of testing methods have been developed to define and quantify the abrasive potential of rocks. Due to simple design and convenient handling, Cerchar abrasivity test and its index, Cerchar abrasivity index, are most commonly used to assess the rock …

    qucosa-diss

  4. Development and laboratory testing of Ultra High Performance Concrete

    … and non-proprietary UHPC mixtures in the laboratory, with the ultimate goal aimed at implementing UHPC in bridge applications in Texas, particularly for field-cast connections and closure pours.

    texas Repository record for Development and laboratory testing of Ultra High Performance Concrete (opens in a new tab)

  5. Benzene losses from aqueous solutions during geotechnical laboratory testing

    … of using volatile organics in geotechnical laboratory tests. Previous experiments with volatile organics such as benzene and trichloroethylene with soils had shown significant concentration losses during the tests. The purpose of the study was to identify the sources of loss and to quantify …

    njit Repository record for Benzene losses from aqueous solutions during geotechnical laboratory testing (opens in a new tab)

  6. Characterization of Rutting in Asphalt Pavements using Laboratory Testing

    … the rutting potential of asphalt mixes using laboratory testing. For this purpose, 49 different binder blends were prepared by mixing asphalt binders (PG 58-28, PG 64-22, PG 70-28, and PG 76-28) with different amounts of Polyphosphoric Acid (PPA - 0%, 0.5%, 1.0%, 1.5%, and 2.0%), Warm-Mix …

    oklahoma-thes Repository record for Characterization of Rutting in Asphalt Pavements using Laboratory Testing (opens in a new tab) Restricted access

  7. Factors Affecting Liquefaction Assessment of Granular Soils through Laboratory Testing

    … information available in each case. As a result, laboratory tests have continued to play a key role in determining how various factors influence liquefaction susceptibility and consequences. Eventually, a mechanics-based liquefaction assessment method which can differentiate among soils depending …

    toronto-retro Repository record for Factors Affecting Liquefaction Assessment of Granular Soils through Laboratory Testing (opens in a new tab)

  8. Laboratory testing of across the road laser speed measurement devices

    Thesis (M.S.)--Michigan State University. Department of Electrical Engineering, 1994

    msu Repository record for Laboratory testing of across the road laser speed measurement devices (opens in a new tab)

  9. Laboratory Testing to Evaluate the Effectiveness of Caprocks for CO2 Storage

    The increased anthropogenic emission of carbon dioxide (CO2) is a serious concern due to its effects on global climate change. Capture of CO2 from point sources and storage in the porous rocks of deep saline reservoirs is considered a practical choice for reducing CO2 emissions into the atmosphere. …

    sask Repository record for Laboratory Testing to Evaluate the Effectiveness of Caprocks for CO2 Storage (opens in a new tab)

  10. Run-Around Membrane Energy Exchanger Prototype 4 Design and Laboratory Testing

    … s/m, >82 kPa, and 387±32 MPa respectively. A laboratory model of RAMEE prototype 4 was constructed using the AY Tech. membrane. The effectiveness of the laboratory model was evaluated using the energy exchanger test facility. Airstream temperatures and relative humidity’s were measured at …

    sask Repository record for Run-Around Membrane Energy Exchanger Prototype 4 Design and Laboratory Testing (opens in a new tab)

  11. Laboratory Testing for Adfreeze Bond of Sand on Model Steel Piles

    … in 1996 and allowed preparing, freezing and testing the specimen in place. The material and soil tested for this study were provided by EXP Services Inc. The model pile, a galvanized HSS 114.3 x 8.6 section, is commonly used to install solar panels. Soil was taken from a future solar farm …

    ottawa-retro Repository record for Laboratory Testing for Adfreeze Bond of Sand on Model Steel Piles (opens in a new tab)

  12. Characterisation of Lightly Stabilised Granular Materials by Various Laboratory Testing Methods

    … with cement-flyash and slag-lime using various testing methods. The testing methods include flexural beam, indirect diametrical tensile (IDT), unconfined compression (UC) and accelerated model pavement (AMP). Two new/improved flexural beam testing setups (i.e., one for monotonic and the other …

    unsw Repository record for Characterisation of Lightly Stabilised Granular Materials by Various Laboratory Testing Methods (opens in a new tab)

  13. Stress-induced permeability evolution in coal: Laboratory testing and numerical simulations

    … gas storage. Therefore, this work presents laboratory tests and a coupled model using PFC3D and FLAC3D to simulate the stress induced permeability evolution in coal samples. Basic mechanical properties are determined via lab testing. The spatial distributions of different components inside …

    qucosa-diss

  14. Factors Affecting Strength Gain and Development of a Laboratory Testing Procedure

    … two different commercial laboratories performed laboratory tests on treated soil, and they produced strikingly different unconfined compression test results. Further, both sets of results are different from test results for similar soils available in the published literature. This situation …

    vt Repository record for Factors Affecting Strength Gain and Development of a Laboratory Testing Procedure (opens in a new tab)

  15. Performance Evaluation of Cold In-place Recycling Mixtures in Nevada: Laboratory Testing

    Cold In-place Recycling (CIR) consists of pulverizing and rebinding a portion of the existing asphalt concrete layer with asphalt emulsion and chemical additives without heating to produce a restored pavement layer. However, a severely damaged asphalt concrete mix presents a challenge for the …

    unr Repository record for Performance Evaluation of Cold In-place Recycling Mixtures in Nevada: Laboratory Testing (opens in a new tab)

  16. Enhanced Laboratory Testing and Characterization Related to the Mechanics of Anisotropic Rock

    … at greater depths, it is important to use testing methods measuring geomechanical properties with a high degree of accuracy and repeatability. Tensile strength is commonly measured via the indirect tensile strength test, intact elastic components and compressive strength are measured via …

    queens Repository record for Enhanced Laboratory Testing and Characterization Related to the Mechanics of Anisotropic Rock (opens in a new tab)

  17. Feasibility of Additive Manufactured Materials for Use in Geotechnical Laboratory Testing Applications

    … analogue soil sample can then be used in a laboratory setting. A preliminary investigation was carried out to identify the various AM technologies available and their associated materials. After examining the strength and stiffness characteristics of the various materials, two separate AM …

    arkansas Repository record for Feasibility of Additive Manufactured Materials for Use in Geotechnical Laboratory Testing Applications (opens in a new tab)

  18. Laboratory Testing and Modelling of High Head Photovoltaic Powered Water Pumping Systems

    … hydraulic output is achieved. Therefore, a laboratory based testing system for high head photovoltaic pumping system was developed. The laboratory testing system uses control valves to maintain a constant head height under variable irradiance incident on the photovoltaic array during a solar …

    unsw Repository record for Laboratory Testing and Modelling of High Head Photovoltaic Powered Water Pumping Systems (opens in a new tab)

Page 1 of 59