Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 63 for “"laminar flames"”.
-
A study of interactions between laminar flames and walls
… combustor was designed and optimized to support laminar, stable flame propagation at constant ambient pressure. Measurements of flame position and heat transfer during head-on quenching of premixed methane-air flames with varying mixture equivalence ratios at a metallic surface were made using …
-
Soot Formation in Non-premixed Laminar Flames at Subcritical and Supercritical Pressures
… study was conducted using axisymmetric co-flow laminar diffusion flames of methane-air, methane-oxygen and ethylene-air to examine the effect of pressure on soot formation and the structure of the temperature field. A liquid fuel burner was designed and built to observe the sooting behavior of …
-
Laser induced incandescence imaging for the investigation of soot formation in laminar flames
… for calibrating other measurements in different flames.From burner setup it is possible to change the boundary temperature of the flame. It was thought that by changing this temperature it would be possible to change the soot concentration within the flame. However, using LII imaging it was shown …
-
Variation of burning velocity of laminar flames with pressure by the burner-area method
… effect of pressure on the burning velocity of laminar flames a general study was undertaken at the California Institute of Technology Jet Propulsion Laboratory to determine the variation of burning velocity with pressure by the burner "area method. This report is a portion of that study. The …
-
Measurement of Markstein numbers and laminar flame speeds in computationally simulated premixed cylindrically expanding laminar flames
… combustion. Key combustion properties, such as laminar flame speed and Markstein number, play crucial roles in characterizing premixed flames. These parameters influence flame stability, speed, and response to perturbations. While these properties can be determined experimentally, such …
-
An experimental investigation of the recirculation zone of laminar flames stabilized on bluff bodies at low Reynolds numbers
… mixture ratio for small flame holder sizes, laminar flame stabilization studies v/ere made using cylindrical flame holders of 0. 031 to 0. 125 inches in diameter at Reynolds numbers 3 4 in the range of 10 to 10 . Chemical samples of the gases in the recirculation region behind the flame …
-
Effects of Fuel Unsaturation on Pollutant Emissions from the Laminar Flames of Prevaporized Petroleum and Biodiesel Blends in Air
… the NO emission index on a mass basis (EINO) in laminar flames of neat prevaporized fuels such as methyl oleate (MO), soy methyl ester (SME), canola methyl ester (CME), rapeseed methyl ester (RME), palm methyl ester (PME), heptane, toluene, diesel, JetA and petroleum/biodiesel blends at various …
-
A Method for Measurement of Spatially Resolved Radiation Intensity and Radiative Fraction of Laminar Flames of Gaseous and Solid Fuels
… and radiative fraction for axisymmetric laminar diffusion flames for both solid and gaseous fuels by using a modified DSL-R camera employed to collect monochromatic (900 nm) images and a Schmidt-Boelter heat flux gauge. The high spatial resolution provided by the images of the camera …
-
UNDERSTANDING THE ROLE OF HEAT RECIRCULATION IN ENHANCING THE SPEED OF PREMIXED LAMINAR FLAMES IN A PARALLEL PLATE MICRO-COMBUSTOR
… recirculation in enhancing the flame speeds of laminar flames stabilized in a parallel plate reactor by: 1) developing analytical models that account for conjugate heat transfer with the wall and 2) making measurements of temperature profiles in a simulated microcombustor using non-intrusive …
-
Effects of elliptical burner geometry on partially premixed gas jet flames in quiescent surroundings.
… range of equivalence ratios of 0.55 to 4.0, for laminar flames. (Abstract shortened by UMI.)
-
Computational and Experimental Study of Heat Release Rate Surrogates in Ammonia-Hydrogen Flames
… performance of four HRR surrogates for NH3/H2 flames: NH, NH2, O-atom, and H-atom. A good surrogate must have acceptable spatial and temporal correlations with the flame HRR, and this aspect was investigated first in the computational portion of this study. Cantera code was used to investigate …
-
Numerical Simulation of Flame-Vortex Interactions in Natural and Synthetic Gas Mixtures
The interactions between laminar premixed flames and counter-rotating vortex pairs in natural and synthetic gas mixtures have been computationally investigated through the use of Direct Numerical Simulations and parallel processing. Using a computational model for premixed combustion, laminar …
-
Laser Absorption Spectroscopy in Applications for Temperature, Concentration, and Spatial Recovery
… ranging from highly turbulent flows to steady laminar flames. The recovery of values such as pressure, temperature, and concentrations of absorbing media within a system is vital in any material or aerospace engineering capacity. The purpose of this work is to more fully and meaningfully …
-
Laser diagnostic investigation of the structure of steady and driven hydrogen jet diffusion flames
The structure of hydrogen jet diffusion flames has been investigated using coherent anti-Stokes Raman scattering (CARS) and laser-induced fluorescence (LIF) to obtain temperature and nitric oxide (NO) concentrations in steady laminar flames and during the interaction of induced fuel-side vortices …
-
Radical concentration and temperature measurements in sooting flames by cavity ring-down spectroscopy and laser-induced fluorescence
Sooting laminar flames at atmospheric pressure present a very complex chemical environment with numerous sources of interference for optical measurement techniques. Absolute concentration profiles of ¹CH? and HCO have been measured under a range of flame conditions in a sooting laminar premixed …
-
Flamelet modelling of soot formation in diffusion flames
… models have been applied to soot formation in laminar and turbulent diffusion flames. The aim was to study how different model parameters affect soot formation in diffusion flames. It was shown that certain assumptions are more crucial in laminar diffusion flames than in turbulent ones. The …
-
Soot Evolution in Acoustically Forced Laminar Non-premixed Jet Flames
… type of particulate matter that is emitted from flames and fires due to incomplete hydrocarbon combustion. Interest in soot study spans a diverse range of combustion systems from simple laminar jet flames on a stove, to large-scale boilers and furnaces and complex aircraft turbine operating under …
-
Part I: Application of the Radio-Frequency Furnace technique to environmental trace analysis. Part II: The applicability of Hadamard Transform techniques to UV-visible spectroscopy
… of sources, particularly lamps and premixed laminar flames, indicate that these are essentially white noise sources. A theoretical evaluation of the multiplex advantage obtainable in the UV-visible region was obtained and verified by means of computer simulation. Based upon these results, it …
-
The Effects of Compressibility on the Propagation of Premixed Deflagration
… waves. Due to the quasi-isobaric nature of slow flames, compressible effects in laminar flames are usually neglected. Nevertheless, turbulent deflagrations may propagate at substantially higher speeds, suggesting that compressible effects may play a role in their dynamics. In the present thesis, …
Page 1 of 4