Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 11 of 11 for “"laminate materials"”.

  1. An experimental and theoretical analysis of cold working and riveting in fiber metal laminate materials

    … OF COLD WORKING AND RIVETING IN FIBER METAL LAMINATE MATERIALSByDavid S. BackmanThis research describes the results of an investigation into the behaviour of fiber metal laminate (FML) materials after cold expansion and riveting, using both experimental and theoretical methods with an overall …

    msu Repository record for An experimental and theoretical analysis of cold working and riveting in fiber metal laminate materials (opens in a new tab)

  2. Assessing Composite and Fibre Metal Laminate Materials for Automotive Applications Through Impact and Quasi-Static Indentation Testing

    … with the use of composite and fibre metal laminate (FML) materials. An important safety equivalency characteristic of these lightweight materials that must be studied is their impact resistance compared to that of traditionally used automotive materials; steel and aluminum. Low-velocity …

    carleton Repository record for Assessing Composite and Fibre Metal Laminate Materials for Automotive Applications Through Impact and Quasi-Static Indentation Testing (opens in a new tab)

  3. Identification of Delamination Defects in CFRP Materials through Lamb Wave Responses

    … largely undetectable form of damage in composite laminate materials. This thesis will develop a method to more easily detect delamination damage within composite materials. Using finite element analysis modeling and lab testing, a new method from interpreting the results obtained from existing …

    ndsu Repository record for Identification of Delamination Defects in CFRP Materials through Lamb Wave Responses (opens in a new tab)

  4. Characterization of FR-4 Printed Circuit Board Laminates Before and After Exposure to Lead-free Soldering Conditions

    … The knowledge of possible variations in the PCB laminate material properties due to the soldering conditions is an essential input in the selection of appropriate laminates. An experimental study was conducted to investigate the effects of lead-free processing on key thermomechanical, physical, …

    maryland Repository record for Characterization of FR-4 Printed Circuit Board Laminates Before and After Exposure to Lead-free Soldering Conditions (opens in a new tab)

  5. Crack Tip Micromaching by Femtosecond Laser for Fracture Testing of Metal Laminates

    … ablation on the mechanical properties of metal laminates followed by FEA simulation to elucidate future experimental potential. The metals investigated are copper, niobium, and copper/niobium accumulative roll bonded (ARB) laminates. The two laminate materials in this study have a nominal layer …

    unm Repository record for Crack Tip Micromaching by Femtosecond Laser for Fracture Testing of Metal Laminates (opens in a new tab)

  6. A wideband aperture-coupled microstrip array for an automotive radar sensor

    … set for these products. Traditional PTFE laminate materials have excellent electrical properties of low dielectric loss tangents, but the material and fabricating costs for these circuits are relatively expensive, and were not deemed acceptable for a viable automotive radar program. The …

    manitoba Repository record for A wideband aperture-coupled microstrip array for an automotive radar sensor (opens in a new tab)

  7. A numerical investigation of the crashworthiness of a composite glider cockpit

    … Two more variants constructed only of fibre-laminate materials were modelled for comparison. Energy absorption and specific energy absorption were analysed over the first 515 mm of crushing. Simulation results indicate that the existing JS1 cockpit is able to absorb energy through progressive …

    nwu-za Repository record for A numerical investigation of the crashworthiness of a composite glider cockpit (opens in a new tab)

  8. Investigation of Adhesive and Electrical Performance of Waterborne Epoxies for Interlayer Dielectric Material

    … upon the completion of drying. The copper foil/laminate interface was evaluated by a 90° peel test as part of two different studies: an analysis of the viscoelastic response of the interface during peel and a study of the thermal durability of the copper/laminate interfacial peel strength. The …

    vt Repository record for Investigation of Adhesive and Electrical Performance of Waterborne Epoxies for Interlayer Dielectric Material (opens in a new tab)

  9. Nanoarchitecture-property Relationships in Tise2 Based Nanolaminates for Development of Novel Design Strategies in Composite Thermoelectric Materials

    … of metastable thermoelectric thin film materials and is split into 3 primary sections. Section 1 focuses on formation mechanisms of FeSbx compounds from layered precursors. It was found that a compositionally favorable and homogeneous nucleation environment allowed for the nucleation of …

    oregon Repository record for Nanoarchitecture-property Relationships in Tise2 Based Nanolaminates for Development of Novel Design Strategies in Composite Thermoelectric Materials (opens in a new tab)

  10. A Study of Machining Effects on the Surface Integrity, Strength Properties, Damage Evolution and Fatigue Strength of Composite Laminates

    … Evolution and Fatigue Strength of Composite Laminates Harinder Singh Oberoi Chair of the Supervisory Committee: Dr. Ramulu Mamidala Department of Mechanical Engineering With the increased usage of Carbon Fibre Reinforced Plastics (CFRP) Composite Laminate Materials in various industries, an …

    washington Repository record for A Study of Machining Effects on the Surface Integrity, Strength Properties, Damage Evolution and Fatigue Strength of Composite Laminates (opens in a new tab)

  11. Investigation into the Effects of Wire Mesh on Tensile and Impact Properties of Fiber Metal Laminates

    … the tensile and impact behavior of Fiber Metal Laminates by combining 5052 aluminum mesh or2024-T3 aluminum sheets,2.47 N (8.9 oz) or 6.67 N (24 az) ShieldStand® S fiberglass, and Hysol EA 9313 epoxy. Testing was performed under the guidelines of ASTM D3039-00 utilizing an lnstron 8802 …

    embry-riddle Repository record for Investigation into the Effects of Wire Mesh on Tensile and Impact Properties of Fiber Metal Laminates (opens in a new tab)