Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"lap shear test"”.

  1. Constitutive Property Testing and Reliability Assessment of Lead-Free Solder Joint

    A modified single lap shear test configuration, based on the Iosipescu geometry, is proposed to characterize mechanical properties of solder alloys. In the method, an auxiliary device (extension unit) is employed to improve the accuracy of measurement. The extension unit is attached directly to the …

    maryland Repository record for Constitutive Property Testing and Reliability Assessment of Lead-Free Solder Joint (opens in a new tab)

  2. Development of Bio-based Wood Adhesive by Using Cellulose Nanofiber Reinforcement and Crosslinking Agent for Improved Bonding Strength

    … and a crosslinking agent was also used. Single-lap shear test, flexural and internal bond tests were performed on dry and water-immersed samples to measure the bond strength. Fractured bond surfaces were studied using optical observation and scanning electron microscopy (SEM) to determine bond …

    ndsu Repository record for Development of Bio-based Wood Adhesive by Using Cellulose Nanofiber Reinforcement and Crosslinking Agent for Improved Bonding Strength (opens in a new tab)

  3. BOND STRENGTH EVALUATION IN ADHESIVE JOINTS USING NDE AND DIC METHODS

    … defects and reliably predicting the bond shear strength. As a result, adhesive bonding technology is still not solely implemented in primary structures of an aircraft. Therefore, there is a greater demand for a novel NDE tool that can meet the existing aerospace requirement for adhesive …

    siu-theses Repository record for BOND STRENGTH EVALUATION IN ADHESIVE JOINTS USING NDE AND DIC METHODS (opens in a new tab)

  4. Micropatterned cell sheets as structural building blocks for biomimetic vascular patch application

    … exhibited strong inter-layer bonding as shown by lap shear test. Uniaxial tensile testing of monolayer VSMC sheets and bilayer VSMC patches displayed nonlinear, anisotropic stress-stretch response similar to the biomechanical characteristic of a native arterial wall. Collagen content and structure …

    bu Repository record for Micropatterned cell sheets as structural building blocks for biomimetic vascular patch application (opens in a new tab)

  5. Efeito do envelhecimento acelerado em compósitos utilizados para recuperação de dutos na indústria petrolífera

    … infrared spectroscopy (FTIR), permeability test and lap shear test. Results show that chemical changes occurred in the aged repair, as well as alterations in mass, fiber exposure, increase in glass transition temperature, increase in permeability and more pronounced debonding composite/metal …

    brazil-ufrn Repository record for Efeito do envelhecimento acelerado em compósitos utilizados para recuperação de dutos na indústria petrolífera (opens in a new tab)

  6. Photoactivated Fixation of Cartilage Tissue

    … as a parametric guide, in vitro mechanical testing of photochemically bonded meniscal fibrocartilage and hyaline articular cartilage tissues was performed using a modified single-lap shear test. Finally, the cellular viability and bond stability of a photochemically bonded cartilage …

    gatech Repository record for Photoactivated Fixation of Cartilage Tissue (opens in a new tab)

  7. Manufacturing and Evaluation of Kenaf/Polypropylene Honeycomb Cores

    … properties, as well as in-plane and out-of-plane shear properties of the flat sheets have been analysed by conducting experiments through ‘design of experiment’ methodology. Since melt flow indices and die temperature appear to be critical factors influencing the average and variation in the …

    auckland-ms Repository record for Manufacturing and Evaluation of Kenaf/Polypropylene Honeycomb Cores (opens in a new tab)

  8. Development of Magnetorheological Elastomer System for Adaptive Vibration Isolation

    … of the AB system, and large-scale component testing and evaluation. In addition, since no fabrication and testing systems were available in the market, testing and fabrication units were developed to facilitate the manufacturing of small and large-size MRE specimen, and a double-lap shear …

    unr Repository record for Development of Magnetorheological Elastomer System for Adaptive Vibration Isolation (opens in a new tab)

  9. Roll bonding of metal-polymer-metal sandwich composites

    … strength have been investigated using the peel test. Mechanical interlocking was the primary adhesion mechanism in direct bonding of the aluminum and polyurethane. The failure mode transitioned from adhesive to cohesive as the surface roughness increased. The optimum rolling speed and preheat …

    iastate Repository record for Roll bonding of metal-polymer-metal sandwich composites (opens in a new tab)

  10. Crystallization, Morphology, Thermal Stability and Adhesive Properties of Novel High Performance Semicrystalline Polyimides

    … polyimides. The BPDA based polyimide was also tested extensively as a structural adhesive using Ti-6Al-4V coupons. Additionally, these polyimides are based on monomers, that are presently commercially available. The bulk thermal stability of the polyimides was first evaluated using dynamic and …

    vt Repository record for Crystallization, Morphology, Thermal Stability and Adhesive Properties of Novel High Performance Semicrystalline Polyimides (opens in a new tab)

  11. Synthesis and Characterization of Aryl Phosphine Oxide Containing Thermoplastic Polyimides and Thermosetting Polyimides with Controlled Reactivity

    … than that of the Tg of the primary structure. Lap shear test results indicated good adhesion to titanium when cured at 250°C -280°C. The cured materials showed high glass transition temperatures and good thermal and thermo-oxidative stability as determined by DSC, TGA and DMA. Good chemical …

    vt Repository record for Synthesis and Characterization of Aryl Phosphine Oxide Containing Thermoplastic Polyimides and Thermosetting Polyimides with Controlled Reactivity (opens in a new tab)

  12. Steering of Thermoplastic Composite Tapes using Hot Gas Torch-assisted Automated Fiber Placement

    … tape was investigated through observation and testing. Through geometrical analysis, it was found that with a decrease in the steering radius of the tape there was a decrease in the tape width and an increase in the tape thickness. A significant reduction in the steering induced defects was …

    concordia Download PDF for Steering of Thermoplastic Composite Tapes using Hot Gas Torch-assisted Automated Fiber Placement (opens in a new tab)

  13. Rate-Dependent Interlaminar Shear Characterization in Solid-State Extruded Ultrahigh Molecular Weight Polyethylene Film Composites

    … delamination properties. Mode-II interlaminar shear (ILS) fracture-driven delamination has been shown to be a significant energy absorption mechanism. Therefore, accurately characterizing ILS behavior as a function of strain rate in these composites is essential to inform computational models. …

    south-carolina Repository record for Rate-Dependent Interlaminar Shear Characterization in Solid-State Extruded Ultrahigh Molecular Weight Polyethylene Film Composites (opens in a new tab)

  14. Effect of Surface Treatment on Joint Performance and Fracture Morphology in Adhesively Bonded Al-Si Coated Ultra-High Strength Steel

    … joined adherends were evaluated using the single-lap shear (SLS) test to investigate the nine material conditions (three surface treatments, three steel thermal processing treatments). The measured joint strength of the GB and AP conditions were 60% and 56%, respectively, higher than the baseline …

    waterloo Repository record for Effect of Surface Treatment on Joint Performance and Fracture Morphology in Adhesively Bonded Al-Si Coated Ultra-High Strength Steel (opens in a new tab)

  15. Hybrid Single Shot Manufacturing of Multi-Materials Structure for Automotive Applications

    … the challenges that conventional methods face. A lap shear test is conducted to address the bonding conditions between polypropylene and CF/Epoxy prepreg. The experimental results presented in the previous chapters have revealed that the final geometry of the hybrid part is highly dependent on the …

    clemson Repository record for Hybrid Single Shot Manufacturing of Multi-Materials Structure for Automotive Applications (opens in a new tab)

  16. EFFECT OF ADHESIVE ON THE SHAPE MEMORY BEHAVIOUR OF THERMOPLASTIC POLYURETHANE

    … acrylic based pressure sensitive adhesives were tested to bond the film to the substrate, namely a commercial high shear strength transfer tape and two solvent based adhesives of high and low shear strength that were manually cast. The influence of the adhesive was given significant attention as …

    mcmaster Repository record for EFFECT OF ADHESIVE ON THE SHAPE MEMORY BEHAVIOUR OF THERMOPLASTIC POLYURETHANE (opens in a new tab)

  17. Development of Anchor Systems for FRCM Retrofits

    … (unidirectional and bidirectional) on the direct shear behaviour of C-FRCM composites bonded to a concrete substrate, especially the fibre-matrix bond which is the most common debonding interface of FRCM composites. Calibrated models of the bond – slip behaviour are provided based on the fabric …

    ottawa-retro Repository record for Development of Anchor Systems for FRCM Retrofits (opens in a new tab)

  18. The Thermal Stability of Anodic Oxide Coatings - Strength and Durability of Adhesively Bonded Ti-6Al-4V Alloy

    The lap shear strength of chromic acid anodized, primed, Ti-6Al-4V alloy bonded with a high performance FM-5 polyimide adhesive has been investigated as a function of thermal treatment for selected times at various temperatures in air. The research findings indicate that the lap shear strength …

    vt Repository record for The Thermal Stability of Anodic Oxide Coatings - Strength and Durability of Adhesively Bonded Ti-6Al-4V Alloy (opens in a new tab)

  19. Experimental Testing and Modelling of Adhesively Joined T-structures

    … of applying bulk material and coupon-level test data to predict structural response and failure under quasi-static and dynamic conditions. Two commercial toughened structural epoxy adhesives were investigated (DP460NS and SA9850, 3M Company, Minnesota) to join structures subject to …

    waterloo Repository record for Experimental Testing and Modelling of Adhesively Joined T-structures (opens in a new tab)