Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 26 for “"laser etching"”.
-
Microprocessing of crystalline saphyre by using femtosecond radiation assisted selective laser etching /
… material with high intensity ultrashort laser radiation. Due to the short pulse durations, the focused radiation is absorbed locally in the volume of the material. Laser modified sites etch in alkaline or acidic solutions at a much higher rate than the unmodified pristine material, …
-
The Effects of Laser Etching on Biocompatability and Mechanical Properties of Polyetheretherketone
… implant material due to its inherent properties. Laser etching has become a popular means to create identification markers on the individual implants as required by the FDA. The interaction of laser energy with polymeric materials could potentially cause changes in the material's biocompatibility …
-
Fabrication of functional arbitrary shape microstructures from transparent materials using femtosecond laser-induced selective laser etching /
… materials is rather complicated. Femtosecond laser-based microprocessing techniques are a desirable alternative for glass and crystal microprocessing. The selective laser-induced etching (SLE) technique could be a good option even for high-complexity 3D structure formation from glasses and …
-
Tensile Bond Strength comparison of Orthodontic Brackets Following Enamel Acid Etching and Carbon Dioxide Laser Etching
… enamel. An experimental alternative method for etching enamel is that of using a carbon dioxide (CO2) laser. It has been claimed that CO2 laser etching may provide a rougher and more consistently etched surface than acid etching. It was evident that more research is needed to evaluate the …
-
Mikrodarinių formavimas safyre naudojant femtosekundinio lazerio spinduliuotę ir selektyvų ėsdinimą /
… FABRICATION OF MICROSTRUCTURES IN SAPPHIRE BY FS-LASER IRRADIATION AND SELECTIVE ETCHING The formation of three-dimentional microstructures in saphire volume using femtosecond laser and selective laser etching is investigated in this study. The theoretical data about interaction of ultrashort …
-
Comparison of Bracket Bond Strength by Total, Self-Etch and Laser Treatment
Laser etching of enamel surfaces alters the physical and chemical characteristics of the enamel. These changes in characteristics enhance the bonding to enamel. The purpose of this study was to compare the shear and tensile bond strength of Er,Cr:YSGG hydrokinetic laser system (Biolase) with 37% …
-
Vektorinių cilindrinių pluoštų panaudojimas selektyviam lazeriniam ėsdinimui /
Selective laser etching (SLE) is a universal manufacturing technology that allows the formation of complex microchannels, cuts in transparent materials, and various 3D components from glass or sapphire. Sharply focused femtosecond laser irradiation induces localized changes in the physical and …
-
LASER-INDUCED ETCHING OF POLYCRYSTALLINE CERAMIC MATERIAL A12O3TiC
Laser-induced etching of polycrystalline ceramic material AlO3TiC in both KOH and H3PO4 solutions was investigated in detail for various experimental parameters such as etchant concentration, incident laser power, scan speed of the laser beam and number of scans. Generally, with the variation of …
-
Reduction of bacterial adhesion on laser etched surfaces for reducing pin tract infections
… and experimentally. In this study a picosecond laser etching on 316L stainless steel samples was used to generate a series of microstructures (0.18 μm-2 μm). The surface properties of these micro-nano structures were characterised using the water contact angle method, while the surface …
-
Etching of Enamel With a CO₂ Laser: An in Vitro Study Using Evaluation with a Scanning Electron Microscope
… cut into the buccal surface, two were for laser etching, one served as acid etch control, and one as unetched enamel. Laser exposures were at 5W .05 sec, 10W .01sec, and 10W .02sec with a Luxar CO2 laser. A .8mm focal spot was used throughout Scanning electron microscope (SEM) exam was …
-
Aukštos skyros funkcinių mikrodarinių formavimas ir taikymai /
The appearance of the ultrashort laser pulses opens up new possibilities in the materials processing, especially in the formation of the 3D microstructures. In this thesis, several topics related to these laser technologies are explored and discussed for the fabrication of microstructures, …
-
Effect of Surface Roughness on Cloud Cavitation
… levels (Ra = 5, 20, 55, 80 μm) were produced by laser etching on the diverging wall, spanning hydraulically smooth (k+ = 4.68), transitionally rough (k+ = 18.71 and 51.45), and fully rough (k+ = 74.84) regimes at a Reynolds number of 215492. High-speed videography combined with optical flow …
-
Bond Strength of Orthodontic Brackets Attached to Bovine Enamel Treated with Acid Etching and Carbon Dioxide Laser
… bracket and the tooth. An alternative method for etching enamel is to use a carbon dioxide (CO2) laser for etching rather than acid. Preliminary research indicates that CO2 laser etching may provide a rougher and more consistently etched surface than acid etching. Bond studies are necessary to …
-
RF Heating of Laser-Induced Graphite (LIG) on Polymer Surfaces
In this report, we investigate laser-induced graphite (LIG) structures formed in polymeric substrates in order to quantify LIG heating response to radio frequency (RF) fields. Graphitic structures were produced from various polymeric substrates via laser irradiation of the polymer surface. We find …
-
Partial discharge behaviour under AC and DC conditions including novel manufacture techniques for void-type dielectric samples
… approaches; 3D printing and subsurface laser etching (SSLE). In this study, 3D printing was found to be more successful in enabling void type PD behaviour. Initial explorations were made of AC/DC PD behaviour of multiple void samples and thermally aged samples.
-
VISUALIZING AROMA: SPATIALLY RESOLVED, HIGH-THROUGHPUT, AND AUTOMATED DETECTION OF ODORANTS IN GRAPES USING AMBIENT IONIZATION MASS SPECTROMETRY
… volatiles from the headspace of a sample. By laser-etching thin films of polydimethylsiloxane, SPMESH Sheets could be made to fit on multi-well plates. This allowed for extraction and pre-concentration of 24 samples in parallel, followed by automated analysis by Direct Analysis in Real Time …
-
Codex : code X : a palimpsest reading of the book as a material object in a new media age
… investigations included experimental work with laser etching and the embedding of printed, paper pages in porcelain. A synthesis of the theoretical and practical research findings, was then interpreted as semiotic conceptual matrices, from which a Conceptual Framework was constructed. …
-
Selective removal of fluorinated tin oxide (SnO2:F) from Pilkington TEC glass
High power lasers are utilized in a variety of processes in solar energy production and energy storage. In the production of CdTe (Cadmium Telluride) solar cells, pulse lasers are used for the so called P1 scribe step that is the first step in process of creating discrete series connected cells on …
-
LASER-INDUCED TEMPERATURE RISE AND ETCHING
The polarization-dependent model of laser-induced temperature rise was developed by incorporating the surface absorption of S and P polarizations. The beam polarizations greatly affect the laser-induced temperature rise. Laser beam with P polarization can induce higher temperature rise than S …
-
Novel Drop Impact Configurations on Microstructured Surfaces: Non-Newtonian Fluids and Structure Gradients
… 15). The gradient surfaces were prepared using a laser-etching process with grooves systematically fabricated on aluminum substrates. It was found that the line spacing between the grooves did not influence the drop spreading. During the retraction stage the effect of drop pinning, caused by …
Page 1 of 2