Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 67 for “"laser vibrometer"”.

  1. Digital frequency demodulation for a laser vibrometer

    … to a Michelson interferometer-based scanning laser vibrometer. The laser vibrometer is a velocity transducer that produces frequency-modulated signals that have traditionally been optically or electronically frequency shifted from baseband to an intermediate frequency. This shifting produces a …

    vt Repository record for Digital frequency demodulation for a laser vibrometer (opens in a new tab)

  2. A study of some parameters affecting performance of a laser vibrometer

    <p>For a laser vibrometer scanning a diffuse surface, the observed signal is dependent partly upon the visibility of the reflected speckle pattern. This study will show that the visibility of the speckle interference fringes is independent of the incident light intensity and dependent on the number …

    ut-knoxville Repository record for A study of some parameters affecting performance of a laser vibrometer (opens in a new tab)

  3. Modal Analysis and Validation of a Gasoline Fuel Injector Using Ansys and Laser Vibrometer

    … of the fuel injector and validate with a laser vibrometer measurement and correlate with sound measurement results. In this thesis, a finite element model is developed using Ansys 8.0. Modal analysis was performed to determine the modes of vibration and natural frequencies of the fuel …

    odu Repository record for Modal Analysis and Validation of a Gasoline Fuel Injector Using Ansys and Laser Vibrometer (opens in a new tab)

  4. A Formulation for Updating Finite Element Models Through Consistent Use of Laser Vibrometer Data

    … finite element(FE) models using scanning laser Doppler vibrometer(SLDV) dynamic response data. The update formulation is demonstrated in several computer simulations. The formulation is the result of incorporating an analytical FE model into an experimental model. The experimental model …

    vt Repository record for A Formulation for Updating Finite Element Models Through Consistent Use of Laser Vibrometer Data (opens in a new tab)

  5. Evaluation of vibration response of ceramic candle filters using an accelerometer and a laser vibrometer.

    … the boundary conditions of the filters using a laser vibrometer and an accelerometer. The study includes evaluation of vibration data from a laser-based sensor as compared to the traditional contact sensor; assessment of vibration data quality excited by laser pulses as compared to the …

    wvu Repository record for Evaluation of vibration response of ceramic candle filters using an accelerometer and a laser vibrometer. (opens in a new tab)

  6. The measurement of vibrational power transmission using laser technology

    … increases with transducer mass. In contrast, laser Doppler vibrometers offer a remote, non-contacting means of vibration measurement. Practical power flow measurement results obtained using two I.S.V.R. laser vibrometers compare favourably with those acquired simultaneously employing the two …

    soton Download PDF for The measurement of vibrational power transmission using laser technology (opens in a new tab)

  7. Modal Testing And Analysis Techniques And Their Application On A Small UAS

    … a novel sensor placing procedure that uses a laser vibrometer to identify key sensor locations. These techniques are applied in a case study on a small unmanned aerial system, (UAS). The airframe, the BTE Super Hauler, is a small UAS used by the Unmanned Aircraft Systems Engineering (UASE) …

    nodak Repository record for Modal Testing And Analysis Techniques And Their Application On A Small UAS (opens in a new tab)

  8. Three Dimensional Digital Image Correlation for Dynamic Measurements

    … cabling and setup. Optical techniques, such as laser Doppler vibrometry and photogrammetry, have been developed to allow technicians to inspect the structure with little or no physical access to the structure and minimal cabling. Digital Image Correlation (DIC) is a photogrammetry technique that …

    waterloo Repository record for Three Dimensional Digital Image Correlation for Dynamic Measurements (opens in a new tab)

  9. Magnetic Transduction for RF Micromechanical Filters

    … driven microresonators is studied. Using a laser vibrometer, the actual performance, including the displacement and velocity of the moving points of the microstructures’ surfaces, are measured. The mode shapes and resonance specifications of the microstructures in air and vacuum derived by …

    waterloo Repository record for Magnetic Transduction for RF Micromechanical Filters (opens in a new tab)

  10. Study of Laboratory and Field Techniques to Measure Shear Wave Parameters - Frequency Effects

    … new calibration procedure using state of the art laser vibrometer is used to understand the bending behavior of benders in air and in tip to tip configuration. Shear wave velocity comparison between RC and BE tests is done in usual practice, however, the frequency effects from these two tests are …

    waterloo Repository record for Study of Laboratory and Field Techniques to Measure Shear Wave Parameters - Frequency Effects (opens in a new tab)

  11. Free-running chip-based dual-comb vibrometry

    Stand-off laser based vibrometry is the standard for measuring vibrations otherwise not accessible using mechanical vibration measurement techniques. Laser Doppler vibrometers are a commercially available laser vibrational technique, however sensitivity is limited by laser speckle noise, and a …

    adelaide Repository record for Free-running chip-based dual-comb vibrometry (opens in a new tab)

  12. Non-destructive Evaluation of Damage in Concrete with Applications in Shallow Foundations

    … of low and high frequency transducers using laser vibrometer to characterize their responses for better ultrasonic measurements.  Characterization of a single fracture growth in a homogenous material based on wave velocity and wave attenuation.  Characterization of cement-based materials …

    waterloo Repository record for Non-destructive Evaluation of Damage in Concrete with Applications in Shallow Foundations (opens in a new tab)

  13. MICROFABRICATION OF MEMS AND AFM PLATFORMS FOR LUBRICATION STUDY

    … modes are measured experimentally using a laser vibrometer and qualitatively match the FEM modelling. A new AFM based approach is also presented for measuring the friction of free standing MEMS structures. Special MEMS cantilevers are also microfabricated for low friction force measurement …

    nus Repository record for MICROFABRICATION OF MEMS AND AFM PLATFORMS FOR LUBRICATION STUDY (opens in a new tab) Download file for MICROFABRICATION OF MEMS AND AFM PLATFORMS FOR LUBRICATION STUDY (opens in a new tab)

  14. Characterization of MEMS a directional microphone with solid and perforated wings

    … sound at different angles were measured using a laser vibrometer. Both sensors showed good sound coupling and measured and simulated frequency responses are in good agreement. The sensor with perforated wings was found to have faster response compared with that of the solid wings primarily due to …

    nps Repository record for Characterization of MEMS a directional microphone with solid and perforated wings (opens in a new tab)

  15. Acquisition and analysis of ultrasonic wavefield data to characterize angle-beam propagation and scattering in plates

    … scattering from defects is described. A laser vibrometer and XY scanner are used to record high resolution wavefield data for angle-beam waves propagating in both a defect-free plate and a plate containing crack-like defects emanating from a through-hole. The properties of angle-beam wave …

    gatech Repository record for Acquisition and analysis of ultrasonic wavefield data to characterize angle-beam propagation and scattering in plates (opens in a new tab)

  16. Noncontact nonlinear resonance ultrasound spectroscopy for small metallic samples

    … air-coupled piezoelectric transducers and a laser vibrometer detects the out-of-plane velocity of the vibrating specimen surfaces. The amount of the shift of the resonance frequency for increasing excitation levels represents the nonlinear behavior of the material. The experimental setups …

    gatech Repository record for Noncontact nonlinear resonance ultrasound spectroscopy for small metallic samples (opens in a new tab)

  17. Vibrations of high-speed dental handpieces measured using laser vibrometry

    … loaded conditions using a non-contact Scanning Laser Vibrometer (SLV). Methods: Five turbines (two KaVo, three W&H) and two speed-increasing handpieces (one KaVo and one W&H) were investigated using a Polytec SLV (PSV-300). Handpieces were operated under various conditions which included …

    birmingham Download PDF for Vibrations of high-speed dental handpieces measured using laser vibrometry (opens in a new tab)

  18. TUNING LONGITUDINAL BANDGAPS USING COMPLIANT BISTABLE METASTRUCTURAL DESIGNS

    … response is measured on the top surface using a laser vibrometer. LMS SCADAS data acquisition system analyzes the data and generates FRFs, and structural bandgaps are then identified by using them. Two analytical models are developed to predict and validate the bandgaps achieved by the structure. …

    mtu Repository record for TUNING LONGITUDINAL BANDGAPS USING COMPLIANT BISTABLE METASTRUCTURAL DESIGNS (opens in a new tab)

Page 1 of 4