Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 4423 for “"lasers"”.
-
Raman lasers intracavity-pumped by semiconductor disk lasers
Semiconductor disk lasers (SDLs) are efficient and commercially attractive devices as they can emit several Watts in continuous-wave (cw) operation, with good beam quality, low noise and great wavelength flexibility. SDL fundamental emission ranges from red to mid-infrared, while ultraviolet and …
-
Holographic lasers
… the development of CW adaptive solid state lasers which dynamically correct for phase distortions within their cavity by phase conjugation. A fibre based four-wave mixing scheme is investigated but no experimental evidence of any phase conjugation is observed.
-
Ce:LiLuf4 lasers
… on gain and lasing in broadly tunable Ce:LiLuF lasers and secondly towards the development of Ce:LiLuF lasers suitable for spectroscopic applications.</p> <p>Detailed measurements of the single-pass, small-signal gain in Ce:LiLuF were undertaken, with a gain coefficient as high as 30±1 …
-
Ultrafast waveguide lasers
Mode-locked lasers with repetition-rates in excess of 1 GHz have many applications in areas such as optical sampling, non-linear microscopy, and optical frequency metrology. To date there have been very few demonstrations of such high repetition-rate lasers with sub-picosecond operation and high …
-
Tapered waveguide lasers
… the design and fabrication of tapered waveguide lasers to allow efficient, high-power diode-pumping and produce diffraction-limited, near-symmetrical output, whilst maintaining a monolithic design compatible with integrated optical circuits. <br/><br/>The design rules required for efficient …
-
Quantum dot lasers
<p>Here we present direct investigation of the lasing behaviour by performing gain spectroscopy of solution-based CQDs enabled via in-situ tuning of the feedback wavelength of an open-access hemispherical microcavity. The investigation is performed on two different types of CQDs, namely spherical …
-
Semiconductor Ring Lasers
… was comparable to that of similar size straight lasers. Standard structures defined by optical lithography in DH and QW materials lased successfully. E-beam defined devices with successively narrower ribs down to 0.4mum, and shorter ring cavities down to 12mum in diameter, increased the optical …
-
Femtosecond Fiber Lasers
… I have done on ytterbium-doped femtosecond fiber lasers. These lasers operate in the near infrared region, lasing at 1030 nm. This wavelength is particularly important in biomedical applications, which includes but is not limited to confocal microscopy and ablation for surgical incisions. …
-
Fluoride Fiber Lasers
Compared to other laser platforms, fiber lasers have the advantages of outstanding heat dissipating capability, high power scalability, excellent beam quality, inherent simplicity and compactness, robust manufacturing and maintenance, and hermetically guided laser beams. Fiber lasers have seen …
-
Nitride polariton lasers
The major aim of this doctoral thesis involved the novel development of all-dielectric GaN-based planar microcavity structures for the reduction of polariton lasing threshold at room temperature operation when the device is optically excited, while setting also the fundamentals of subsequent …
-
A study of lasers optically pumped by HF and DF lasers
Not available
-
Integrable semiconductor ring lasers and two-dimensional rectangular lattice distributed feedback lasers
Two types of integrable semiconductor lasers are investigated in this thesis. Semiconductor ring lasers with circular and square ring resonators are analyzed, and their fabrications and laser results are described. Two-dimensional rectangular lattice distributed feedback lasers are proposed and …
-
Transverse confinement in lasers
We divide lasers into two classes, depending on their aspect ratio : defined to be the ratio of the width of the transverse beam to the characteristic scale of the pattern comprising it. We have studied, theoretically, the transition from large to small aspect ratio systems by considering the …
-
Advancing Mid-IR Lasers
… due to strong vibrational transitions. Mid-IR lasers, tuned to these absorption lines, are an excellent source for detecting trace gases such as air pollutants for environmental monitoring, biomarkers in exhaled human breath for medical diagnosis, and trace explosives for security. Furthermore, …
-
Modelling Quantum Well Lasers
In this thesis, two methods to model quantum well lasers will be examined. The first model is based on well-known techniques to determine some of the spectral and dynamical properties of the laser. For the spectral properties, an expression for TE and TM modal amplitude gain is derived. For the …
-
High-power fibre lasers
… rare-earth (Yb3+, Er3+/Yb3+)-doped fibre lasers. Some of the main capabilities of fibre lasers such as: High brightness and thermal properties were exploited for the development of a variety of continuous wave (CW) and Q-switched devices, whose characteristics also includes compactness. …
-
Integrated Semiconductor Ring Lasers
The concept of a semiconductor laser with a circular resonator, its advantages and particular problems are discussed. The pillbox resonator is introduced and its operation on whispering gallery modes is illustrated using a computer model. The experimental evidence of the guiding mechanism is shown, …
-
Semiconductor quantum dot lasers.
… than for two-dimensional quantum well (QW) lasers. At higher temperatures, the threshold current are governed mainly by the depth of the separate confinement region.
Page 1 of 222