Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 224 for “"lateral loading"”.
-
Lateral Loading of Shear Wall Models
… to study the behaviour of such models under lateral load. The analysis of the problem was done by treating the model as a thin-walled cantilever beam based on Vlasov's thin-walled beam theory. The test and analytical results are compared to investigate the validity of this approach.</p>
-
Monopile foundations under complex cyclic lateral loading
… foundations. These foundations experience lateral loading which is both cyclic and complex: continuously varying in amplitude, direction, frequency and eccentricity with the environmental and turbine operation conditions. The effect of cyclic loading on the accumulated rotation …
-
Cyclic lateral loading of monopile foundations in cohesionless soils
… loads during their lifetime, whereas such loading conditions are not as prevalent in oil and gas design. As a result, the pile response due to this cyclic loading is poorly accounted for in current practice.</p> <p>This thesis presents experimental and theoretical research, aimed at …
-
Influence of Pile Shape on Resistance to Lateral Loading
The lateral resistance of pile foundations has typically been based on the resistance of circular pipe piles. In addition, most instrumented lateral load tests and cases history have involved circular piles. However, piles used in engineering practice may also be non-circular cross-section piles …
-
Strength of Block Masonry Walls Subject to Lateral Loading
… and to assess the design methods for laterally loaded walls.</p> <p>The experimental program included 30 full scale wall tests representing different support conditions and aspect ratios. In addition, stack bonded prisms and wallettes were used to determine the flexural tensile …
-
FRP-confined capsule-shaped columns under axial and lateral loading
… capsule-shaped columns subjected to axial and lateral loads. The main parameters of the study were the effect of section geometry and the number of ply of transverse FRP sheets. The axial load tests showed significant enhancement in axial load capacities of capsule-shaped columns. The proposed …
-
Centrifuge Modelling of Monopiles in Sand Subject to Lateral Loading
… is subject to greater magnitude cyclic lateral loads and overturning moments at the seabed which need to be managed. Current design for laterally loaded monopiles follows the philosophy adopted in the offshore oil and gas industry, of which the piles are slender and present …
-
Investigation of the Resistance of Pile Caps to Lateral Loading
… be expected to provide significant resistance to lateral loads. However, practical procedures for computing the resistance of pile caps to lateral loads have not been developed, and, for this reason, cap resistance is usually ignored. Neglecting cap resistance results in estimates of pile group …
-
Single shear vs. double shear for nails in lateral loading
… joints to determine (1) the relationship of the lateral load-carrying capacity of nails in single and double shear, and (2) to develop a basis for structural design data for laterally loaded nails in double shear applicable whenever deformation is a governing factor, such as in joints of trussed …
-
Full Scale Static and Dynamic Lateral Loading of a Single Pile
… at a site in Pinehill, Auckland. Static lateral loads were applied by using hydraulic jack, while dynamic loads were applied using an eccentric mass shaker. The free vibration and snap-back tests were also performed by using instrumented sledgehammer and snap shackle as the quick release …
-
Numerical study on the response of pile groups under lateral loading
… in a group, soil–pile interaction reduces the lateral resistance of the individual piles. A practical approach to characterize the group behavior in different pile groups is using appropriate factors such as p–multiplier or group reduction factor. The experimental studies on pile groups are …
-
Behaviour of multi-storey cross-laminated timber buildings under lateral loading
… to high seismicity would be subject to higher lateral loads due to wind and earthquakes than CLT buildings which have already been completed. The lack of structural design codes and limited literature regarding the performance of CLT buildings under lateral loading are barriers to the adoption …
-
Medium scale field testing of monopile foundations under cyclic lateral loading
… industry (Wind Europe 2021). The geometry and loading experienced by these foundations differs from historical offshore structures used by the oil and gas industry, about which design methods and standards have been developed. When applied to monopiles, the widely used <em>p-y</em> method and …
-
Lateral Loading of Small-Scale Shear Wall Buildings with Floor Slabs
… only wall openings. The results of static loading of the buildings were compared with those results predicted analytically using Vlasov's thin-walled elastic beam theory.</p>
-
Performance of cross-laminated timber shear walls for platform construction under lateral loading
… market. CLT is very effective in resisting lateral forces resulting from wind and seismic loads. This research investigated the in-plane performance of CLT shear wall for platform-type buildings under lateral loading. Analytical models were proposed to estimate the in-plane stiffness of CLT …
-
Stress developments within a backfilled mine stope and the lateral loading on the barricade
… identified by previous studies. Although the lateral variation of vertical stress is well understood, there is a lack of simplified models to estimate the vertical stress at any point within the backfilled structure. Vertical stress isobars, were created with the use of numerical simulations, …
-
Generalised methods for the development of 1D models of monopiles for monotonic lateral loading
… (ULS) and fatigue limit state (FLS) design of laterally loaded monopiles recommend the use of 1D models to make rapid calculations for the preliminary design of laterally loaded monopiles. Then a more complex time-consuming 3D finite element analyses can be undertaken to finalise and validate …
Page 1 of 12