Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"layer transfer"”.
-
Mechanisms of layer-transfer related to silicon-on-insulator structures
… are related to a general process. A trapping layer for hydrogen was introduced by ion beam implantation into the silicon wafer. Next, this wafer was hydrogenated using a hydrogen plasma. It was hypothesized that the trapping layer acts as a getterer for the hydrogen diffusing into the silicon …
-
Effect of Layer Transfer and Plasma Etching on The Behavior of Transition-Metal Dichalcogenide Field-Effect Transistor Arrays
The application of two-dimensional (2D) layered transition metal dichalcogenide (TMDC) for high-performance large-area memory applications requires establishing long-term electrical stability through an understanding of the carrier transport and the effect of the materials processing on the device …
-
Calculation of Critical Thickness and Ion Penetration in Epitaxial Film for Monolithic Integration and Layer Transfer of Semiconductor Heterostructures
… and gives an accurate calculation of the layer thickness that can be grown without defects and dislocations. The calculations are also carried out on various buffer layers that are strategically grown between the film and the substrate with the aim of relaxing the strain acting on the …
-
Kontakto grafenas – metalas formavimas ir elektrinių savybių tyrimas /
… introduction into graphene structure and its monolayer synthesis as well as graphene transfer methods using polymer coatings are presented. The main idea of this research is to form a graphene – metal contact and study its contact resistance when for contact formation we used two different metals. …
-
Using Age Layered Population Structure for the Multi-Depot Vehicle Routing Problem
… multi-population genetic algorithm based on age layered population structures for the MDVRP is proposed. Three inter-layer transfer strategies are proposed and multi-objective fi tness evaluation is compared with weighted sum approach. An empirical study comparing the proposed approach with …
-
Application Layer Optimization of Big Data Transfer Throughput Using RL
… order to improve performance of these large data transfers, there has been work at almost every level of networking stack for the optimization of available network bandwidth utilization. Most of the existing solutions suffer from drawbacks such as (1) the solution being too costly (e.g., replacing …
-
Anglies nanosluoksniai difrakcinei terahercų ruožo optikai /
… the fabrication technology of graphene layer transfer on silicon wafer and evaluation of graphene quality by using four probe measurement and Raman spectroscopy. Two different THz measurement techniques - THz Time Domain Spectroscopy and THz Continuous Wave –imaging systems are discused …
-
Development of Advanced Nanomanufacturing: 3D Integration and High Speed Directed Self-assembly
… for nanopatterning and fabrication of 3D multilayer polymeric structures in the micro- and nano-scale, by optimizing the layer-transfer and transfer-bonding techniques. These techniques allow the integration of microfluidic and photonic systems in a single chip for achieving ultracompact …
-
An investigation into frictional surface interactions and their effect on brake judder.
The chemical nature of the Transfer Film (T.F.) or Third-Body Layer (T.B.L.) formed at the friction interface of an automotive friction brake during off-brake motoring has been studied using Energy Dispersive X-ray (E.D.X.) analysis and Scanning Electron Microscopy (S.E.M.). Although these …
-
Fabrication and characterization of ferro- and piezoelectric multilayer devices for high frequency applications
… was only possible after the development of a new layer transfer fabrication method for parallel-plate ceramic devices. This method, which was successfully used to fabricate tunable ferroelectric capacitors and AlN bulk acoustic wave resonators, allows for high-quality ceramic film growth on …
-
Strain Effect in III-Nitride Thin Film Based High Electron Mobility Transistors
… by depositing single-crystalline BeO layer on top of AlGaN/GaN HEMT heterostructures. A 20-nm BeO layer with macroscopic polarization on top of the AlGaN barrier layer can increase the 2-DEG density at the interface of AlGaN/GaN heterostructure. Hall-effect measurement confirms that …
-
Dielectric-graphene integration and electron transport in graphene hybrid structures
… deposition of metal-oxide dielectrics by atomic layer deposition (ALD) thanks to the Coulomb scattering by charged point defects in the dielectric. We investigate a novel method for the ALD of metal-oxide dielectrics on graphene, using an ultrathin nucleation layer that enables the realization of …
-
Electronic properties and device applications of rotationally controlled van der Waals heterostructures
… the rotational control between different 2D layers. A hemispherical handle polymer stamp is introduced to improve 2D layer transfer, which allows rotational control when stacking 2D layers. To verify the accuracy of rotational control, we demonstrate a rotationally aligned double monolayer …
-
Flexible Piezoelectric Sensors Based on Single-Crystalline III-N Thin Films for Personal-Healthcare and Extreme-Environment Applications
… fabricate the flexible PPSs (F-PPSs), well-known layer-transfer method was applied to III-N thin films. This dissertation mainly covers five major topics using III-N thin film based F-PPSs. The first topic introduces that F-PPS was used for epidermic sensor with attachment on the temple area to …
-
Evaluation of a Silicon Carbide Stiffening Layer for Silicon-on-Glass Thin-Film Transistors
… investigated prior to 2010, involved the transfer of single crystal silicon layers onto glass substrates using an anodic bonding process to create the required substrates for the fabricating of single crystal silicon thin-film transistors (TFTs). The first TFTs made at RIT with SiOG showed …
-
ADVANCED NANOIMPRINT TECHNIQUE FOR MULTILAYER STRUCTURES AND FUNCTIONAL POLYMER APPLICATIONS
… complex tasks. Successful fabrication of 3D multilayer microstructures in thermoplastic polymers using optimized nanoimprint lithography techniques such as layer-transfer and transfer-bonding methods are developed in this dissertation work. The capability and flexibility of the techniques …
-
Mesoporous Germanium Layer Formation by Electrochemical Etching
… substrate and reduce costs. The application of a layer transfer process for multi-junction III-V semiconductor space solar cells is hence of main interest for all space agencies. Lift-off processes based on epitaxial growth of the absorber layer onto a porous etched substrate already exist for the …
-
Diffractive optics for thin-film silicon solar cells
… length becomes longer than the absorber layer thickness. If, in contrast, the incident light was redirected and trapped into the plane of the silicon slab, a thin-film could absorb as much light as a thick layer. Diffractive textures can not only efficiently scatter the low-energy …
-
Optical transitions in SiO2/crystalline Si/SiO2 quantum wells and nanocrystalline silicon (nc-Si)/SiO2 superlattice fabrication
… SOI wafers prepared by the ELTRAN (Epitaxial Layer TRANsfer) approach show the effect of quantum confinement without evidence of strong oxide interfacial transitions. In these wafers, evidence for an apparently ordered silicon oxide was found with 1.92?atomic fringe spacing along the (110) …
-
Development of a high performance ultra-thin silicon solar cell on steel substrate
… of this solar cell is grown on a porous silicon layer and is then exfoliated and transferred onto a foreign substrate. The kerfless ultra-thin silicon approach not only significantly decreases the demand of silicon used in solar cell fabrication, but also enables the potential to achieve higher …
Page 1 of 2